SportsAlpha Generation 6
2024 Chevrolet Camaro
Wheel Specs, Bolt Pattern, Towing & Reliability Guide
Max TowingNot rated
Curb Weight3,354 - 3,889 lbs
Bolt Pattern (PCD)5x120 mm
Lug Nut Torque140 lb-ft (190 Nm)
🚛
2024 Chevrolet Camaro Towing & Tongue Weight Limits
Official ratings for towing travel trailers, campers, boats, and payload cargo.
Max Tow CapacityNot rated
Max Payload CapacityNot rated
Max Tongue WeightNot rated
🛞
2024 Chevrolet Camaro Wheel Specs, Bolt Pattern & Offset
Factory wheel dimensions, center bore, and verified aftermarket fitment clearances.
OEM Factory Sizes
| Trim Level | Wheel Dimensions & Offset | Factory Tire Size |
|---|---|---|
| LT / SS (Front) | 20x8.5 ET25 | 245/40ZR20 |
| SS (Rear) | 20x9.5 ET39 | 275/35ZR20 |
Max Tire Size on Stock Suspension (Rubbing Clearance)
Aggressive Fitment
Recommended Wheel20x10 ET23
Recommended Tire285/30ZR20
🔍 Fits front without rubbing; excellent track setup.
⚡
Powertrain, Ground Clearance & Fuel Economy
Ground Clearance4.6 inches
Fuel Economy / Range16-22 City / 24-30 Hwy MPG
Engine Options3.6L V6 (335 hp), 6.2L V8 (455 hp), 6.2L Supercharged V8 (650 hp)
⚠️
2024 Chevrolet Camaro Common Problems & Reliability Issues
Known mechanical quirks, transmission behaviors, and critical service checks.
✕Manual transmission shifter and synchronization wear in track-used models
✕Differential fluid wear leading to shudder in automatic SS models
✕Infotainment screen software glitches and rearview camera failures
💡 Pre-Purchase Inspection Advice:Check for track wear, inspect suspension bushings, and verify service history on high-performance SS and ZL1 models.
❓
Frequently Asked Questions
Direct answers to common questions about 2024 Chevrolet Camaro fitment, towing, and maintenance.
What is the bolt pattern for a 2024 Chevrolet Camaro?
The bolt pattern is 5x120 mm with a 66.9 mm center bore and M14 x 1.5 thread size. The wheel torque specification is 140 lb-ft (190 Nm).
How much can a 2024 Chevrolet Camaro tow?
The 2024 Chevrolet Camaro is not rated for towing by the manufacturer.