FitmentSpec LogoFitmentSpec
SedanN18

2024 Nissan Versa

Wheel Specs, Bolt Pattern, Towing & Reliability Guide

Offset & Fitment Calculator→
Max TowingNot rated
Curb Weight2,599 - 2,730 lbs
Bolt Pattern (PCD)4x100 mm
Lug Nut Torque85 lb-ft (115 Nm)
🚛

2024 Nissan Versa Towing & Tongue Weight Limits

Official ratings for towing travel trailers, campers, boats, and payload cargo.

Max Tow CapacityNot rated
Max Payload Capacity939 - 1,070 lbs
Max Tongue WeightNot rated
🛞

2024 Nissan Versa Wheel Specs, Bolt Pattern & Offset

Factory wheel dimensions, center bore, and verified aftermarket fitment clearances.

OEM Factory Sizes

Trim LevelWheel Dimensions & OffsetFactory Tire Size
S / SV15x6.0 ET40195/65R15
SR16x6.5 ET40205/55R16

Max Tire Size on Stock Suspension (Rubbing Clearance)

Stock Flush
Recommended Wheel16x7.0 ET35
Recommended Tire205/50R16

🔍 Maintains speedo accuracy and clears inner liners.

⚡

Powertrain, Ground Clearance & Fuel Economy

Ground Clearance6.8 inches
Fuel Economy / Range32 City / 40 Hwy MPG (CVT) or 27 City / 35 Hwy MPG (Manual)
Engine Options1.6L Naturally Aspirated 4-Cylinder (HR16DE), 122 hp @ 6,300 rpm, 114 lb-ft @ 4,000 rpm
⚠️

2024 Nissan Versa Common Problems & Reliability Issues

Known mechanical quirks, transmission behaviors, and critical service checks.

✕CVT shudder or transmission whine in high-mileage scenarios
✕Windshield glass chipping propensity due to thin factory acoustic glass
💡 Pre-Purchase Inspection Advice:Check CVT fluid condition if purchasing a used high-mileage model. Ensure all Nissan Safety Shield 360 sensors and cameras are calibrated correctly after any bumper replacements.
❓

Frequently Asked Questions

Direct answers to common questions about 2024 Nissan Versa fitment, towing, and maintenance.

What is the bolt pattern for a 2024 Nissan Versa?

The bolt pattern is 4x100 mm, with a center bore of 60.1 mm, M12 x 1.25 thread size, and a torque specification of 85 lb-ft (115 Nm).

How much can a 2024 Nissan Versa tow?

The 2024 Nissan Versa is not rated for towing by the manufacturer.