FitmentSpec Logo
Audi logo
FY (2nd Gen Facelift) (2021–2026)

2023 Audi Q5

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2023 Audi Q5
Factory Powertrain 2.0L TFSI Turbocharged Inline-4 / 3.0L TFSI V6 (SQ5)
261 HP (195 kW) 273 lb-ft 2.0L Inline-4 Turbo / V6 Turbo
Chassis Dimensions Exterior & Curb Weight
L: 184.3" W: 74.4" WB: 111" 4,079 - 4,288 lbs lbs
Bolt Pattern5-Lug
5x112
Center BoreHub Centric
66.5 mm
Hub Ring Spigot Diameter
Offset RangeET
+30 to +45
Flush Target: ET +32
Lug TorqueM14 x 1.5
103 ft-lbs
140 Nm • Ball Seat
Fastener: Ball Seat R13 Radius Lug Bolt. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2023 Audi Q5 Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 4,400 lbs
Max Towing (Braked)
4,400 lbs
1,996 kg
With factory trailer brakes
Max Payload Capacity
1,058 lbs
480 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
440 lbs
200 kg
Maximum hitch downward load
Hitch Receiver Class
Class II/III (2-inch Receiver)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2023 Q5
Selected Load: 4,400 lbs • Vehicle Rating: 4,400 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Up to 4,400 lbs (2,000 kg) with factory trailer hitch on 45 TFSI / SQ5 models with standard quattro AWD.

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 1500 lbs (680 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2023 Audi Q5 Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2023 Audi Q5? The factory bolt pattern is 5x112 (5-lug) with a 66.5 mm center bore. The manufacturer specified wheel lug torque is 103 ft-lbs (140 Nm) using M14 x 1.5 Lug Bolts with a Ball Seat R13 Radius seating surface. Safe wheel offset range is +30mm to +45mm.

Factory OEM Wheel & Tire Configurations (2023)

2 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
Premium / 45 TFSI (19" 5-Arm Pylon) 19x8 ET+39
235/55R19 Compare ⚡
33 PSI Find Tires →
S line / Black Optic / SQ5 (20"-21" 5-Double-Spoke) 20x8 ET+39
255/45R20 Compare ⚡
35 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Audi Q5 factory 66.5 mm hub snout.

Factory Hub: 66.5mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +6.6 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 66.5mm (OD: 73.1mm / ID: 66.5mm)
🛒 Order 73.1mm to 66.5mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 8" ET39
New Wheel Width:9.0" (+1.0" vs OEM)
New Wheel Offset (ET):ET29 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x112
2021-2026 FITMENT SPECIFICATION

2023 Audi Q5

fitmentspec.com/audi/q5/2023
FINAL TORQUE103 ft-lbs(140 Nm)
Bolt Pattern (PCD)5x112
Center Bore66.5 mm
Fastener & ThreadM14 x 1.5Lug Bolt • Ball Seat R13 Radius
TPMS CalibrationIndirect Rotational Wheel Speed TPMSDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x112 bolt pattern and 66.5 mm hub bore.

✓ No Centering Rings Required
2020-202466.5 mm CB
Audi A4
Torque: 103 ft-lbsSpecs →
2018-202666.5 mm CB
Audi A5
Torque: 103 ft-lbsSpecs →
2019-202666.5 mm CB
Audi A6
Torque: 103 ft-lbsSpecs →
2017-202666.5 mm CB
Audi Q7
Torque: 103 ft-lbsSpecs →
2021-202666.5 mm CB
Audi RS6 Avant
Torque: 103 ft-lbsSpecs →
2020-202466.5 mm CB
Audi S4
Torque: 103 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +3.53" (+12.10%)
+12.10%
Original Baseline Tire235/55R19
New Target Tire285/70R17
QUICK SIZES:
29.2"32.7"
Speedometer Variance Table
30 mph gauge33.6 actual+3.6 mph
45 mph gauge50.4 actual+5.4 mph
60 mph gauge67.3 actual+7.3 mph
70 mph gauge78.5 actual+8.5 mph
80 mph gauge89.7 actual+9.7 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
215/65R17
Mounted on 17x7.0" Wheel
PCD: 5x112
Center Bore: 66.5 mm
🛡️ Technical Benefits for 2023 Audi Q5
⛷️ Higher Ground Pressure
A narrower tire (215mm vs 235mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+10% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

INDIRECT ROTATIONAL WHEEL SPEED TPMS TPMSABS Wheel Speed Based
Architecture
Indirect Wheel Speed ABS
Sensor Part Number
N/A (ABS Sensor)
Relearn Protocol
MMI Touchscreen Calibration
Relearn Sequence0 / 1 Steps Complete
1
Inflate tires to placard pressures (33-35 PSI front, 36-38 PSI rear). On MMI: Vehicle > Settings & Service > Tire Pressure Loss Indicator > Store Pressures.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2023 Q5

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2023 Audi Q5)

8 Verified Q&As
Q What is the bolt pattern for a 2023 Audi Q5?
The factory bolt pattern (PCD) for the 2023 Audi Q5 is 5x112 (5-lug configuration) with a pitch circle diameter of 112 mm. Center bore hub diameter is 66.5 mm.
Q What is the wheel lug torque specification for a 2023 Audi Q5?
The official factory wheel lug torque specification for the 2023 Audi Q5 is 103 ft-lbs (140 Nm). Tighten all Lug Bolts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2023 Audi Q5?
The official maximum braked towing capacity for the 2023 Audi Q5 is 4,400 lbs (1,996 kg) with a maximum tongue weight limit of 440 lbs. Recommended hitch receiver: Class II/III (2-inch Receiver). Unbraked trailer limit is 1,500 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2023 Audi Q5?
Factory stock tire sizing for the 2023 Audi Q5 is 235/55R19 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2023 Audi Q5 and are hub centric rings needed?
The center bore diameter is exactly 66.5 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 66.5mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2023 Audi Q5 use?
The 2023 Audi Q5 utilizes M14 x 1.5 Lug Bolts with a Ball Seat R13 Radius seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2023 Audi Q5 have Direct or Indirect TPMS and how is it reset?
This vehicle utilizes standard valve stems without requiring active electronic TPMS sensor recalibration.
Q What aftermarket wheel offset and tire sizes fit a 2023 Audi Q5 without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +30mm and +45mm with a flush target of ET +32. Always test clearance at full steering lock.