FitmentSpec Logo
Audi logo
4th Gen C8 (4.0L Twin-Turbo V8 MHEV Quattro Wagon) (2021–2026)

2023 Audi RS6 Avant

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2023 Audi RS6 Avant
OEM Powertrain Standard Specification
Chassis Dimensions Exterior & Curb Weight
Bolt Pattern5-Lug
5x112
Center BoreHub Centric
66.5 mm
Hub Ring Spigot Diameter
Offset RangeET
+15 to +25
Flush Target: ET +19
Lug TorqueM14 x 1.5
89 ft-lbs
120 Nm • Ball Seat
Fastener: Ball Seat R13 Lug Bolt. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2023 Audi RS6 Avant Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 1,000 lbs
Max Towing (Braked)
1,000 lbs
454 kg
With factory trailer brakes
Max Payload Capacity
850 lbs
386 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
100 lbs
45 kg
Maximum hitch downward load
Hitch Receiver Class
Class I (1.25-inch Receiver)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2023 RS6 Avant
Selected Load: 1,000 lbs • Vehicle Rating: 1,000 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Light duty towing up to 1,000 lbs. Recommended primarily for hitch-mounted accessories (bike racks, ski racks, cargo baskets).

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 350 lbs (159 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2023 Audi RS6 Avant Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2023 Audi RS6 Avant? The factory bolt pattern is 5x112 (5-lug) with a 66.5 mm center bore. The manufacturer specified wheel lug torque is 89 ft-lbs (120 Nm) using M14 x 1.5 Lug Bolts with a Ball Seat R13 seating surface. Safe wheel offset range is +15mm to +25mm.

Factory OEM Wheel & Tire Configurations (2023)

1 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
Performance (22" 5-V-Spoke Trapezoid Matte Black) 22x10.5 ET+19
285/30ZR22 Compare ⚡
32-35 PSI Placard Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Audi RS6 Avant factory 66.5 mm hub snout.

Factory Hub: 66.5mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +6.6 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 66.5mm (OD: 73.1mm / ID: 66.5mm)
🛒 Order 73.1mm to 66.5mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 10.5" ET19
New Wheel Width:11.5" (+1.0" vs OEM)
New Wheel Offset (ET):ET9 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x112
2021-2026 FITMENT SPECIFICATION

2023 Audi RS6 Avant

fitmentspec.com/audi/rs6-avant/2023
FINAL TORQUE89 ft-lbs(120 Nm)
Bolt Pattern (PCD)5x112
Center Bore66.5 mm
Fastener & ThreadM14 x 1.5Lug Bolt • Ball Seat R13
TPMS CalibrationDirectDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x112 bolt pattern and 66.5 mm hub bore.

✓ No Centering Rings Required
2020-202466.5 mm CB
Audi A4
Torque: 89 ft-lbsSpecs →
2018-202666.5 mm CB
Audi A5
Torque: 89 ft-lbsSpecs →
2019-202666.5 mm CB
Audi A6
Torque: 89 ft-lbsSpecs →
2021-202666.5 mm CB
Audi Q5
Torque: 89 ft-lbsSpecs →
2017-202666.5 mm CB
Audi Q7
Torque: 89 ft-lbsSpecs →
2020-202466.5 mm CB
Audi S4
Torque: 89 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +3.98" (+13.84%)
+13.84%
Original Baseline Tire285/30R22
New Target Tire285/70R17
QUICK SIZES:
28.7"32.7"
Speedometer Variance Table
30 mph gauge34.2 actual+4.2 mph
45 mph gauge51.2 actual+6.2 mph
60 mph gauge68.3 actual+8.3 mph
70 mph gauge79.7 actual+9.7 mph
80 mph gauge91.1 actual+11.1 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
215/55R20
Mounted on 20x9.5" Wheel
PCD: 5x112
Center Bore: 66.5 mm
🛡️ Technical Benefits for 2023 Audi RS6 Avant
⛷️ Higher Ground Pressure
A narrower tire (215mm vs 235mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+10% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TPMS433 MHz
Architecture
Direct Valve Stem Transducer
Sensor Part Number
N/A (ABS Sensor)
Relearn Protocol
Auto-Relearn Drive Cycle
Relearn Sequence0 / 1 Steps Complete
1
Drive vehicle above 15 mph (25 km/h) for up to 20 minutes to automatically synchronize sensor IDs.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2023 RS6 Avant

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2023 Audi RS6 Avant)

8 Verified Q&As
Q What is the bolt pattern for a 2023 Audi RS6 Avant?
The factory bolt pattern (PCD) for the 2023 Audi RS6 Avant is 5x112 (5-lug configuration) with a pitch circle diameter of 112 mm. Center bore hub diameter is 66.5 mm.
Q What is the wheel lug torque specification for a 2023 Audi RS6 Avant?
The official factory wheel lug torque specification for the 2023 Audi RS6 Avant is 89 ft-lbs (120 Nm). Tighten all Lug Bolts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2023 Audi RS6 Avant?
The official maximum braked towing capacity for the 2023 Audi RS6 Avant is 1,000 lbs (454 kg) with a maximum tongue weight limit of 100 lbs. Recommended hitch receiver: Class I (1.25-inch Receiver). Unbraked trailer limit is 350 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2023 Audi RS6 Avant?
Factory stock tire sizing for the 2023 Audi RS6 Avant is 285/30ZR22 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2023 Audi RS6 Avant and are hub centric rings needed?
The center bore diameter is exactly 66.5 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 66.5mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2023 Audi RS6 Avant use?
The 2023 Audi RS6 Avant utilizes M14 x 1.5 Lug Bolts with a Ball Seat R13 seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2023 Audi RS6 Avant have Direct or Indirect TPMS and how is it reset?
It features a Direct TPMS system utilizing physical valve-stem pressure sensors operating at 433 MHz. The relearn protocol is Auto-Relearn Drive Cycle: Drive vehicle above 15 mph (25 km/h) for up to 20 minutes to automatically synchronize sensor IDs.
Q What aftermarket wheel offset and tire sizes fit a 2023 Audi RS6 Avant without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +15mm and +25mm with a flush target of ET +19. Always test clearance at full steering lock.