FitmentSpec Logo
Bentley logo
Bentayga V8 / Speed W12 / EWB (Extended Wheelbase) (2016–2026)

2020 Bentley Bentayga

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2020 Bentley Bentayga
Factory Powertrain 4.0L Twin-Turbo V8 (542 hp) / 6.0L W12 (Speed: 626 hp / 664 lb-ft)
626 HP
Chassis Dimensions Exterior & Curb Weight
WB: 117.9"
Bolt Pattern5-Lug
5x130
Center BoreHub Centric
71.6 mm
Hub Ring Spigot Diameter
Offset RangeET
+22 to +36
Flush Target: ET +28
Lug TorqueM14 x 1.5
133 ft-lbs
180 Nm • Ball Seat
Fastener: Ball Seat R14 Radius Lug Bolt. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2020 Bentley Bentayga Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 7,700 lbs
Max Towing (Braked)
7,700 lbs
3,493 kg
With factory trailer brakes
Max Payload Capacity
1,650 lbs
748 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
770 lbs
349 kg
Maximum hitch downward load
Hitch Receiver Class
Class IV (2-inch Receiver)
Weight distribution rated
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2020 Bentayga
Selected Load: 7,700 lbs • Vehicle Rating: 7,700 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Factory full-size chassis with recommended Class IV hitch receiver and electronic trailer stability control.

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 1500 lbs (680 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2020 Bentley Bentayga Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2020 Bentley Bentayga? The factory bolt pattern is 5x130 (5-lug) with a 71.6 mm center bore. The manufacturer specified wheel lug torque is 133 ft-lbs (180 Nm) using M14 x 1.5 Lug Bolts with a Ball Seat R14 Radius seating surface. Safe wheel offset range is +22mm to +36mm.

Factory OEM Wheel & Tire Configurations (2020)

1 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
Bentayga Speed (22" Speed Wheel - Dark Tint Finish) 22x10 ET+28
285/40ZR22 (Pirelli P Zero B) Compare ⚡
38 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Bentley Bentayga factory 71.6 mm hub snout.

Factory Hub: 71.6mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +1.5 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 71.6mm (OD: 73.1mm / ID: 71.6mm)
🛒 Order 73.1mm to 71.6mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 10" ET28
New Wheel Width:11.0" (+1.0" vs OEM)
New Wheel Offset (ET):ET18 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x130
2016-2026 FITMENT SPECIFICATION

2020 Bentley Bentayga

fitmentspec.com/bentley/bentayga/2020
FINAL TORQUE133 ft-lbs(180 Nm)
Bolt Pattern (PCD)5x130
Center Bore71.6 mm
Fastener & ThreadM14 x 1.5Lug Bolt • Ball Seat R14 Radius
TPMS CalibrationDirectDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x130 bolt pattern and 71.6 mm hub bore.

✓ No Centering Rings Required
2018-202671.6 mm CB
Bentley Continental GT
Torque: 133 ft-lbsSpecs →
2018-202671.6 mm CB
Lamborghini Urus
Torque: 133 ft-lbsSpecs →
2017-202671.6 mm CB
Porsche 718 Cayman
Torque: 133 ft-lbsSpecs →
2017-202671.6 mm CB
Porsche 718 Cayman
Torque: 133 ft-lbsSpecs →
2020-202671.6 mm CB
Porsche 911
Torque: 133 ft-lbsSpecs →
2019-202671.6 mm CB
Porsche Cayenne
Torque: 133 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Significant DifferenceDiameter: +1.73" (+5.59%)
+5.59%
Original Baseline Tire285/40R22
New Target Tire285/70R17
QUICK SIZES:
31.0"32.7"
Speedometer Variance Table
30 mph gauge31.7 actual+1.7 mph
45 mph gauge47.5 actual+2.5 mph
60 mph gauge63.4 actual+3.4 mph
70 mph gauge73.9 actual+3.9 mph
80 mph gauge84.5 actual+4.5 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
215/55R20
Mounted on 20x9.0" Wheel
PCD: 5x130
Center Bore: 71.6 mm
🛡️ Technical Benefits for 2020 Bentley Bentayga
⛷️ Higher Ground Pressure
A narrower tire (215mm vs 235mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+10% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TPMS433 MHz
Architecture
Direct Valve Stem Transducer
Sensor Part Number
N/A (ABS Sensor)
Relearn Protocol
Auto-Relearn Drive Cycle
Relearn Sequence0 / 1 Steps Complete
1
Drive vehicle above 15 mph (25 km/h) for up to 20 minutes to automatically synchronize sensor IDs.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2020 Bentayga

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2020 Bentley Bentayga)

8 Verified Q&As
Q What is the bolt pattern for a 2020 Bentley Bentayga?
The factory bolt pattern (PCD) for the 2020 Bentley Bentayga is 5x130 (5-lug configuration) with a pitch circle diameter of 130 mm. Center bore hub diameter is 71.6 mm.
Q What is the wheel lug torque specification for a 2020 Bentley Bentayga?
The official factory wheel lug torque specification for the 2020 Bentley Bentayga is 133 ft-lbs (180 Nm). Tighten all Lug Bolts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2020 Bentley Bentayga?
The official maximum braked towing capacity for the 2020 Bentley Bentayga is 7,700 lbs (3,493 kg) with a maximum tongue weight limit of 770 lbs. Recommended hitch receiver: Class IV (2-inch Receiver). Unbraked trailer limit is 1,500 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2020 Bentley Bentayga?
Factory stock tire sizing for the 2020 Bentley Bentayga is 285/40ZR22 (Pirelli P Zero B) with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2020 Bentley Bentayga and are hub centric rings needed?
The center bore diameter is exactly 71.6 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 71.6mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2020 Bentley Bentayga use?
The 2020 Bentley Bentayga utilizes M14 x 1.5 Lug Bolts with a Ball Seat R14 Radius seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2020 Bentley Bentayga have Direct or Indirect TPMS and how is it reset?
It features a Direct TPMS system utilizing physical valve-stem pressure sensors operating at 433 MHz. The relearn protocol is Auto-Relearn Drive Cycle: Drive vehicle above 15 mph (25 km/h) for up to 20 minutes to automatically synchronize sensor IDs.
Q What aftermarket wheel offset and tire sizes fit a 2020 Bentley Bentayga without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +22mm and +36mm with a flush target of ET +28. Always test clearance at full steering lock.