FitmentSpec Logo
BMW logo
6th/7th Gen F90/G90 (Competition / CS / Hybrid V8) (2018–2026)

2022 BMW M5

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2022 BMW M5
Factory Powertrain 4.4L M TwinPower Turbo V8 (600-717 hp M Hybrid)
617 HP
Chassis Dimensions Exterior & Curb Weight
WB: 117.4"
Bolt Pattern5-Lug
5x112
Center BoreHub Centric
66.6 mm
Hub Ring Spigot Diameter
Offset RangeET
+26 to +38
Flush Target: ET +28
Lug TorqueM14 x 1.25
103 ft-lbs
140 Nm • Conical Seat
Fastener: Conical Seat 60 Degree Lug Bolt. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2022 BMW M5 Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 1,000 lbs
Max Towing (Braked)
1,000 lbs
454 kg
With factory trailer brakes
Max Payload Capacity
850 lbs
386 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
100 lbs
45 kg
Maximum hitch downward load
Hitch Receiver Class
Class I (1.25-inch Receiver)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2022 M5
Selected Load: 1,000 lbs • Vehicle Rating: 1,000 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Light duty towing up to 1,000 lbs. Recommended primarily for hitch-mounted accessories (bike racks, ski racks, cargo baskets).

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 350 lbs (159 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2022 BMW M5 Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2022 BMW M5? The factory bolt pattern is 5x112 (5-lug) with a 66.6 mm center bore. The manufacturer specified wheel lug torque is 103 ft-lbs (140 Nm) using M14 x 1.25 Lug Bolts with a Conical Seat 60 Degree seating surface. Safe wheel offset range is +26mm to +38mm.

Factory OEM Wheel & Tire Configurations (2022)

1 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
M5 Competition (20" M Y-Spoke Style 789M Forged) 20x9.5 ET+28
275/35ZR20 Compare ⚡
35 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for BMW M5 factory 66.6 mm hub snout.

Factory Hub: 66.6mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +6.5 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 66.6mm (OD: 73.1mm / ID: 66.6mm)
🛒 Order 73.1mm to 66.6mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 9.5" ET28
New Wheel Width:10.5" (+1.0" vs OEM)
New Wheel Offset (ET):ET18 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x112
2018-2026 FITMENT SPECIFICATION

2022 BMW M5

fitmentspec.com/bmw/m5/2022
FINAL TORQUE103 ft-lbs(140 Nm)
Bolt Pattern (PCD)5x112
Center Bore66.6 mm
Fastener & ThreadM14 x 1.25Lug Bolt • Conical Seat 60 Degree
TPMS CalibrationDirectDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x112 bolt pattern and 66.6 mm hub bore.

✓ No Centering Rings Required
2020-202466.5 mm CB
Audi A4
Torque: 103 ft-lbsSpecs →
2018-202666.5 mm CB
Audi A5
Torque: 103 ft-lbsSpecs →
2019-202666.5 mm CB
Audi A6
Torque: 103 ft-lbsSpecs →
2021-202666.5 mm CB
Audi Q5
Torque: 103 ft-lbsSpecs →
2017-202666.5 mm CB
Audi Q7
Torque: 103 ft-lbsSpecs →
2021-202666.5 mm CB
Audi RS6 Avant
Torque: 103 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +5.13" (+18.60%)
+18.60%
Original Baseline Tire275/35R20
New Target Tire285/70R17
QUICK SIZES:
27.6"32.7"
Speedometer Variance Table
30 mph gauge35.6 actual+5.6 mph
45 mph gauge53.4 actual+8.4 mph
60 mph gauge71.2 actual+11.2 mph
70 mph gauge83.0 actual+13.0 mph
80 mph gauge94.9 actual+14.9 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
215/55R18
Mounted on 18x8.5" Wheel
PCD: 5x112
Center Bore: 66.6 mm
🛡️ Technical Benefits for 2022 BMW M5
⛷️ Higher Ground Pressure
A narrower tire (215mm vs 235mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+10% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TPMS433 MHz
Architecture
Direct Valve Stem Transducer
Sensor Part Number
N/A (ABS Sensor)
Relearn Protocol
Auto-Relearn Drive Cycle
Relearn Sequence0 / 1 Steps Complete
1
Drive vehicle above 15 mph (25 km/h) for up to 20 minutes to automatically synchronize sensor IDs.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2022 M5

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2022 BMW M5)

8 Verified Q&As
Q What is the bolt pattern for a 2022 BMW M5?
The factory bolt pattern (PCD) for the 2022 BMW M5 is 5x112 (5-lug configuration) with a pitch circle diameter of 112 mm. Center bore hub diameter is 66.6 mm.
Q What is the wheel lug torque specification for a 2022 BMW M5?
The official factory wheel lug torque specification for the 2022 BMW M5 is 103 ft-lbs (140 Nm). Tighten all Lug Bolts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2022 BMW M5?
The official maximum braked towing capacity for the 2022 BMW M5 is 1,000 lbs (454 kg) with a maximum tongue weight limit of 100 lbs. Recommended hitch receiver: Class I (1.25-inch Receiver). Unbraked trailer limit is 350 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2022 BMW M5?
Factory stock tire sizing for the 2022 BMW M5 is 275/35ZR20 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2022 BMW M5 and are hub centric rings needed?
The center bore diameter is exactly 66.6 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 66.6mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2022 BMW M5 use?
The 2022 BMW M5 utilizes M14 x 1.25 Lug Bolts with a Conical Seat 60 Degree seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2022 BMW M5 have Direct or Indirect TPMS and how is it reset?
It features a Direct TPMS system utilizing physical valve-stem pressure sensors operating at 433 MHz. The relearn protocol is Auto-Relearn Drive Cycle: Drive vehicle above 15 mph (25 km/h) for up to 20 minutes to automatically synchronize sensor IDs.
Q What aftermarket wheel offset and tire sizes fit a 2022 BMW M5 without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +26mm and +38mm with a flush target of ET +28. Always test clearance at full steering lock.