FitmentSpec Logo
Chevrolet logo
10th Gen (Super Epsilon) (2014–2020)

2015 Chevrolet Impala

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2015 Chevrolet Impala
Factory Powertrain 3.6L V6 VVT Direct Injection LFX
305 HP (227 kW) 264 lb-ft 3.6L V6
Chassis Dimensions Exterior & Curb Weight
L: 201.3" W: 73" WB: 111.7" 3,811 - 3,920 lbs lbs
Bolt Pattern5-Lug
5x120
Center BoreHub Centric
66.9 mm
Hub Ring Spigot Diameter
Offset RangeET
+35 to +45
Flush Target: ET +35
Lug TorqueM14 x 1.5
140 ft-lbs
190 Nm • Conical Seat
Fastener: Conical 60 Degree Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2015 Chevrolet Impala Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 1,000 lbs
Max Towing (Braked)
1,000 lbs
454 kg
With factory trailer brakes
Max Payload Capacity
850 lbs
386 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
100 lbs
45 kg
Maximum hitch downward load
Hitch Receiver Class
Class I (1.25-inch Receiver)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2015 Impala
Selected Load: 1,000 lbs • Vehicle Rating: 1,000 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Light duty towing up to 1,000 lbs. Recommended primarily for hitch-mounted accessories (bike racks, ski racks, cargo baskets).

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 350 lbs (159 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2015 Chevrolet Impala Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2015 Chevrolet Impala? The factory bolt pattern is 5x120 (5-lug) with a 66.9 mm center bore. The manufacturer specified wheel lug torque is 140 ft-lbs (190 Nm) using M14 x 1.5 Lug Nuts with a Conical 60 Degree seating surface. Safe wheel offset range is +35mm to +45mm.

Factory OEM Wheel & Tire Configurations (2015)

2 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
LT (18" Painted Alloy) 18x8 ET+42
235/50R18 Compare ⚡
35 PSI Find Tires →
Premier (20" Machine-Faced with Silver Pockets) 20x8.5 ET+42
245/40R20 Compare ⚡
35 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Chevrolet Impala factory 66.9 mm hub snout.

Factory Hub: 66.9mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +6.2 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 66.9mm (OD: 73.1mm / ID: 66.9mm)
🛒 Order 73.1mm to 66.9mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 8" ET42
New Wheel Width:9.0" (+1.0" vs OEM)
New Wheel Offset (ET):ET32 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x120
2014-2020 FITMENT SPECIFICATION

2015 Chevrolet Impala

fitmentspec.com/chevrolet/impala/2015
FINAL TORQUE140 ft-lbs(190 Nm)
Bolt Pattern (PCD)5x120
Center Bore66.9 mm
Fastener & ThreadM14 x 1.5Lug Nut • Conical 60 Degree
TPMS CalibrationDirect Tire Pressure SensorDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x120 bolt pattern and 66.9 mm hub bore.

✓ No Centering Rings Required
2020-202667.1 mm CB
Cadillac CT5
Torque: 140 ft-lbsSpecs →
2022-202666.9 mm CB
Cadillac CT5-V Blackwing
Torque: 140 ft-lbsSpecs →
2016-202466.9 mm CB
Chevrolet Camaro
Torque: 140 ft-lbsSpecs →
2016-202466.9 mm CB
Chevrolet Camaro
Torque: 140 ft-lbsSpecs →
2023-202666.9 mm CB
Chevrolet Corvette
Torque: 140 ft-lbsSpecs →
2020-202666.9 mm CB
Chevrolet Corvette
Torque: 140 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +5.46" (+20.02%)
+20.02%
Original Baseline Tire235/50R18
New Target Tire285/70R17
QUICK SIZES:
27.3"32.7"
Speedometer Variance Table
30 mph gauge36.0 actual+6.0 mph
45 mph gauge54.0 actual+9.0 mph
60 mph gauge72.0 actual+12.0 mph
70 mph gauge84.0 actual+14.0 mph
80 mph gauge96.0 actual+16.0 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
225/55R17
Mounted on 17x7.0" Wheel
PCD: 5x120
Center Bore: 66.9 mm
🛡️ Technical Benefits for 2015 Chevrolet Impala
⛷️ Higher Ground Pressure
A narrower tire (225mm vs 235mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+5% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TIRE PRESSURE SENSOR TPMS315 MHz
Architecture
Indirect Wheel Speed ABS
Sensor Part Number
13598772
Relearn Protocol
DIC Relearn / GM Tool
Relearn Sequence0 / 1 Steps Complete
1
Enter learn mode in cluster settings. Trigger LF, RF, RR, LR sensors sequentially until horn sounds.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2015 Impala

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2015 Chevrolet Impala)

8 Verified Q&As
Q What is the bolt pattern for a 2015 Chevrolet Impala?
The factory bolt pattern (PCD) for the 2015 Chevrolet Impala is 5x120 (5-lug configuration) with a pitch circle diameter of 120 mm. Center bore hub diameter is 66.9 mm.
Q What is the wheel lug torque specification for a 2015 Chevrolet Impala?
The official factory wheel lug torque specification for the 2015 Chevrolet Impala is 140 ft-lbs (190 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2015 Chevrolet Impala?
The official maximum braked towing capacity for the 2015 Chevrolet Impala is 1,000 lbs (454 kg) with a maximum tongue weight limit of 100 lbs. Recommended hitch receiver: Class I (1.25-inch Receiver). Unbraked trailer limit is 350 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2015 Chevrolet Impala?
Factory stock tire sizing for the 2015 Chevrolet Impala is 235/50R18 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2015 Chevrolet Impala and are hub centric rings needed?
The center bore diameter is exactly 66.9 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 66.9mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2015 Chevrolet Impala use?
The 2015 Chevrolet Impala utilizes M14 x 1.5 Lug Nuts with a Conical 60 Degree seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2015 Chevrolet Impala have Direct or Indirect TPMS and how is it reset?
This vehicle utilizes standard valve stems without requiring active electronic TPMS sensor recalibration.
Q What aftermarket wheel offset and tire sizes fit a 2015 Chevrolet Impala without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +35mm and +45mm with a flush target of ET +35. Always test clearance at full steering lock.