FitmentSpec Logo
Chevrolet logo
2nd Gen (LS / 1RS / LT / 2RS / ACTIV) (2024–2026)

2024 Chevrolet Trax

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2024 Chevrolet Trax
Factory Powertrain 1.2L Turbocharged ECOTEC Inline-3 (137 hp / 162 lb-ft)
137 HP
Chassis Dimensions Exterior & Curb Weight
WB: 106.3"
Bolt Pattern5-Lug
5x105
Center BoreHub Centric
56.6 mm
Hub Ring Spigot Diameter
Offset RangeET
+38 to +48
Flush Target: ET +42
Lug TorqueM12 x 1.5
100 ft-lbs
140 Nm • Cone Seat
Fastener: Cone 60° (Conical) Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2024 Chevrolet Trax Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 1,000 lbs
Max Towing (Braked)
1,000 lbs
454 kg
With factory trailer brakes
Max Payload Capacity
1,003 lbs
455 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
100 lbs
45 kg
Maximum hitch downward load
Hitch Receiver Class
Class I (1.25-inch Hitch - Cargo/Bike only)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2024 Trax
Selected Load: 1,000 lbs • Vehicle Rating: 1,000 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Manufacturer does not recommend trailer towing for the 1.2L 3-cylinder front-wheel-drive Trax. Hitch receiver suitable primarily for hitch-mounted bike racks and cargo baskets (up to 200 lbs tongue weight).

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 350 lbs (159 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2024 Chevrolet Trax Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2024 Chevrolet Trax? The factory bolt pattern is 5x105 (5-lug) with a 56.6 mm center bore. The manufacturer specified wheel lug torque is 100 ft-lbs (140 Nm) using M12 x 1.5 Lug Nuts with a Cone 60° (Conical) seating surface. Safe wheel offset range is +38mm to +48mm.

Factory OEM Wheel & Tire Configurations (2024)

3 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
LS / 1RS (17" Steel / Painted Aluminum Wheels) 17x7 ET+42
225/60R17 99H All-Season Compare ⚡
35 PSI Find Tires →
ACTIV / LT (18" Black Aluminum Wheels) 18x7.5 ET+44
225/55R18 98H All-Season Compare ⚡
35 PSI Find Tires →
2RS (19" Machined Two-Tone RS Wheels) 19x8 ET+46
245/45R19 98H All-Season Compare ⚡
35 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Chevrolet Trax factory 56.6 mm hub snout.

Factory Hub: 56.6mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +16.5 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 56.6mm (OD: 73.1mm / ID: 56.6mm)
🛒 Order 73.1mm to 56.6mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 7" ET42
New Wheel Width:8.0" (+1.0" vs OEM)
New Wheel Offset (ET):ET32 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x105
2024-2026 FITMENT SPECIFICATION

2024 Chevrolet Trax

fitmentspec.com/chevrolet/trax/2024
FINAL TORQUE100 ft-lbs(140 Nm)
Bolt Pattern (PCD)5x105
Center Bore56.6 mm
Fastener & ThreadM12 x 1.5Lug Nut • Cone 60° (Conical)
TPMS CalibrationDirectDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x105 bolt pattern and 56.6 mm hub bore.

✓ No Centering Rings Required
2017-202356.6 mm CB
Chevrolet Bolt EV
Torque: 100 ft-lbsSpecs →
2016-201956.6 mm CB
Chevrolet Cruze
Torque: 100 ft-lbsSpecs →
🔄

Cross-Vehicle OEM Wheel Swap Compatibility (5x105)

Verified OEM donor vehicles whose factory wheels fit the Chevrolet Trax hub (56.6mm).

Wheel Swap Calculator →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +5.08" (+18.38%)
+18.38%
Original Baseline Tire225/60R17
New Target Tire285/70R17
QUICK SIZES:
27.6"32.7"
Speedometer Variance Table
30 mph gauge35.5 actual+5.5 mph
45 mph gauge53.3 actual+8.3 mph
60 mph gauge71.0 actual+11.0 mph
70 mph gauge82.9 actual+12.9 mph
80 mph gauge94.7 actual+14.7 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
215/65R16
Mounted on 16x6.5" Wheel
PCD: 5x105
Center Bore: 56.6 mm
🛡️ Technical Benefits for 2024 Chevrolet Trax
⛷️ Higher Ground Pressure
A narrower tire (215mm vs 225mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+5% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TPMS433 MHz
Architecture
Direct Valve Stem Transducer
Sensor Part Number
N/A (ABS Sensor)
Relearn Protocol
Auto-Relearn Drive Cycle
Relearn Sequence0 / 1 Steps Complete
1
Drive vehicle above 15 mph (25 km/h) for up to 20 minutes to automatically synchronize sensor IDs.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2024 Trax

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2024 Chevrolet Trax)

8 Verified Q&As
Q What is the bolt pattern for a 2024 Chevrolet Trax?
The factory bolt pattern (PCD) for the 2024 Chevrolet Trax is 5x105 (5-lug configuration) with a pitch circle diameter of 105 mm. Center bore hub diameter is 56.6 mm.
Q What is the wheel lug torque specification for a 2024 Chevrolet Trax?
The official factory wheel lug torque specification for the 2024 Chevrolet Trax is 100 ft-lbs (140 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2024 Chevrolet Trax?
The official maximum braked towing capacity for the 2024 Chevrolet Trax is 1,000 lbs (454 kg) with a maximum tongue weight limit of 100 lbs. Recommended hitch receiver: Class I (1.25-inch Hitch - Cargo/Bike only). Unbraked trailer limit is 350 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2024 Chevrolet Trax?
Factory stock tire sizing for the 2024 Chevrolet Trax is 225/60R17 99H All-Season with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2024 Chevrolet Trax and are hub centric rings needed?
The center bore diameter is exactly 56.6 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 56.6mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2024 Chevrolet Trax use?
The 2024 Chevrolet Trax utilizes M12 x 1.5 Lug Nuts with a Cone 60° (Conical) seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2024 Chevrolet Trax have Direct or Indirect TPMS and how is it reset?
It features a Direct TPMS system utilizing physical valve-stem pressure sensors operating at 433 MHz. The relearn protocol is Auto-Relearn Drive Cycle: Drive vehicle above 15 mph (25 km/h) for up to 20 minutes to automatically synchronize sensor IDs.
Q What aftermarket wheel offset and tire sizes fit a 2024 Chevrolet Trax without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +38mm and +48mm with a flush target of ET +42. Always test clearance at full steering lock.