FitmentSpec Logo
Chrysler logo
RU (1st Gen Facelift) (2017–2026)

2026 Chrysler Pacifica

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2026 Chrysler Pacifica
Factory Powertrain Powertrain
287 HP
Chassis Dimensions Exterior & Curb Weight
WB: 120.9"
Bolt Pattern5-Lug
5x127
Center BoreHub Centric
71.5 mm
Hub Ring Spigot Diameter
Offset RangeET
+25 to +48
Flush Target: ET +20
Lug TorqueM12 x 1.5
100 ft-lbs
136 Nm • Conical Seat
Fastener: Conical 60 Degree Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2026 Chrysler Pacifica Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 3,600 lbs
Max Towing (Braked)
3,600 lbs
1,633 kg
With factory trailer brakes
Max Payload Capacity
1,725 lbs
782 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
360 lbs
163 kg
Maximum hitch downward load
Hitch Receiver Class
Class II (2-inch Receiver)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2026 Pacifica
Selected Load: 3,600 lbs • Vehicle Rating: 3,600 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Best-in-class 3,600 lbs towing with 3.6L V6 and factory Trailer Tow Group (includes 220-amp alternator and heavy-duty radiator). Plug-in Hybrid not rated for towing.

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 1260 lbs (572 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2026 Chrysler Pacifica Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2026 Chrysler Pacifica? The factory bolt pattern is 5x127 (5-lug) with a 71.5 mm center bore. The manufacturer specified wheel lug torque is 100 ft-lbs (136 Nm) using M12 x 1.5 Lug Nuts with a Conical 60 Degree seating surface. Safe wheel offset range is +25mm to +48mm.

Factory OEM Wheel & Tire Configurations (2026)

1 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
Factory Spec Package 18x7.5 ET40
235/60R18 Compare ⚡
32-35 PSI Placard Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Chrysler Pacifica factory 71.5 mm hub snout.

Factory Hub: 71.5mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +1.6 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 71.5mm (OD: 73.1mm / ID: 71.5mm)
🛒 Order 73.1mm to 71.5mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 7.5" ET40
New Wheel Width:8.5" (+1.0" vs OEM)
New Wheel Offset (ET):ET30 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x127
2017-2026 FITMENT SPECIFICATION

2026 Chrysler Pacifica

fitmentspec.com/chrysler/pacifica/2026
FINAL TORQUE100 ft-lbs(136 Nm)
Bolt Pattern (PCD)5x127
Center Bore71.5 mm
Fastener & ThreadM12 x 1.5Lug Nut • Conical 60 Degree
TPMS CalibrationDirect (Wireless TPMS)Door Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x127 bolt pattern and 71.5 mm hub bore.

✓ No Centering Rings Required
2011-202671.5 mm CB
Dodge Durango
Torque: 100 ft-lbsSpecs →
2018-202671.5 mm CB
Dodge Durango
Torque: 100 ft-lbsSpecs →
2020-202671.5 mm CB
Jeep Gladiator
Torque: 100 ft-lbsSpecs →
2021-202671.5 mm CB
Jeep Grand Cherokee
Torque: 100 ft-lbsSpecs →
2021-202671.5 mm CB
Jeep Grand Cherokee L
Torque: 100 ft-lbsSpecs →
2018-202671.5 mm CB
Jeep Wrangler
Torque: 100 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +3.61" (+12.39%)
+12.39%
Original Baseline Tire235/60R18
New Target Tire285/70R17
QUICK SIZES:
29.1"32.7"
Speedometer Variance Table
30 mph gauge33.7 actual+3.7 mph
45 mph gauge50.6 actual+5.6 mph
60 mph gauge67.4 actual+7.4 mph
70 mph gauge78.7 actual+8.7 mph
80 mph gauge89.9 actual+9.9 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
225/65R17
Mounted on 17x6.5" Wheel
PCD: 5x127
Center Bore: 71.5 mm
🛡️ Technical Benefits for 2026 Chrysler Pacifica
⛷️ Higher Ground Pressure
A narrower tire (225mm vs 235mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+5% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT (WIRELESS TPMS) TPMS433 MHz / 315 MHz MHz
Architecture
Indirect Wheel Speed ABS
Sensor Part Number
OEM Precision Sensor
Relearn Protocol
Auto-Relearn
Relearn Sequence0 / 2 Steps Complete
1
Inflate cold tires to door placard pressure.
2
Drive vehicle above 20 mph for 15-20 minutes for auto-sync.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →

📋 One-Click Forum Spec Exporter

Export verified specs for enthusiast forums (vBulletin, XenForo, Reddit).

🔩

Verified Hardware & Installation Kit for 2026 Pacifica

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2026 Chrysler Pacifica)

8 Verified Q&As
Q What is the bolt pattern for a 2026 Chrysler Pacifica?
The factory bolt pattern (PCD) for the 2026 Chrysler Pacifica is 5x127 (5-lug configuration) with a pitch circle diameter of 127 mm. Center bore hub diameter is 71.5 mm.
Q What is the wheel lug torque specification for a 2026 Chrysler Pacifica?
The official factory wheel lug torque specification for the 2026 Chrysler Pacifica is 100 ft-lbs (136 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2026 Chrysler Pacifica?
The official maximum braked towing capacity for the 2026 Chrysler Pacifica is 3,600 lbs (1,633 kg) with a maximum tongue weight limit of 360 lbs. Recommended hitch receiver: Class II (2-inch Receiver). Unbraked trailer limit is 1,260 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2026 Chrysler Pacifica?
Factory stock tire sizing for the 2026 Chrysler Pacifica is 235/60R18 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2026 Chrysler Pacifica and are hub centric rings needed?
The center bore diameter is exactly 71.5 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 71.5mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2026 Chrysler Pacifica use?
The 2026 Chrysler Pacifica utilizes M12 x 1.5 Lug Nuts with a Conical 60 Degree seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2026 Chrysler Pacifica have Direct or Indirect TPMS and how is it reset?
This vehicle utilizes standard valve stems without requiring active electronic TPMS sensor recalibration.
Q What aftermarket wheel offset and tire sizes fit a 2026 Chrysler Pacifica without rubbing?
For an aggressive yet flush aesthetic without fender rolling or rubbing, the recommended setup is 18x7.5 ET40 wheels with 235/60R18 tires. For a 100% rub-free conservative upgrade, choose 18x7.5 ET40 with 235/60R18. Factory safe offset range spans +25mm to +48mm.