FitmentSpec Logo
Ford logo
CX430 (1st Gen) (2021–2026)

2022 Ford Bronco Sport

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2022 Ford Bronco Sport
Factory Powertrain 1.5L EcoBoost I3 / 2.0L EcoBoost I4
250 HP (186 kW) 277 lb-ft 2.0L Inline-4
Chassis Dimensions Exterior & Curb Weight
L: 172.7" W: 74.3" WB: 105.1" 3,467 - 3,707 lbs lbs
Bolt Pattern5-Lug
5x108
Center BoreHub Centric
63.4 mm
Hub Ring Spigot Diameter
Offset RangeET
+35 to +45
Flush Target: ET +35
Lug TorqueM14 x 1.5
150 ft-lbs
204 Nm • Conical Seat
Fastener: Conical 60 Degree Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2022 Ford Bronco Sport Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 2,200 lbs
Max Towing (Braked)
2,200 lbs
998 kg
With factory trailer brakes
Max Payload Capacity
1,050 lbs
476 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
220 lbs
100 kg
Maximum hitch downward load
Hitch Receiver Class
Class II (Class II Trailer Tow Package)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2022 Bronco Sport
Selected Load: 2,200 lbs • Vehicle Rating: 2,200 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Badlands trim with 2.0L EcoBoost rated at 2,200 lbs with Class II Trailer Tow Package; 1.5L trims rated at 2,000 lbs.

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 770 lbs (349 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2022 Ford Bronco Sport Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2022 Ford Bronco Sport? The factory bolt pattern is 5x108 (5-lug) with a 63.4 mm center bore. The manufacturer specified wheel lug torque is 150 ft-lbs (204 Nm) using M14 x 1.5 Lug Nuts with a Conical 60 Degree seating surface. Safe wheel offset range is +35mm to +45mm.

Factory OEM Wheel & Tire Configurations (2022)

2 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
Base / Big Bend / Outer Banks (17"-18") 17x7 ET+37.5
225/65R17 Compare ⚡
33 PSI Find Tires →
Badlands (17" All-Terrain) 17x7 ET+37.5
235/65R17 (Falken Wildpeak A/T) Compare ⚡
33 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Ford Bronco Sport factory 63.4 mm hub snout.

Factory Hub: 63.4mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +9.7 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 63.4mm (OD: 73.1mm / ID: 63.4mm)
🛒 Order 73.1mm to 63.4mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 7" ET37.5
New Wheel Width:8.0" (+1.0" vs OEM)
New Wheel Offset (ET):ET27.5 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x108
2021-2026 FITMENT SPECIFICATION

2022 Ford Bronco Sport

fitmentspec.com/ford/bronco-sport/2022
FINAL TORQUE150 ft-lbs(204 Nm)
Bolt Pattern (PCD)5x108
Center Bore63.4 mm
Fastener & ThreadM14 x 1.5Lug Nut • Conical 60 Degree
TPMS CalibrationDirect Tire Pressure MonitoringDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x108 bolt pattern and 63.4 mm hub bore.

✓ No Centering Rings Required
2019-202463.4 mm CB
Ford Edge
Torque: 150 ft-lbsSpecs →
2020-202663.4 mm CB
Ford Escape
Torque: 150 ft-lbsSpecs →
2016-201863.4 mm CB
Ford Focus RS
Torque: 150 ft-lbsSpecs →
2013-202063.4 mm CB
Ford Fusion
Torque: 150 ft-lbsSpecs →
2022-202663.4 mm CB
Ford Maverick
Torque: 150 ft-lbsSpecs →
2022-202663.4 mm CB
Ford Maverick
Torque: 150 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +4.19" (+14.70%)
+14.70%
Original Baseline Tire225/65R17
New Target Tire285/70R17
QUICK SIZES:
28.5"32.7"
Speedometer Variance Table
30 mph gauge34.4 actual+4.4 mph
45 mph gauge51.6 actual+6.6 mph
60 mph gauge68.8 actual+8.8 mph
70 mph gauge80.3 actual+10.3 mph
80 mph gauge91.8 actual+11.8 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
215/70R16
Mounted on 16x6.5" Wheel
PCD: 5x108
Center Bore: 63.4 mm
🛡️ Technical Benefits for 2022 Ford Bronco Sport
⛷️ Higher Ground Pressure
A narrower tire (215mm vs 225mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+5% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TIRE PRESSURE MONITORING TPMS315 MHz
Architecture
Indirect Wheel Speed ABS
Sensor Part Number
F2GZ-1A189-A
Relearn Protocol
Drive Relearn
Relearn Sequence0 / 1 Steps Complete
1
Inflate tires to 33 PSI cold. Drive over 20 mph for 15 minutes for automatic receiver calibration.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2022 Bronco Sport

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2022 Ford Bronco Sport)

8 Verified Q&As
Q What is the bolt pattern for a 2022 Ford Bronco Sport?
The factory bolt pattern (PCD) for the 2022 Ford Bronco Sport is 5x108 (5-lug configuration) with a pitch circle diameter of 108 mm. Center bore hub diameter is 63.4 mm.
Q What is the wheel lug torque specification for a 2022 Ford Bronco Sport?
The official factory wheel lug torque specification for the 2022 Ford Bronco Sport is 150 ft-lbs (204 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2022 Ford Bronco Sport?
The official maximum braked towing capacity for the 2022 Ford Bronco Sport is 2,200 lbs (998 kg) with a maximum tongue weight limit of 220 lbs. Recommended hitch receiver: Class II (Class II Trailer Tow Package). Unbraked trailer limit is 770 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2022 Ford Bronco Sport?
Factory stock tire sizing for the 2022 Ford Bronco Sport is 225/65R17 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2022 Ford Bronco Sport and are hub centric rings needed?
The center bore diameter is exactly 63.4 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 63.4mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2022 Ford Bronco Sport use?
The 2022 Ford Bronco Sport utilizes M14 x 1.5 Lug Nuts with a Conical 60 Degree seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2022 Ford Bronco Sport have Direct or Indirect TPMS and how is it reset?
This vehicle utilizes standard valve stems without requiring active electronic TPMS sensor recalibration.
Q What aftermarket wheel offset and tire sizes fit a 2022 Ford Bronco Sport without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +35mm and +45mm with a flush target of ET +35. Always test clearance at full steering lock.