FitmentSpec Logo
Ford logo
5th Gen P708 (XL / XLT / Lariat / Tremor 6.7L Power Stroke V8 Diesel) (2023–2026)

2023 Ford F-250 Super Duty

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2023 Ford F-250 Super Duty
OEM Powertrain Standard Specification
Chassis Dimensions Exterior & Curb Weight
Bolt Pattern8-Lug
8x170
Center BoreHub Centric
124.9 mm
Hub Ring Spigot Diameter
Offset RangeET
+35 to +45
Flush Target: ET +40
Lug TorqueM14 x 1.5
165 ft-lbs
224 Nm • Flange Seat
Fastener: Flange Seat with Flat Captive Washer Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2023 Ford F-250 Super Duty Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 22,000 lbs
Max Towing (Braked)
22,000 lbs
9,979 kg
With factory trailer brakes
Max Payload Capacity
4,260 lbs
1,932 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
2,200 lbs
998 kg
Maximum hitch downward load
Hitch Receiver Class
Class V (2.5-inch / 3-inch Heavy Duty Receiver)
Weight distribution rated
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2023 F-250 Super Duty
Selected Load: 22,000 lbs • Vehicle Rating: 22,000 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Capable of up to 22,000 lbs conventional bumper pull and up to 37,000 lbs gooseneck/5th-wheel with 6.7L High Output Power Stroke Diesel.

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 1500 lbs (680 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2023 Ford F-250 Super Duty Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2023 Ford F-250 Super Duty? The factory bolt pattern is 8x170 (8-lug) with a 124.9 mm center bore. The manufacturer specified wheel lug torque is 165 ft-lbs (224 Nm) using M14 x 1.5 Lug Nuts with a Flange Seat with Flat Captive Washer seating surface. Safe wheel offset range is +35mm to +45mm.

Factory OEM Wheel & Tire Configurations (2023)

1 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
Tremor Off-Road (18" Machined-Finish Aluminum with 35" Goodyear DuraTrac) 18x8 ET+40
LT285/75R18 Compare ⚡
32-35 PSI Placard Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Ford F-250 Super Duty factory 124.9 mm hub snout.

Factory Hub: 124.9mm
Hub Diagnostic Result
🚨 INCOMPATIBLE WHEEL BORE (TOO SMALL)

The wheel bore (73.1 mm) is smaller than the car hub (124.9 mm). The wheel will NOT physically seat flush on the hub face without wheel spacers or center-bore machining.

💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 8" ET40
New Wheel Width:9.0" (+1.0" vs OEM)
New Wheel Offset (ET):ET30 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

8x170
2023-2026 FITMENT SPECIFICATION

2023 Ford F-250 Super Duty

fitmentspec.com/ford/f-250-super-duty/2023
FINAL TORQUE165 ft-lbs(224 Nm)
Bolt Pattern (PCD)8x170
Center Bore124.9 mm
Fastener & ThreadM14 x 1.5Lug Nut • Flange Seat with Flat Captive Washer
TPMS CalibrationDirectDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 8x170 bolt pattern and 124.9 mm hub bore.

✓ No Centering Rings Required
2020-2026124.9 mm CB
Ford F-350 Super Duty
Torque: 165 ft-lbsSpecs →
🔄

Cross-Vehicle OEM Wheel Swap Compatibility (8x170)

Verified OEM donor vehicles whose factory wheels fit the Ford F-250 Super Duty hub (124.9mm).

Wheel Swap Calculator →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: -2.12" (-6.09%)
-6.09%
Original Baseline Tire285/75R18
New Target Tire285/70R17
QUICK SIZES:
34.8"32.7"
Speedometer Variance Table
30 mph gauge28.2 actual-1.8 mph
45 mph gauge42.3 actual-2.7 mph
60 mph gauge56.3 actual-3.7 mph
70 mph gauge65.7 actual-4.3 mph
80 mph gauge75.1 actual-4.9 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
275/80R17
Mounted on 17x7.0" Wheel
PCD: 8x170
Center Bore: 124.9 mm
🛡️ Technical Benefits for 2023 Ford F-250 Super Duty
⛷️ Higher Ground Pressure
A narrower tire (275mm vs 285mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+5% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TPMS433 MHz
Architecture
Direct Valve Stem Transducer
Sensor Part Number
N/A (ABS Sensor)
Relearn Protocol
Auto-Relearn Drive Cycle
Relearn Sequence0 / 1 Steps Complete
1
Drive vehicle above 15 mph (25 km/h) for up to 20 minutes to automatically synchronize sensor IDs.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2023 F-250 Super Duty

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2023 Ford F-250 Super Duty)

8 Verified Q&As
Q What is the bolt pattern for a 2023 Ford F-250 Super Duty?
The factory bolt pattern (PCD) for the 2023 Ford F-250 Super Duty is 8x170 (8-lug configuration) with a pitch circle diameter of 170 mm. Center bore hub diameter is 124.9 mm.
Q What is the wheel lug torque specification for a 2023 Ford F-250 Super Duty?
The official factory wheel lug torque specification for the 2023 Ford F-250 Super Duty is 165 ft-lbs (224 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2023 Ford F-250 Super Duty?
The official maximum braked towing capacity for the 2023 Ford F-250 Super Duty is 22,000 lbs (9,979 kg) with a maximum tongue weight limit of 2,200 lbs. Recommended hitch receiver: Class V (2.5-inch / 3-inch Heavy Duty Receiver). Unbraked trailer limit is 1,500 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2023 Ford F-250 Super Duty?
Factory stock tire sizing for the 2023 Ford F-250 Super Duty is LT285/75R18 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2023 Ford F-250 Super Duty and are hub centric rings needed?
The center bore diameter is exactly 124.9 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 124.9mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2023 Ford F-250 Super Duty use?
The 2023 Ford F-250 Super Duty utilizes M14 x 1.5 Lug Nuts with a Flange Seat with Flat Captive Washer seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2023 Ford F-250 Super Duty have Direct or Indirect TPMS and how is it reset?
It features a Direct TPMS system utilizing physical valve-stem pressure sensors operating at 433 MHz. The relearn protocol is Auto-Relearn Drive Cycle: Drive vehicle above 15 mph (25 km/h) for up to 20 minutes to automatically synchronize sensor IDs.
Q What aftermarket wheel offset and tire sizes fit a 2023 Ford F-250 Super Duty without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +35mm and +45mm with a flush target of ET +40. Always test clearance at full steering lock.