2025 Ford F-350 Super Duty
Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.
2025 Ford F-350 Super Duty Towing Capacity & Hitch Telemetry
Official manufacturer braked tow ratings, max tongue weight, and payload limits.
Light duty towing up to 1,000 lbs. Recommended primarily for hitch-mounted accessories (bike racks, ski racks, cargo baskets).
- • Unbraked trailer maximum limit: 350 lbs (159 kg).
- • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
- • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.
2025 Ford F-350 Super Duty Quick Fitment Answers
Looking for exact hub and wheel specifications for the 2025 Ford F-350 Super Duty? The factory bolt pattern is 8x170 (8-lug) with a 124.9 mm center bore. The manufacturer specified wheel lug torque is 165 ft-lbs (224 Nm) using M14 x 1.5 Lug Nuts with a Flanged Flat Seat with Captive Washer seating surface. Safe wheel offset range is +35mm to +45mm.
Factory OEM Wheel & Tire Configurations (2025)
1 TRIM OPTIONS| Trim Name | Wheel Size | Tire Specification | Placard PSI | Equipment |
|---|---|---|---|---|
| Platinum / Tremor (18" Machined-Finish Aluminum with Dark Pockets) | 18x8 ET+40 | LT285/75R18 (35" Goodyear DuraTrac)
Compare ⚡
| 60 PSI | Find Tires → |
Hub Centric Ring Finder & Vibration Eliminator
Precision adapter sizing for Ford F-350 Super Duty factory 124.9 mm hub snout.
The wheel bore (73.1 mm) is smaller than the car hub (124.9 mm). The wheel will NOT physically seat flush on the hub face without wheel spacers or center-bore machining.
OEM vs. Aftermarket Visual Stance & Poke Gauge
Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.
Printable Mechanic Spec Card & Torque Sequence
High-contrast pocket card for tire shops, track days, and garage toolboxes.
2025 Ford F-350 Super Duty
fitmentspec.com/ford/f-350-super-duty/2025DIRECT HUB-CENTRIC WHEEL INTERCHANGE
Vehicles sharing both the exact 8x170 bolt pattern and 124.9 mm hub bore.
Cross-Vehicle OEM Wheel Swap Compatibility (8x170)
Verified OEM donor vehicles whose factory wheels fit the Ford F-350 Super Duty hub (124.9mm).
⚡ Will It Rub? 2D Offset & Strut Clearance
Real-time inner strut clearance and outer fender poke calculation.
WINTER WHEEL & MINUS-SIZING ADVISOR
Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.
📡 TPMS Protocol & Relearn Procedure
US OEM Sensor Protocol & Step-by-Step Calibration