2019 Ford Fiesta
Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.
2019 Ford Fiesta Towing Capacity & Hitch Telemetry
Official manufacturer braked tow ratings, max tongue weight, and payload limits.
Recommended primarily for hitch-mounted lightweight bike racks and ultralight micro utility trailers.
- • Unbraked trailer maximum limit: 600 lbs (272 kg).
- • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
- • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.
2019 Ford Fiesta Quick Fitment Answers
Looking for exact hub and wheel specifications for the 2019 Ford Fiesta? The factory bolt pattern is 4x108 (4-lug) with a 63.4 mm center bore. The manufacturer specified wheel lug torque is 85 ft-lbs (115 Nm) using M12x1.5 Lug Nuts with a Conical 60 Degree seating surface. Safe wheel offset range is +40mm to +50mm.
Factory OEM Wheel & Tire Configurations (2019)
3 TRIM OPTIONS| Trim Name | Wheel Size | Tire Specification | Placard PSI | Equipment |
|---|---|---|---|---|
| 15" S / SE / Zetec Alloy & Steel | 15x6 ET+47.5 | 185/60R15
Compare ⚡
| 31 / 26 PSI | Find Tires → |
| 16" Titanium / Trend Alloy | 16x6.5 ET+47.5 | 195/45R16
Compare ⚡
| 32 / 28 PSI | Find Tires → |
| 17" ST-Line / Sport Alloy | 17x7 ET+47.5 | 205/40R17
Compare ⚡
| 33 / 29 PSI | Find Tires → |
🔧 Technical Service Bulletins (TSB) & Suspension Chronic Issues
2 DOCUMENTED ISSUESSwollen outer chrome shell on 19mm lug nuts preventing socket removal during roadside puncture repair
Moisture penetration between thin stainless steel stamped cap and interior carbon steel nut
Spring binding and pinging/popping noise when turning steering wheel lock-to-lock
Dirt and grit contamination inside unsealed upper strut mount thrust bearings
Hub Centric Ring Finder & Vibration Eliminator
Precision adapter sizing for Ford Fiesta factory 63.4 mm hub snout.
The wheel bore is +9.7 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:
OEM vs. Aftermarket Visual Stance & Poke Gauge
Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.
Printable Mechanic Spec Card & Torque Sequence
High-contrast pocket card for tire shops, track days, and garage toolboxes.
2019 Ford Fiesta
fitmentspec.com/ford/fiesta/2019⚡ Will It Rub? 2D Offset & Strut Clearance
Real-time inner strut clearance and outer fender poke calculation.
WINTER WHEEL & MINUS-SIZING ADVISOR
Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.
📡 TPMS Protocol & Relearn Procedure
US OEM Sensor Protocol & Step-by-Step Calibration
🔍 Pre-Purchase Fitment & Chassis Inspection Checklist
Universal 8-Point Buyer Guide →✓ Wheel Hub & Bearing Inspection
- • Check 4x108mm stud threads and 63.4mm hub spigot for corrosion; torque to exactly 85 ft-lbs (115 Nm).
- • Inspect all 16 lug nuts; replace any swollen capped nuts with solid 1-piece acorn nuts.
✓ Suspension & Steering Clearance
- • Inspect rear twist-beam axle pivot bushings for dry cracking or rubber separation.
- • Check front strut body clearance when fitting aftermarket 7.5J width wheels.
Fiesta 258mm front discs and rear drum/disc setups clear all standard 15-inch, 16-inch, and 17-inch OEM 4x108 wheels.
📋 One-Click Forum Spec Exporter
Export verified specs for enthusiast forums (vBulletin, XenForo, Reddit).
Verified Hardware & Installation Kit for 2019 Fiesta
Frequently Asked Questions (2019 Ford Fiesta)
Q What is the bolt pattern for a 2019 Ford Fiesta?
Q What is the wheel lug torque specification for a 2019 Ford Fiesta?
Q What is the towing capacity of a 2019 Ford Fiesta?
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2019 Ford Fiesta?
Q What is the center bore size on a 2019 Ford Fiesta and are hub centric rings needed?
Q What size lug nuts and thread pitch does a 2019 Ford Fiesta use?
Q Does the 2019 Ford Fiesta have Direct or Indirect TPMS and how is it reset?
Q What aftermarket wheel offset and tire sizes fit a 2019 Ford Fiesta without rubbing?
⚠️ Official NHTSA Safety Recalls & Bulletins
Lack of coolant circulation causes cylinder head to overheat, leading to cylinder head cracking and oil leak.