FitmentSpec Logo
Ford logo
2nd Gen (CD4 Platform) (2013–2020)

2014 Ford Fusion

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2014 Ford Fusion
Factory Powertrain 2.7L EcoBoost Twin-Turbo V6 (Sport 325 HP) / 2.0L EcoBoost / 2.5L I4
325 HP (242 kW) 380 lb-ft 2.7L V6 Twin-Turbo / Inline-4
Chassis Dimensions Exterior & Curb Weight
L: 191.7" W: 72.9" WB: 112.2" 3,431 - 3,980 lbs lbs
Bolt Pattern5-Lug
5x108
Center BoreHub Centric
63.4 mm
Hub Ring Spigot Diameter
Offset RangeET
+40 to +55
Flush Target: ET +42
Lug TorqueM12 x 1.5
100 ft-lbs
135 Nm • Conical Seat
Fastener: Conical 60 Degree Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2014 Ford Fusion Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 1,000 lbs
Max Towing (Braked)
1,000 lbs
454 kg
With factory trailer brakes
Max Payload Capacity
850 lbs
386 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
100 lbs
45 kg
Maximum hitch downward load
Hitch Receiver Class
Class I (1.25-inch Receiver)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2014 Fusion
Selected Load: 1,000 lbs • Vehicle Rating: 1,000 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Light duty towing up to 1,000 lbs. Recommended primarily for hitch-mounted accessories (bike racks, ski racks, cargo baskets).

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 350 lbs (159 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2014 Ford Fusion Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2014 Ford Fusion? The factory bolt pattern is 5x108 (5-lug) with a 63.4 mm center bore. The manufacturer specified wheel lug torque is 100 ft-lbs (135 Nm) using M12 x 1.5 Lug Nuts with a Conical 60 Degree seating surface. Safe wheel offset range is +40mm to +55mm.

Factory OEM Wheel & Tire Configurations (2014)

2 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
SE / Titanium (17"-18") 18x8 ET+55
235/45R18 Compare ⚡
33 PSI Find Tires →
Sport / Titanium (19" Tarnished Dark) 19x8 ET+55
235/40R19 Compare ⚡
35 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Ford Fusion factory 63.4 mm hub snout.

Factory Hub: 63.4mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +9.7 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 63.4mm (OD: 73.1mm / ID: 63.4mm)
🛒 Order 73.1mm to 63.4mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 8" ET55
New Wheel Width:9.0" (+1.0" vs OEM)
New Wheel Offset (ET):ET45 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x108
2013-2020 FITMENT SPECIFICATION

2014 Ford Fusion

fitmentspec.com/ford/fusion/2014
FINAL TORQUE100 ft-lbs(135 Nm)
Bolt Pattern (PCD)5x108
Center Bore63.4 mm
Fastener & ThreadM12 x 1.5Lug Nut • Conical 60 Degree
TPMS CalibrationDirect Tire Pressure Monitoring SensorDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x108 bolt pattern and 63.4 mm hub bore.

✓ No Centering Rings Required
2021-202663.4 mm CB
Ford Bronco Sport
Torque: 100 ft-lbsSpecs →
2019-202463.4 mm CB
Ford Edge
Torque: 100 ft-lbsSpecs →
2020-202663.4 mm CB
Ford Escape
Torque: 100 ft-lbsSpecs →
2016-201863.4 mm CB
Ford Focus RS
Torque: 100 ft-lbsSpecs →
2022-202663.4 mm CB
Ford Maverick
Torque: 100 ft-lbsSpecs →
2022-202663.4 mm CB
Ford Maverick
Torque: 100 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +6.38" (+24.24%)
+24.24%
Original Baseline Tire235/45R18
New Target Tire285/70R17
QUICK SIZES:
26.3"32.7"
Speedometer Variance Table
30 mph gauge37.3 actual+7.3 mph
45 mph gauge55.9 actual+10.9 mph
60 mph gauge74.5 actual+14.5 mph
70 mph gauge87.0 actual+17.0 mph
80 mph gauge99.4 actual+19.4 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
225/50R17
Mounted on 17x7.0" Wheel
PCD: 5x108
Center Bore: 63.4 mm
🛡️ Technical Benefits for 2014 Ford Fusion
⛷️ Higher Ground Pressure
A narrower tire (225mm vs 235mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+5% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TIRE PRESSURE MONITORING SENSOR TPMS315 MHz
Architecture
Indirect Wheel Speed ABS
Sensor Part Number
DE8T-1A180-AA
Relearn Protocol
Key Sequence / Tool
Relearn Sequence0 / 1 Steps Complete
1
Ensure cold pressures match placard (33-35 PSI). Cycle ignition 3 times ending in RUN, tap brake, cycle 3 times ending in RUN. Horn chirps. Trigger LF, RF, RR, LR sensors.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2014 Fusion

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2014 Ford Fusion)

8 Verified Q&As
Q What is the bolt pattern for a 2014 Ford Fusion?
The factory bolt pattern (PCD) for the 2014 Ford Fusion is 5x108 (5-lug configuration) with a pitch circle diameter of 108 mm. Center bore hub diameter is 63.4 mm.
Q What is the wheel lug torque specification for a 2014 Ford Fusion?
The official factory wheel lug torque specification for the 2014 Ford Fusion is 100 ft-lbs (135 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2014 Ford Fusion?
The official maximum braked towing capacity for the 2014 Ford Fusion is 1,000 lbs (454 kg) with a maximum tongue weight limit of 100 lbs. Recommended hitch receiver: Class I (1.25-inch Receiver). Unbraked trailer limit is 350 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2014 Ford Fusion?
Factory stock tire sizing for the 2014 Ford Fusion is 235/45R18 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2014 Ford Fusion and are hub centric rings needed?
The center bore diameter is exactly 63.4 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 63.4mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2014 Ford Fusion use?
The 2014 Ford Fusion utilizes M12 x 1.5 Lug Nuts with a Conical 60 Degree seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2014 Ford Fusion have Direct or Indirect TPMS and how is it reset?
This vehicle utilizes standard valve stems without requiring active electronic TPMS sensor recalibration.
Q What aftermarket wheel offset and tire sizes fit a 2014 Ford Fusion without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +40mm and +55mm with a flush target of ET +42. Always test clearance at full steering lock.