FitmentSpec Logo
GMC logo
5th Gen (T1XX) (2019–2026)

2024 GMC Sierra 1500

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2024 GMC Sierra 1500
Factory Powertrain 5.3L / 6.2L EcoTec3 V8 / 3.0L Duramax Turbo-Diesel
420 HP (313 kW) 460 lb-ft 6.2L V8 / Inline-6 Diesel
Chassis Dimensions Exterior & Curb Weight
L: 231.9" W: 81.2" WB: 147.4" 4,750 - 5,620 lbs lbs
Center BoreHub Centric
78.1 mm
Hub Ring Spigot Diameter
Offset RangeET
+12 to +30
Flush Target: ET +12
Lug TorqueM14 x 1.5
140 ft-lbs
190 Nm • Conical Seat
Fastener: Conical 60 Degree Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2024 GMC Sierra 1500 Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 13,200 lbs
Max Towing (Braked)
13,200 lbs
5,987 kg
With factory trailer brakes
Max Payload Capacity
2,270 lbs
1,030 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
1,320 lbs
599 kg
Maximum hitch downward load
Hitch Receiver Class
Class IV (2-inch Receiver)
Weight distribution rated
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2024 Sierra 1500
Selected Load: 13,200 lbs • Vehicle Rating: 13,200 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

13,200 lbs rating with Max Trailering Package, enhanced cooling radiator, 3.42 rear axle ratio, and 20-inch wheels.

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 1500 lbs (680 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2024 GMC Sierra 1500 Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2024 GMC Sierra 1500? The factory bolt pattern is 6x139.7 (6-lug) with a 78.1 mm center bore. The manufacturer specified wheel lug torque is 140 ft-lbs (190 Nm) using M14 x 1.5 Lug Nuts with a Conical 60 Degree seating surface. Safe wheel offset range is +12mm to +30mm.

Factory OEM Wheel & Tire Configurations (2024)

2 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
Pro / SLE / Elevation (18"-20") 20x9 ET+28
275/60R20 Compare ⚡
35 PSI Find Tires →
AT4 / AT4X / Denali Ultimate (18" AT / 22") 22x9 ET+28
275/50R22 Compare ⚡
35 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for GMC Sierra 1500 factory 78.1 mm hub snout.

Factory Hub: 78.1mm
Hub Diagnostic Result
🚨 INCOMPATIBLE WHEEL BORE (TOO SMALL)

The wheel bore (73.1 mm) is smaller than the car hub (78.1 mm). The wheel will NOT physically seat flush on the hub face without wheel spacers or center-bore machining.

💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 9" ET28
New Wheel Width:10.0" (+1.0" vs OEM)
New Wheel Offset (ET):ET18 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

6x139.7
2019-2026 FITMENT SPECIFICATION

2024 GMC Sierra 1500

fitmentspec.com/gmc/sierra-1500/2024
FINAL TORQUE140 ft-lbs(190 Nm)
Bolt Pattern (PCD)6x139.7
Center Bore78.1 mm
Fastener & ThreadM14 x 1.5Lug Nut • Conical 60 Degree
TPMS CalibrationDirect Tire Pressure Monitoring with Tire Fill AlertDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 6x139.7 bolt pattern and 78.1 mm hub bore.

✓ No Centering Rings Required
2021-202678.1 mm CB
Cadillac Escalade
Torque: 140 ft-lbsSpecs →
2023-202678.1 mm CB
Chevrolet Colorado
Torque: 140 ft-lbsSpecs →
2003-200678.1 mm CB
Chevrolet Silverado 1500
Torque: 140 ft-lbsSpecs →
2019-202678.1 mm CB
Chevrolet Silverado 1500
Torque: 140 ft-lbsSpecs →
2021-202678.1 mm CB
Chevrolet Suburban
Torque: 140 ft-lbsSpecs →
2021-202678.1 mm CB
Chevrolet Tahoe
Torque: 140 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Safe MatchDiameter: -0.28" (-0.86%)
-0.86%
Original Baseline Tire275/60R20
New Target Tire285/70R17
QUICK SIZES:
33.0"32.7"
Speedometer Variance Table
30 mph gauge29.7 actual-0.3 mph
45 mph gauge44.6 actual-0.4 mph
60 mph gauge59.5 actual-0.5 mph
70 mph gauge69.4 actual-0.6 mph
80 mph gauge79.3 actual-0.7 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
255/70R18
Mounted on 18x8.0" Wheel
PCD: 6x139.7
Center Bore: 78.1 mm
🛡️ Technical Benefits for 2024 GMC Sierra 1500
⛷️ Higher Ground Pressure
A narrower tire (255mm vs 275mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+10% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TIRE PRESSURE MONITORING WITH TIRE FILL ALERT TPMS433 MHz
Architecture
Indirect Wheel Speed ABS
Sensor Part Number
13598773
Relearn Protocol
Instrument Cluster / TPMS Activation Tool
Relearn Sequence0 / 1 Steps Complete
1
Enter TPMS Learn Mode via DIC. Trigger sensors in LF, RF, RR, LR sequence until horn chirps.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2024 Sierra 1500

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2024 GMC Sierra 1500)

8 Verified Q&As
Q What is the bolt pattern for a 2024 GMC Sierra 1500?
The factory bolt pattern (PCD) for the 2024 GMC Sierra 1500 is 6x139.7 (6-lug configuration) with a pitch circle diameter of 139.7 mm. Center bore hub diameter is 78.1 mm.
Q What is the wheel lug torque specification for a 2024 GMC Sierra 1500?
The official factory wheel lug torque specification for the 2024 GMC Sierra 1500 is 140 ft-lbs (190 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2024 GMC Sierra 1500?
The official maximum braked towing capacity for the 2024 GMC Sierra 1500 is 13,200 lbs (5,987 kg) with a maximum tongue weight limit of 1,320 lbs. Recommended hitch receiver: Class IV (2-inch Receiver). Unbraked trailer limit is 1,500 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2024 GMC Sierra 1500?
Factory stock tire sizing for the 2024 GMC Sierra 1500 is 275/60R20 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2024 GMC Sierra 1500 and are hub centric rings needed?
The center bore diameter is exactly 78.1 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 78.1mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2024 GMC Sierra 1500 use?
The 2024 GMC Sierra 1500 utilizes M14 x 1.5 Lug Nuts with a Conical 60 Degree seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2024 GMC Sierra 1500 have Direct or Indirect TPMS and how is it reset?
This vehicle utilizes standard valve stems without requiring active electronic TPMS sensor recalibration.
Q What aftermarket wheel offset and tire sizes fit a 2024 GMC Sierra 1500 without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +12mm and +30mm with a flush target of ET +12. Always test clearance at full steering lock.