FitmentSpec Logo
GMC logo
2nd Gen Facelift (2022–2024)

2024 GMC Terrain

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2024 GMC Terrain
Factory Powertrain 1.5L Turbo DOHC 4-Cylinder
175 HP (130 kW) 203 lb-ft 1.5L Inline-4 Turbo
Chassis Dimensions Exterior & Curb Weight
L: 182.3" W: 72.4" WB: 107.3" 3,449 - 3,659 lbs lbs
Bolt Pattern5-Lug
5x115
Center BoreHub Centric
70.3 mm
Hub Ring Spigot Diameter
Offset RangeET
+38 to +48
Flush Target: ET +38
Lug TorqueM12 x 1.5
100 ft-lbs
140 Nm • Conical Seat
Fastener: Conical 60 Degree Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2024 GMC Terrain Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 1,000 lbs
Max Towing (Braked)
1,000 lbs
454 kg
With factory trailer brakes
Max Payload Capacity
850 lbs
386 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
100 lbs
45 kg
Maximum hitch downward load
Hitch Receiver Class
Class I (1.25-inch Receiver)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2024 Terrain
Selected Load: 1,000 lbs • Vehicle Rating: 1,000 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Light duty towing up to 1,000 lbs. Recommended primarily for hitch-mounted accessories (bike racks, ski racks, cargo baskets).

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 350 lbs (159 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2024 GMC Terrain Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2024 GMC Terrain? The factory bolt pattern is 5x115 (5-lug) with a 70.3 mm center bore. The manufacturer specified wheel lug torque is 100 ft-lbs (140 Nm) using M12 x 1.5 Lug Nuts with a Conical 60 Degree seating surface. Safe wheel offset range is +38mm to +48mm.

Factory OEM Wheel & Tire Configurations (2024)

2 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
SLE / SLT / AT4 (17" Gloss Black AT) 17x7 ET+41
225/65R17 (Goodyear Sport Terrain AT) Compare ⚡
35 PSI Find Tires →
Denali (19" Ultra-Bright Machined) 19x7.5 ET+46
235/50R19 Compare ⚡
35 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for GMC Terrain factory 70.3 mm hub snout.

Factory Hub: 70.3mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +2.8 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 70.3mm (OD: 73.1mm / ID: 70.3mm)
🛒 Order 73.1mm to 70.3mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 7" ET41
New Wheel Width:8.0" (+1.0" vs OEM)
New Wheel Offset (ET):ET31 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x115
2022-2024 FITMENT SPECIFICATION

2024 GMC Terrain

fitmentspec.com/gmc/terrain/2024
FINAL TORQUE100 ft-lbs(140 Nm)
Bolt Pattern (PCD)5x115
Center Bore70.3 mm
Fastener & ThreadM12 x 1.5Lug Nut • Conical 60 Degree
TPMS CalibrationDirect Tire Pressure SensorDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x115 bolt pattern and 70.3 mm hub bore.

✓ No Centering Rings Required
2020-202670.3 mm CB
Buick Encore GX
Torque: 100 ft-lbsSpecs →
2020-202670.3 mm CB
Cadillac CT4
Torque: 100 ft-lbsSpecs →
2025-202670.3 mm CB
Chevrolet Equinox
Torque: 100 ft-lbsSpecs →
2016-202470.3 mm CB
Chevrolet Malibu
Torque: 100 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +4.19" (+14.70%)
+14.70%
Original Baseline Tire225/65R17
New Target Tire285/70R17
QUICK SIZES:
28.5"32.7"
Speedometer Variance Table
30 mph gauge34.4 actual+4.4 mph
45 mph gauge51.6 actual+6.6 mph
60 mph gauge68.8 actual+8.8 mph
70 mph gauge80.3 actual+10.3 mph
80 mph gauge91.8 actual+11.8 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
215/70R16
Mounted on 16x6.5" Wheel
PCD: 5x115
Center Bore: 70.3 mm
🛡️ Technical Benefits for 2024 GMC Terrain
⛷️ Higher Ground Pressure
A narrower tire (215mm vs 225mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+5% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TIRE PRESSURE SENSOR TPMS433 MHz
Architecture
Indirect Wheel Speed ABS
Sensor Part Number
13598773
Relearn Protocol
Drive Relearn
Relearn Sequence0 / 1 Steps Complete
1
Ensure 35 PSI cold. Drive over 20 mph for 10-15 minutes.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2024 Terrain

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2024 GMC Terrain)

8 Verified Q&As
Q What is the bolt pattern for a 2024 GMC Terrain?
The factory bolt pattern (PCD) for the 2024 GMC Terrain is 5x115 (5-lug configuration) with a pitch circle diameter of 115 mm. Center bore hub diameter is 70.3 mm.
Q What is the wheel lug torque specification for a 2024 GMC Terrain?
The official factory wheel lug torque specification for the 2024 GMC Terrain is 100 ft-lbs (140 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2024 GMC Terrain?
The official maximum braked towing capacity for the 2024 GMC Terrain is 1,000 lbs (454 kg) with a maximum tongue weight limit of 100 lbs. Recommended hitch receiver: Class I (1.25-inch Receiver). Unbraked trailer limit is 350 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2024 GMC Terrain?
Factory stock tire sizing for the 2024 GMC Terrain is 225/65R17 (Goodyear Sport Terrain AT) with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2024 GMC Terrain and are hub centric rings needed?
The center bore diameter is exactly 70.3 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 70.3mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2024 GMC Terrain use?
The 2024 GMC Terrain utilizes M12 x 1.5 Lug Nuts with a Conical 60 Degree seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2024 GMC Terrain have Direct or Indirect TPMS and how is it reset?
This vehicle utilizes standard valve stems without requiring active electronic TPMS sensor recalibration.
Q What aftermarket wheel offset and tire sizes fit a 2024 GMC Terrain without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +38mm and +48mm with a flush target of ET +38. Always test clearance at full steering lock.