FitmentSpec Logo
Honda logo
YK (2nd Gen Facelift) (2021–2026)

2026 Honda Ridgeline

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2026 Honda Ridgeline
Factory Powertrain 3.5L 24-Valve SOHC Direct-Injected i-VTEC V6
280 HP (209 kW) 262 lb-ft 3.5L V6
Chassis Dimensions Exterior & Curb Weight
L: 210.2" W: 78.6" WB: 125.2" 4,436 - 4,510 lbs lbs
Bolt Pattern5-Lug
5x120
Center BoreHub Centric
64.1 mm
Hub Ring Spigot Diameter
Offset RangeET
+35 to +55
Flush Target: ET +35
Lug TorqueM14 x 1.5
94 ft-lbs
127 Nm • Ball Seat
Fastener: Ball Seat R14 Radius Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2026 Honda Ridgeline Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 5,000 lbs
Max Towing (Braked)
5,000 lbs
2,268 kg
With factory trailer brakes
Max Payload Capacity
1,583 lbs
718 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
500 lbs
227 kg
Maximum hitch downward load
Hitch Receiver Class
Class III (Factory Integrated Receiver)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2026 Ridgeline
Selected Load: 5,000 lbs • Vehicle Rating: 5,000 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Standard 5,000 lbs towing across all AWD trims with 3.5L V6, standard high-capacity radiator with dual fans, and transmission fluid cooler.

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 1500 lbs (680 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2026 Honda Ridgeline Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2026 Honda Ridgeline? The factory bolt pattern is 5x120 (5-lug) with a 64.1 mm center bore. The manufacturer specified wheel lug torque is 94 ft-lbs (127 Nm) using M14 x 1.5 Lug Nuts with a Ball Seat R14 Radius seating surface. Safe wheel offset range is +35mm to +55mm.

Factory OEM Wheel & Tire Configurations (2026)

2 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
Sport / RTL / Black Edition (18" Pewter/Black) 18x8 ET+55
245/60R18 Compare ⚡
35 PSI Find Tires →
TrailSport (18" Pewter Gray All-Terrain) 18x8 ET+55
245/60R18 (General Grabber A/Tx) Compare ⚡
35 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Honda Ridgeline factory 64.1 mm hub snout.

Factory Hub: 64.1mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +9.0 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 64.1mm (OD: 73.1mm / ID: 64.1mm)
🛒 Order 73.1mm to 64.1mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 8" ET55
New Wheel Width:9.0" (+1.0" vs OEM)
New Wheel Offset (ET):ET45 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x120
2021-2026 FITMENT SPECIFICATION

2026 Honda Ridgeline

fitmentspec.com/honda/ridgeline/2026
FINAL TORQUE94 ft-lbs(127 Nm)
Bolt Pattern (PCD)5x120
Center Bore64.1 mm
Fastener & ThreadM14 x 1.5Lug Nut • Ball Seat R14 Radius
TPMS CalibrationDirect Tire Pressure Sensor with Tire Fill AssistDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x120 bolt pattern and 64.1 mm hub bore.

✓ No Centering Rings Required
2024-202664.1 mm CB
Acura Integra Type S
Torque: 94 ft-lbsSpecs →
2022-202664.1 mm CB
Acura MDX
Torque: 94 ft-lbsSpecs →
2017-202264.1 mm CB
Acura NSX
Torque: 94 ft-lbsSpecs →
2014-202064.1 mm CB
Acura RLX
Torque: 94 ft-lbsSpecs →
2004-201464.1 mm CB
Acura TL
Torque: 94 ft-lbsSpecs →
2021-202664.1 mm CB
Acura TLX
Torque: 94 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +3.13" (+10.60%)
+10.60%
Original Baseline Tire245/60R18
New Target Tire285/70R17
QUICK SIZES:
29.6"32.7"
Speedometer Variance Table
30 mph gauge33.2 actual+3.2 mph
45 mph gauge49.8 actual+4.8 mph
60 mph gauge66.4 actual+6.4 mph
70 mph gauge77.4 actual+7.4 mph
80 mph gauge88.5 actual+8.5 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
235/65R17
Mounted on 17x7.0" Wheel
PCD: 5x120
Center Bore: 64.1 mm
🛡️ Technical Benefits for 2026 Honda Ridgeline
⛷️ Higher Ground Pressure
A narrower tire (235mm vs 245mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+5% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TIRE PRESSURE SENSOR WITH TIRE FILL ASSIST TPMS433 MHz
Architecture
Indirect Wheel Speed ABS
Sensor Part Number
42753-T6N-A01
Relearn Protocol
Drive Relearn
Relearn Sequence0 / 1 Steps Complete
1
Adjust tires to 35 PSI. Drive vehicle over 28 mph for 5 to 10 minutes until sensor icons update.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2026 Ridgeline

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2026 Honda Ridgeline)

8 Verified Q&As
Q What is the bolt pattern for a 2026 Honda Ridgeline?
The factory bolt pattern (PCD) for the 2026 Honda Ridgeline is 5x120 (5-lug configuration) with a pitch circle diameter of 120 mm. Center bore hub diameter is 64.1 mm.
Q What is the wheel lug torque specification for a 2026 Honda Ridgeline?
The official factory wheel lug torque specification for the 2026 Honda Ridgeline is 94 ft-lbs (127 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2026 Honda Ridgeline?
The official maximum braked towing capacity for the 2026 Honda Ridgeline is 5,000 lbs (2,268 kg) with a maximum tongue weight limit of 500 lbs. Recommended hitch receiver: Class III (Factory Integrated Receiver). Unbraked trailer limit is 1,500 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2026 Honda Ridgeline?
Factory stock tire sizing for the 2026 Honda Ridgeline is 245/60R18 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2026 Honda Ridgeline and are hub centric rings needed?
The center bore diameter is exactly 64.1 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 64.1mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2026 Honda Ridgeline use?
The 2026 Honda Ridgeline utilizes M14 x 1.5 Lug Nuts with a Ball Seat R14 Radius seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2026 Honda Ridgeline have Direct or Indirect TPMS and how is it reset?
This vehicle utilizes standard valve stems without requiring active electronic TPMS sensor recalibration.
Q What aftermarket wheel offset and tire sizes fit a 2026 Honda Ridgeline without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +35mm and +55mm with a flush target of ET +35. Always test clearance at full steering lock.