FitmentSpec Logo
Jeep logo
BU (1st Gen) (2018–2023)

2022 Jeep Renegade

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2022 Jeep Renegade
Factory Powertrain 1.3L MultiAir Turbo 4-Cylinder
177 HP (132 kW) 210 lb-ft 1.3L Inline-4 Turbo
Chassis Dimensions Exterior & Curb Weight
L: 166.6" W: 74.2" WB: 101.2" 3,359 - 3,532 lbs lbs
Bolt Pattern5-Lug
5x110
Center BoreHub Centric
65.1 mm
Hub Ring Spigot Diameter
Offset RangeET
+35 to +45
Flush Target: ET +38
Lug TorqueM12 x 1.25
89 ft-lbs
120 Nm • Conical Seat
Fastener: Conical 60 Degree Lug Bolt. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2022 Jeep Renegade Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 1,500 lbs
Max Towing (Braked)
1,500 lbs
680 kg
With factory trailer brakes
Max Payload Capacity
1,050 lbs
476 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
150 lbs
68 kg
Maximum hitch downward load
Hitch Receiver Class
Class II (1.25 or 2-inch Receiver)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2022 Renegade
Selected Load: 1,500 lbs • Vehicle Rating: 1,500 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Standard 1,500 lbs towing capacity on base engines; selected adventure/turbo trims pull up to 3,000 – 3,500 lbs.

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 525 lbs (238 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2022 Jeep Renegade Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2022 Jeep Renegade? The factory bolt pattern is 5x110 (5-lug) with a 65.1 mm center bore. The manufacturer specified wheel lug torque is 89 ft-lbs (120 Nm) using M12 x 1.25 Lug Bolts with a Conical 60 Degree seating surface. Safe wheel offset range is +35mm to +45mm.

Factory OEM Wheel & Tire Configurations (2022)

2 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
Sport / Latitude (16"-17") 17x7 ET+40
215/60R17 Compare ⚡
35 PSI Find Tires →
Trailhawk (17" Semi-Gloss Black All-Terrain) 17x6.5 ET+40
215/65R17 (Falken Wildpeak A/T) Compare ⚡
35 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Jeep Renegade factory 65.1 mm hub snout.

Factory Hub: 65.1mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +8.0 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 65.1mm (OD: 73.1mm / ID: 65.1mm)
🛒 Order 73.1mm to 65.1mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 7" ET40
New Wheel Width:8.0" (+1.0" vs OEM)
New Wheel Offset (ET):ET30 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x110
2018-2023 FITMENT SPECIFICATION

2022 Jeep Renegade

fitmentspec.com/jeep/renegade/2022
FINAL TORQUE89 ft-lbs(120 Nm)
Bolt Pattern (PCD)5x110
Center Bore65.1 mm
Fastener & ThreadM12 x 1.25Lug Bolt • Conical 60 Degree
TPMS CalibrationDirect Tire Pressure SensorDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x110 bolt pattern and 65.1 mm hub bore.

✓ No Centering Rings Required
2005-201165.1 mm CB
Alfa Romeo 159
Torque: 89 ft-lbsSpecs →
2005-201065.1 mm CB
Alfa Romeo Brera
Torque: 89 ft-lbsSpecs →
2017-202665.1 mm CB
Alfa Romeo Giulia
Torque: 89 ft-lbsSpecs →
2010-202065.1 mm CB
Alfa Romeo Giulietta
Torque: 89 ft-lbsSpecs →
2018-202665.1 mm CB
Alfa Romeo Stelvio
Torque: 89 ft-lbsSpecs →
2023-202665.1 mm CB
Alfa Romeo Tonale
Torque: 89 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +5.55" (+20.44%)
+20.44%
Original Baseline Tire215/60R17
New Target Tire285/70R17
QUICK SIZES:
27.2"32.7"
Speedometer Variance Table
30 mph gauge36.1 actual+6.1 mph
45 mph gauge54.2 actual+9.2 mph
60 mph gauge72.3 actual+12.3 mph
70 mph gauge84.3 actual+14.3 mph
80 mph gauge96.4 actual+16.4 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
205/65R16
Mounted on 16x6.5" Wheel
PCD: 5x110
Center Bore: 65.1 mm
🛡️ Technical Benefits for 2022 Jeep Renegade
⛷️ Higher Ground Pressure
A narrower tire (205mm vs 215mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+5% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TIRE PRESSURE SENSOR TPMS433 MHz
Architecture
Indirect Wheel Speed ABS
Sensor Part Number
68313387AB
Relearn Protocol
Drive Relearn
Relearn Sequence0 / 1 Steps Complete
1
Inflate tires to 35 PSI cold. Drive over 15 mph for 15-20 minutes.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2022 Renegade

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2022 Jeep Renegade)

8 Verified Q&As
Q What is the bolt pattern for a 2022 Jeep Renegade?
The factory bolt pattern (PCD) for the 2022 Jeep Renegade is 5x110 (5-lug configuration) with a pitch circle diameter of 110 mm. Center bore hub diameter is 65.1 mm.
Q What is the wheel lug torque specification for a 2022 Jeep Renegade?
The official factory wheel lug torque specification for the 2022 Jeep Renegade is 89 ft-lbs (120 Nm). Tighten all Lug Bolts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2022 Jeep Renegade?
The official maximum braked towing capacity for the 2022 Jeep Renegade is 1,500 lbs (680 kg) with a maximum tongue weight limit of 150 lbs. Recommended hitch receiver: Class II (1.25 or 2-inch Receiver). Unbraked trailer limit is 525 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2022 Jeep Renegade?
Factory stock tire sizing for the 2022 Jeep Renegade is 215/60R17 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2022 Jeep Renegade and are hub centric rings needed?
The center bore diameter is exactly 65.1 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 65.1mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2022 Jeep Renegade use?
The 2022 Jeep Renegade utilizes M12 x 1.25 Lug Bolts with a Conical 60 Degree seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2022 Jeep Renegade have Direct or Indirect TPMS and how is it reset?
This vehicle utilizes standard valve stems without requiring active electronic TPMS sensor recalibration.
Q What aftermarket wheel offset and tire sizes fit a 2022 Jeep Renegade without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +35mm and +45mm with a flush target of ET +38. Always test clearance at full steering lock.