FitmentSpec Logo
Kia logo
CV (1st Gen) (2022–2026)

2023 Kia EV6

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2023 Kia EV6
Factory Powertrain Dual Motor e-AWD (576 HP on GT)
576 HP (430 kW) 545 lb-ft 0 Dual-Motor EV
Chassis Dimensions Exterior & Curb Weight
L: 184.8" W: 74.4" WB: 114.2" 4,017 - 4,795 lbs lbs
Center BoreHub Centric
67.1 mm
Hub Ring Spigot Diameter
Offset RangeET
+40 to +55
Flush Target: ET +40
Lug TorqueM12 x 1.5
94 ft-lbs
127 Nm • Conical Seat
Fastener: Conical 60 Degree Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2023 Kia EV6 Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 2,300 lbs
Max Towing (Braked)
2,300 lbs
1,043 kg
With factory trailer brakes
Max Payload Capacity
970 lbs
440 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
230 lbs
104 kg
Maximum hitch downward load
Hitch Receiver Class
Class II (1.25 or 2-inch Receiver)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2023 EV6
Selected Load: 2,300 lbs • Vehicle Rating: 2,300 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

2,300 lbs (1,600 kg in Europe) with trailer brakes on Long Range AWD models with battery charge above 35%.

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 805 lbs (365 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2023 Kia EV6 Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2023 Kia EV6? The factory bolt pattern is 5x114.3 (5-lug) with a 67.1 mm center bore. The manufacturer specified wheel lug torque is 94 ft-lbs (127 Nm) using M12 x 1.5 Lug Nuts with a Conical 60 Degree seating surface. Safe wheel offset range is +40mm to +55mm.

Factory OEM Wheel & Tire Configurations (2023)

2 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
Wind / Light (19" Aero) 19x7.5 ET+49.5
235/55R19 Compare ⚡
36 PSI Find Tires →
GT-Line / GT (20"-21" Ultra-High Performance) 21x8.5 ET+43.5
255/40R21 (Goodyear Eagle F1 Asymmetric 3) Compare ⚡
36 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Kia EV6 factory 67.1 mm hub snout.

Factory Hub: 67.1mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +6.0 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 67.1mm (OD: 73.1mm / ID: 67.1mm)
🛒 Order 73.1mm to 67.1mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 7.5" ET49.5
New Wheel Width:8.5" (+1.0" vs OEM)
New Wheel Offset (ET):ET39.5 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x114.3
2022-2026 FITMENT SPECIFICATION

2023 Kia EV6

fitmentspec.com/kia/ev6/2023
FINAL TORQUE94 ft-lbs(127 Nm)
Bolt Pattern (PCD)5x114.3
Center Bore67.1 mm
Fastener & ThreadM12 x 1.5Lug Nut • Conical 60 Degree
TPMS CalibrationDirect Tire Pressure SensorDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x114.3 bolt pattern and 67.1 mm hub bore.

✓ No Centering Rings Required
2007-201067.1 mm CB
Alfa Romeo 8C Competizione
Torque: 94 ft-lbsSpecs →
2022-202667.1 mm CB
Ferrari 296 GTB
Torque: 94 ft-lbsSpecs →
2010-201567.1 mm CB
Ferrari 458 Italia
Torque: 94 ft-lbsSpecs →
2016-202067.1 mm CB
Ferrari 488 GTB
Torque: 94 ft-lbsSpecs →
2018-202467.1 mm CB
Ferrari 812 Superfast
Torque: 94 ft-lbsSpecs →
2009-201767.1 mm CB
Ferrari California
Torque: 94 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +3.53" (+12.10%)
+12.10%
Original Baseline Tire235/55R19
New Target Tire285/70R17
QUICK SIZES:
29.2"32.7"
Speedometer Variance Table
30 mph gauge33.6 actual+3.6 mph
45 mph gauge50.4 actual+5.4 mph
60 mph gauge67.3 actual+7.3 mph
70 mph gauge78.5 actual+8.5 mph
80 mph gauge89.7 actual+9.7 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
215/65R17
Mounted on 17x6.5" Wheel
PCD: 5x114.3
Center Bore: 67.1 mm
🛡️ Technical Benefits for 2023 Kia EV6
⛷️ Higher Ground Pressure
A narrower tire (215mm vs 235mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+10% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TIRE PRESSURE SENSOR TPMS433 MHz
Architecture
Indirect Wheel Speed ABS
Sensor Part Number
52933-C1100
Relearn Protocol
Automatic Drive Relearn
Relearn Sequence0 / 1 Steps Complete
1
Inflate all tires to placard (36 PSI cold). Drive at 20 mph or greater continuously for 10-15 minutes.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2023 EV6

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2023 Kia EV6)

8 Verified Q&As
Q What is the bolt pattern for a 2023 Kia EV6?
The factory bolt pattern (PCD) for the 2023 Kia EV6 is 5x114.3 (5-lug configuration) with a pitch circle diameter of 114.3 mm. Center bore hub diameter is 67.1 mm.
Q What is the wheel lug torque specification for a 2023 Kia EV6?
The official factory wheel lug torque specification for the 2023 Kia EV6 is 94 ft-lbs (127 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2023 Kia EV6?
The official maximum braked towing capacity for the 2023 Kia EV6 is 2,300 lbs (1,043 kg) with a maximum tongue weight limit of 230 lbs. Recommended hitch receiver: Class II (1.25 or 2-inch Receiver). Unbraked trailer limit is 805 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2023 Kia EV6?
Factory stock tire sizing for the 2023 Kia EV6 is 235/55R19 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2023 Kia EV6 and are hub centric rings needed?
The center bore diameter is exactly 67.1 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 67.1mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2023 Kia EV6 use?
The 2023 Kia EV6 utilizes M12 x 1.5 Lug Nuts with a Conical 60 Degree seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2023 Kia EV6 have Direct or Indirect TPMS and how is it reset?
This vehicle utilizes standard valve stems without requiring active electronic TPMS sensor recalibration.
Q What aftermarket wheel offset and tire sizes fit a 2023 Kia EV6 without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +40mm and +55mm with a flush target of ET +40. Always test clearance at full steering lock.