2024 Mazda CX-5
Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.
2024 Mazda CX-5 Towing Capacity & Hitch Telemetry
Official manufacturer braked tow ratings, max tongue weight, and payload limits.
Rated at 2,000 lbs across both naturally aspirated 2.5L and 2.5L Turbo engines with standard i-ACTIV AWD.
- • Unbraked trailer maximum limit: 700 lbs (318 kg).
- • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
- • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.
2024 Mazda CX-5 Quick Fitment Answers
Looking for exact hub and wheel specifications for the 2024 Mazda CX-5? The factory bolt pattern is 5x114.3 (5-lug) with a 67.1 mm center bore. The manufacturer specified wheel lug torque is 85 ft-lbs (115 Nm) using M12x1.5 Lug Nuts with a Conical 60° seating surface. Safe wheel offset range is +38mm to +50mm.
Factory OEM Wheel & Tire Configurations (2024)
2 TRIM OPTIONS| Trim Name | Wheel Size | Tire Specification | Placard PSI | Equipment |
|---|---|---|---|---|
| 2.5 S / Select | 17x7 ET+45 | 225/65R17
Compare ⚡
| 35 / 35 PSI | Find Tires → |
| Carbon Edition / Turbo | 19x7 ET+45 | 225/55R19
Compare ⚡
| 36 / 36 PSI | Find Tires → |
🔧 Technical Service Bulletins (TSB) & Suspension Chronic Issues
1 DOCUMENTED ISSUESCoolant odor, low coolant reservoir, or visible coolant seepage near exhaust manifold
Micro-cracks developing in the aluminum cylinder head casting near the turbo exhaust manifold stud boss (Mazda TSB 01-013/21)
Hub Centric Ring Finder & Vibration Eliminator
Precision adapter sizing for Mazda CX-5 factory 67.1 mm hub snout.
The wheel bore is +6.0 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:
OEM vs. Aftermarket Visual Stance & Poke Gauge
Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.
Printable Mechanic Spec Card & Torque Sequence
High-contrast pocket card for tire shops, track days, and garage toolboxes.
2024 Mazda CX-5
fitmentspec.com/mazda/cx-5/2024DIRECT HUB-CENTRIC WHEEL INTERCHANGE
Vehicles sharing both the exact 5x114.3 bolt pattern and 67.1 mm hub bore.
Cross-Vehicle OEM Wheel Swap Compatibility (5x114.3)
Verified OEM donor vehicles whose factory wheels fit the Mazda CX-5 hub (67.1mm).

Alfa Romeo 8C Competizione

Ferrari 296 GTB

Ferrari 458 Italia

Ferrari 488 GTB

Ferrari 812 Superfast

Ferrari California

Ferrari F8 Tributo

Ferrari Purosangue
⚡ Will It Rub? 2D Offset & Strut Clearance
Real-time inner strut clearance and outer fender poke calculation.
WINTER WHEEL & MINUS-SIZING ADVISOR
Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.
📡 TPMS Protocol & Relearn Procedure
US OEM Sensor Protocol & Step-by-Step Calibration
🔍 Pre-Purchase Fitment & Chassis Inspection Checklist
Universal 8-Point Buyer Guide →✓ Wheel Hub & Bearing Inspection
- • Check 67.1mm hub concentricity and inspect wheel bearings for quiet rotation.
- • Torque lug nuts to 85 ft-lbs.
✓ Suspension & Steering Clearance
- • Check front lower control arm rear oil-filled bushings for cracking or fluid leak.
- • Inspect rear multi-link bushings.
17-inch minimum rim diameter required for front caliper clearance.
📋 One-Click Forum Spec Exporter
Export verified specs for enthusiast forums (vBulletin, XenForo, Reddit).