FitmentSpec Logo
Mercedes-Benz logo
W206 (5th Gen - C300) (2022–2026)

2025 Mercedes-Benz C-Class

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2025 Mercedes-Benz C-Class
Factory Powertrain 2.0L Turbocharged Inline-4 M254 with 48V Integrated Starter-Generator (ISG)
255 HP (190 kW) 295 lb-ft 2.0L Inline-4 Turbo MHEV
Chassis Dimensions Exterior & Curb Weight
L: 187" W: 71.7" WB: 112.8" 3,825 - 3,957 lbs lbs
Bolt Pattern5-Lug
5x112
Center BoreHub Centric
66.6 mm
Hub Ring Spigot Diameter
Offset RangeET
+35 to +55
Flush Target: ET +38
Lug TorqueM14 x 1.5
111 ft-lbs
150 Nm • Ball Seat
Fastener: Ball Seat R14 Radius Lug Bolt. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2025 Mercedes-Benz C-Class Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 1,000 lbs
Max Towing (Braked)
1,000 lbs
454 kg
With factory trailer brakes
Max Payload Capacity
850 lbs
386 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
100 lbs
45 kg
Maximum hitch downward load
Hitch Receiver Class
Class I (1.25-inch Receiver)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2025 C-Class
Selected Load: 1,000 lbs • Vehicle Rating: 1,000 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Light duty towing up to 1,000 lbs. Recommended primarily for hitch-mounted accessories (bike racks, ski racks, cargo baskets).

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 350 lbs (159 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2025 Mercedes-Benz C-Class Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2025 Mercedes-Benz C-Class? The factory bolt pattern is 5x112 (5-lug) with a 66.6 mm center bore. The manufacturer specified wheel lug torque is 111 ft-lbs (150 Nm) using M14 x 1.5 Lug Bolts with a Ball Seat R14 Radius seating surface. Safe wheel offset range is +35mm to +55mm.

Factory OEM Wheel & Tire Configurations (2025)

2 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
Premium / Exclusive (18" Staggered 5-Spoke) 18x7.5 ET+40
225/45R18 Compare ⚡
35 PSI Find Tires →
AMG Line / Pinnacle (19" AMG Multi-Spoke Staggered) 19x7.5 ET+40
225/40R19 Compare ⚡
36 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Mercedes-Benz C-Class factory 66.6 mm hub snout.

Factory Hub: 66.6mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +6.5 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 66.6mm (OD: 73.1mm / ID: 66.6mm)
🛒 Order 73.1mm to 66.6mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 7.5" ET40
New Wheel Width:8.5" (+1.0" vs OEM)
New Wheel Offset (ET):ET30 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x112
2022-2026 FITMENT SPECIFICATION

2025 Mercedes-Benz C-Class

fitmentspec.com/mercedes-benz/c-class/2025
FINAL TORQUE111 ft-lbs(150 Nm)
Bolt Pattern (PCD)5x112
Center Bore66.6 mm
Fastener & ThreadM14 x 1.5Lug Bolt • Ball Seat R14 Radius
TPMS CalibrationDirect Tire Pressure Monitoring (Tire Pressure Monitor)Door Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x112 bolt pattern and 66.6 mm hub bore.

✓ No Centering Rings Required
2020-202466.5 mm CB
Audi A4
Torque: 111 ft-lbsSpecs →
2018-202666.5 mm CB
Audi A5
Torque: 111 ft-lbsSpecs →
2019-202666.5 mm CB
Audi A6
Torque: 111 ft-lbsSpecs →
2021-202666.5 mm CB
Audi Q5
Torque: 111 ft-lbsSpecs →
2017-202666.5 mm CB
Audi Q7
Torque: 111 ft-lbsSpecs →
2021-202666.5 mm CB
Audi RS6 Avant
Torque: 111 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +6.74" (+25.94%)
+25.94%
Original Baseline Tire225/45R18
New Target Tire285/70R17
QUICK SIZES:
26.0"32.7"
Speedometer Variance Table
30 mph gauge37.8 actual+7.8 mph
45 mph gauge56.7 actual+11.7 mph
60 mph gauge75.6 actual+15.6 mph
70 mph gauge88.2 actual+18.2 mph
80 mph gauge100.7 actual+20.7 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
215/50R17
Mounted on 17x6.5" Wheel
PCD: 5x112
Center Bore: 66.6 mm
🛡️ Technical Benefits for 2025 Mercedes-Benz C-Class
⛷️ Higher Ground Pressure
A narrower tire (215mm vs 225mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+5% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TIRE PRESSURE MONITORING (TIRE PRESSURE MONITOR) TPMS433 MHz
Architecture
Indirect Wheel Speed ABS
Sensor Part Number
A0009053907
Relearn Protocol
MBUX Touchscreen Calibration
Relearn Sequence0 / 1 Steps Complete
1
Adjust tires to front 35-36 PSI / rear 42 PSI cold. On MBUX touchscreen: Service > Tires > Use Current Pressures as New Reference Values > Restart. Drive for 10 minutes.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2025 C-Class

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2025 Mercedes-Benz C-Class)

8 Verified Q&As
Q What is the bolt pattern for a 2025 Mercedes-Benz C-Class?
The factory bolt pattern (PCD) for the 2025 Mercedes-Benz C-Class is 5x112 (5-lug configuration) with a pitch circle diameter of 112 mm. Center bore hub diameter is 66.6 mm.
Q What is the wheel lug torque specification for a 2025 Mercedes-Benz C-Class?
The official factory wheel lug torque specification for the 2025 Mercedes-Benz C-Class is 111 ft-lbs (150 Nm). Tighten all Lug Bolts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2025 Mercedes-Benz C-Class?
The official maximum braked towing capacity for the 2025 Mercedes-Benz C-Class is 1,000 lbs (454 kg) with a maximum tongue weight limit of 100 lbs. Recommended hitch receiver: Class I (1.25-inch Receiver). Unbraked trailer limit is 350 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2025 Mercedes-Benz C-Class?
Factory stock tire sizing for the 2025 Mercedes-Benz C-Class is 225/45R18 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2025 Mercedes-Benz C-Class and are hub centric rings needed?
The center bore diameter is exactly 66.6 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 66.6mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2025 Mercedes-Benz C-Class use?
The 2025 Mercedes-Benz C-Class utilizes M14 x 1.5 Lug Bolts with a Ball Seat R14 Radius seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2025 Mercedes-Benz C-Class have Direct or Indirect TPMS and how is it reset?
This vehicle utilizes standard valve stems without requiring active electronic TPMS sensor recalibration.
Q What aftermarket wheel offset and tire sizes fit a 2025 Mercedes-Benz C-Class without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +35mm and +55mm with a flush target of ET +38. Always test clearance at full steering lock.