FitmentSpec Logo
Mercedes-Benz logo
10th/11th Gen W213/W214 (E350 / E450 / AMG E53) (2017–2026)

2018 Mercedes-Benz E-Class

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2018 Mercedes-Benz E-Class
Factory Powertrain 3.0L Turbo Inline-6 EQ Boost (375 hp) / 2.0L Turbo (255 hp)
375 HP
Chassis Dimensions Exterior & Curb Weight
WB: 116.6"
Bolt Pattern5-Lug
5x112
Center BoreHub Centric
66.6 mm
Hub Ring Spigot Diameter
Offset RangeET
+32 to +48
Flush Target: ET +36
Lug TorqueM14 x 1.5
111 ft-lbs
150 Nm • Ball Seat
Fastener: Ball Seat R14 Radius Lug Bolt. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2018 Mercedes-Benz E-Class Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 1,000 lbs
Max Towing (Braked)
1,000 lbs
454 kg
With factory trailer brakes
Max Payload Capacity
850 lbs
386 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
100 lbs
45 kg
Maximum hitch downward load
Hitch Receiver Class
Class I (1.25-inch Receiver)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2018 E-Class
Selected Load: 1,000 lbs • Vehicle Rating: 1,000 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Light duty towing up to 1,000 lbs. Recommended primarily for hitch-mounted accessories (bike racks, ski racks, cargo baskets).

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 350 lbs (159 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2018 Mercedes-Benz E-Class Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2018 Mercedes-Benz E-Class? The factory bolt pattern is 5x112 (5-lug) with a 66.6 mm center bore. The manufacturer specified wheel lug torque is 111 ft-lbs (150 Nm) using M14 x 1.5 Lug Bolts with a Ball Seat R14 Radius seating surface. Safe wheel offset range is +32mm to +48mm.

Factory OEM Wheel & Tire Configurations (2018)

1 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
E450 4MATIC AMG Line (20" AMG Multi-Spoke Wheels) 20x8.5 ET+35
245/40R20 Compare ⚡
36 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Mercedes-Benz E-Class factory 66.6 mm hub snout.

Factory Hub: 66.6mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +6.5 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 66.6mm (OD: 73.1mm / ID: 66.6mm)
🛒 Order 73.1mm to 66.6mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 8.5" ET35
New Wheel Width:9.5" (+1.0" vs OEM)
New Wheel Offset (ET):ET25 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x112
2017-2026 FITMENT SPECIFICATION

2018 Mercedes-Benz E-Class

fitmentspec.com/mercedes-benz/e-class/2018
FINAL TORQUE111 ft-lbs(150 Nm)
Bolt Pattern (PCD)5x112
Center Bore66.6 mm
Fastener & ThreadM14 x 1.5Lug Bolt • Ball Seat R14 Radius
TPMS CalibrationDirectDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x112 bolt pattern and 66.6 mm hub bore.

✓ No Centering Rings Required
2020-202466.5 mm CB
Audi A4
Torque: 111 ft-lbsSpecs →
2018-202666.5 mm CB
Audi A5
Torque: 111 ft-lbsSpecs →
2019-202666.5 mm CB
Audi A6
Torque: 111 ft-lbsSpecs →
2021-202666.5 mm CB
Audi Q5
Torque: 111 ft-lbsSpecs →
2017-202666.5 mm CB
Audi Q7
Torque: 111 ft-lbsSpecs →
2021-202666.5 mm CB
Audi RS6 Avant
Torque: 111 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +4.99" (+18.01%)
+18.01%
Original Baseline Tire245/40R20
New Target Tire285/70R17
QUICK SIZES:
27.7"32.7"
Speedometer Variance Table
30 mph gauge35.4 actual+5.4 mph
45 mph gauge53.1 actual+8.1 mph
60 mph gauge70.8 actual+10.8 mph
70 mph gauge82.6 actual+12.6 mph
80 mph gauge94.4 actual+14.4 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
225/50R18
Mounted on 18x7.5" Wheel
PCD: 5x112
Center Bore: 66.6 mm
🛡️ Technical Benefits for 2018 Mercedes-Benz E-Class
⛷️ Higher Ground Pressure
A narrower tire (225mm vs 245mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+10% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TPMS433 MHz
Architecture
Direct Valve Stem Transducer
Sensor Part Number
N/A (ABS Sensor)
Relearn Protocol
Auto-Relearn Drive Cycle
Relearn Sequence0 / 1 Steps Complete
1
Drive vehicle above 15 mph (25 km/h) for up to 20 minutes to automatically synchronize sensor IDs.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2018 E-Class

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2018 Mercedes-Benz E-Class)

8 Verified Q&As
Q What is the bolt pattern for a 2018 Mercedes-Benz E-Class?
The factory bolt pattern (PCD) for the 2018 Mercedes-Benz E-Class is 5x112 (5-lug configuration) with a pitch circle diameter of 112 mm. Center bore hub diameter is 66.6 mm.
Q What is the wheel lug torque specification for a 2018 Mercedes-Benz E-Class?
The official factory wheel lug torque specification for the 2018 Mercedes-Benz E-Class is 111 ft-lbs (150 Nm). Tighten all Lug Bolts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2018 Mercedes-Benz E-Class?
The official maximum braked towing capacity for the 2018 Mercedes-Benz E-Class is 1,000 lbs (454 kg) with a maximum tongue weight limit of 100 lbs. Recommended hitch receiver: Class I (1.25-inch Receiver). Unbraked trailer limit is 350 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2018 Mercedes-Benz E-Class?
Factory stock tire sizing for the 2018 Mercedes-Benz E-Class is 245/40R20 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2018 Mercedes-Benz E-Class and are hub centric rings needed?
The center bore diameter is exactly 66.6 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 66.6mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2018 Mercedes-Benz E-Class use?
The 2018 Mercedes-Benz E-Class utilizes M14 x 1.5 Lug Bolts with a Ball Seat R14 Radius seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2018 Mercedes-Benz E-Class have Direct or Indirect TPMS and how is it reset?
It features a Direct TPMS system utilizing physical valve-stem pressure sensors operating at 433 MHz. The relearn protocol is Auto-Relearn Drive Cycle: Drive vehicle above 15 mph (25 km/h) for up to 20 minutes to automatically synchronize sensor IDs.
Q What aftermarket wheel offset and tire sizes fit a 2018 Mercedes-Benz E-Class without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +32mm and +48mm with a flush target of ET +36. Always test clearance at full steering lock.