FitmentSpec Logo
Mercedes-Benz logo
2nd Gen W463A (AMG G 63 4.0L Bi-Turbo V8 AWD) (2019–2026)

2023 Mercedes-Benz G-Class

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2023 Mercedes-Benz G-Class
OEM Powertrain Standard Specification
Chassis Dimensions Exterior & Curb Weight
Bolt Pattern5-Lug
5x130
Center BoreHub Centric
84.1 mm
Hub Ring Spigot Diameter
Offset RangeET
+30 to +45
Flush Target: ET +35
Lug TorqueM14 x 1.5
111 ft-lbs
150 Nm • Ball Seat
Fastener: Ball Seat R14 Lug Bolt. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2023 Mercedes-Benz G-Class Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 1,000 lbs
Max Towing (Braked)
1,000 lbs
454 kg
With factory trailer brakes
Max Payload Capacity
850 lbs
386 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
100 lbs
45 kg
Maximum hitch downward load
Hitch Receiver Class
Class I (1.25-inch Receiver)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2023 G-Class
Selected Load: 1,000 lbs • Vehicle Rating: 1,000 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Light duty towing up to 1,000 lbs. Recommended primarily for hitch-mounted accessories (bike racks, ski racks, cargo baskets).

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 350 lbs (159 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2023 Mercedes-Benz G-Class Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2023 Mercedes-Benz G-Class? The factory bolt pattern is 5x130 (5-lug) with a 84.1 mm center bore. The manufacturer specified wheel lug torque is 111 ft-lbs (150 Nm) using M14 x 1.5 Lug Bolts with a Ball Seat R14 seating surface. Safe wheel offset range is +30mm to +45mm.

Factory OEM Wheel & Tire Configurations (2023)

1 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
AMG Night Package (22" AMG Cross-Spoke Forged Matte Black) 22x10 ET+36
295/40R22 Compare ⚡
38 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Mercedes-Benz G-Class factory 84.1 mm hub snout.

Factory Hub: 84.1mm
Hub Diagnostic Result
🚨 INCOMPATIBLE WHEEL BORE (TOO SMALL)

The wheel bore (73.1 mm) is smaller than the car hub (84.1 mm). The wheel will NOT physically seat flush on the hub face without wheel spacers or center-bore machining.

💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 10" ET36
New Wheel Width:11.0" (+1.0" vs OEM)
New Wheel Offset (ET):ET26 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x130
2019-2026 FITMENT SPECIFICATION

2023 Mercedes-Benz G-Class

fitmentspec.com/mercedes-benz/g-class/2023
FINAL TORQUE111 ft-lbs(150 Nm)
Bolt Pattern (PCD)5x130
Center Bore84.1 mm
Fastener & ThreadM14 x 1.5Lug Bolt • Ball Seat R14
TPMS CalibrationDirectDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Significant DifferenceDiameter: +1.42" (+4.53%)
+4.53%
Original Baseline Tire295/40R22
New Target Tire285/70R17
QUICK SIZES:
31.3"32.7"
Speedometer Variance Table
30 mph gauge31.4 actual+1.4 mph
45 mph gauge47.0 actual+2.0 mph
60 mph gauge62.7 actual+2.7 mph
70 mph gauge73.2 actual+3.2 mph
80 mph gauge83.6 actual+3.6 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
275/50R20
Mounted on 20x9.0" Wheel
PCD: 5x130
Center Bore: 84.1 mm
🛡️ Technical Benefits for 2023 Mercedes-Benz G-Class
⛷️ Higher Ground Pressure
A narrower tire (275mm vs 295mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+10% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TPMS433 MHz
Architecture
Direct Valve Stem Transducer
Sensor Part Number
N/A (ABS Sensor)
Relearn Protocol
Auto-Relearn Drive Cycle
Relearn Sequence0 / 1 Steps Complete
1
Drive vehicle above 15 mph (25 km/h) for up to 20 minutes to automatically synchronize sensor IDs.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2023 G-Class

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2023 Mercedes-Benz G-Class)

8 Verified Q&As
Q What is the bolt pattern for a 2023 Mercedes-Benz G-Class?
The factory bolt pattern (PCD) for the 2023 Mercedes-Benz G-Class is 5x130 (5-lug configuration) with a pitch circle diameter of 130 mm. Center bore hub diameter is 84.1 mm.
Q What is the wheel lug torque specification for a 2023 Mercedes-Benz G-Class?
The official factory wheel lug torque specification for the 2023 Mercedes-Benz G-Class is 111 ft-lbs (150 Nm). Tighten all Lug Bolts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2023 Mercedes-Benz G-Class?
The official maximum braked towing capacity for the 2023 Mercedes-Benz G-Class is 1,000 lbs (454 kg) with a maximum tongue weight limit of 100 lbs. Recommended hitch receiver: Class I (1.25-inch Receiver). Unbraked trailer limit is 350 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2023 Mercedes-Benz G-Class?
Factory stock tire sizing for the 2023 Mercedes-Benz G-Class is 295/40R22 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2023 Mercedes-Benz G-Class and are hub centric rings needed?
The center bore diameter is exactly 84.1 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 84.1mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2023 Mercedes-Benz G-Class use?
The 2023 Mercedes-Benz G-Class utilizes M14 x 1.5 Lug Bolts with a Ball Seat R14 seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2023 Mercedes-Benz G-Class have Direct or Indirect TPMS and how is it reset?
It features a Direct TPMS system utilizing physical valve-stem pressure sensors operating at 433 MHz. The relearn protocol is Auto-Relearn Drive Cycle: Drive vehicle above 15 mph (25 km/h) for up to 20 minutes to automatically synchronize sensor IDs.
Q What aftermarket wheel offset and tire sizes fit a 2023 Mercedes-Benz G-Class without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +30mm and +45mm with a flush target of ET +35. Always test clearance at full steering lock.