2026 Mercedes-Benz S-Class
Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.
2026 Mercedes-Benz S-Class Towing Capacity & Hitch Telemetry
Official manufacturer braked tow ratings, max tongue weight, and payload limits.
Light duty towing up to 1,000 lbs. Recommended primarily for hitch-mounted accessories (bike racks, ski racks, cargo baskets).
- • Unbraked trailer maximum limit: 350 lbs (159 kg).
- • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
- • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.
2026 Mercedes-Benz S-Class Quick Fitment Answers
Looking for exact hub and wheel specifications for the 2026 Mercedes-Benz S-Class? The factory bolt pattern is 5x112 (5-lug) with a 66.6 mm center bore. The manufacturer specified wheel lug torque is 111 ft-lbs (150 Nm) using M14 x 1.5 Lug Bolts with a Ball Seat R14 Radius seating surface. Safe wheel offset range is +30mm to +45mm.
Factory OEM Wheel & Tire Configurations (2026)
1 TRIM OPTIONS| Trim Name | Wheel Size | Tire Specification | Placard PSI | Equipment |
|---|---|---|---|---|
| S580 4MATIC Executive (21" AMG V-Multispoke Wheels) | 21x9 ET+34 | 255/35R21
Compare ⚡
| 38 PSI | Find Tires → |
Hub Centric Ring Finder & Vibration Eliminator
Precision adapter sizing for Mercedes-Benz S-Class factory 66.6 mm hub snout.
The wheel bore is +6.5 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:
OEM vs. Aftermarket Visual Stance & Poke Gauge
Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.
Printable Mechanic Spec Card & Torque Sequence
High-contrast pocket card for tire shops, track days, and garage toolboxes.
2026 Mercedes-Benz S-Class
fitmentspec.com/mercedes-benz/s-class/2026DIRECT HUB-CENTRIC WHEEL INTERCHANGE
Vehicles sharing both the exact 5x112 bolt pattern and 66.6 mm hub bore.
Cross-Vehicle OEM Wheel Swap Compatibility (5x112)
Verified OEM donor vehicles whose factory wheels fit the Mercedes-Benz S-Class hub (66.6mm).

Audi A4
Audi A5
Audi A6

Audi Q5
Audi Q7
Audi RS6 Avant

Audi S4
Audi SQ5
⚡ Will It Rub? 2D Offset & Strut Clearance
Real-time inner strut clearance and outer fender poke calculation.
WINTER WHEEL & MINUS-SIZING ADVISOR
Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.
📡 TPMS Protocol & Relearn Procedure
US OEM Sensor Protocol & Step-by-Step Calibration