FitmentSpec Logo
Rivian logo
Gen 1 & Gen 2 (Adventure 3-Row Electric SUV) (2022–2026)

2023 Rivian R1S

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2023 Rivian R1S
Factory Powertrain Dual / Tri / Quad Electric Motors AWD (665 hp - 1025 hp total)
835 HP
Chassis Dimensions Exterior & Curb Weight
WB: 121.1"
Center BoreHub Centric
64.1 mm
Hub Ring Spigot Diameter
Offset RangeET
+42 to +52
Flush Target: ET +48
Lug TorqueM14 x 1.5
140 ft-lbs
190 Nm • Cone Seat
Fastener: Cone 60° Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2023 Rivian R1S Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 7,700 lbs
Max Towing (Braked)
7,700 lbs
3,493 kg
With factory trailer brakes
Max Payload Capacity
1,764 lbs
800 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
770 lbs
349 kg
Maximum hitch downward load
Hitch Receiver Class
Class III/IV (Integrated Receiver)
Weight distribution rated
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2023 R1S
Selected Load: 7,700 lbs • Vehicle Rating: 7,700 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Rated at 7,700 lbs with standard dual/tri/quad electric powertrain and dynamic weight-distributing air suspension.

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 1500 lbs (680 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2023 Rivian R1S Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2023 Rivian R1S? The factory bolt pattern is 5x139.7 (5-lug) with a 64.1 mm center bore. The manufacturer specified wheel lug torque is 140 ft-lbs (190 Nm) using M14 x 1.5 Lug Nuts with a Cone 60° seating surface. Safe wheel offset range is +42mm to +52mm.

Factory OEM Wheel & Tire Configurations (2023)

1 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
R1S Adventure (21" Road Wheels) 21x8.5 ET+48
275/55R21 (Pirelli Scorpion Verde A/S) Compare ⚡
48 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Rivian R1S factory 64.1 mm hub snout.

Factory Hub: 64.1mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +9.0 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 64.1mm (OD: 73.1mm / ID: 64.1mm)
🛒 Order 73.1mm to 64.1mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 8.5" ET48
New Wheel Width:9.5" (+1.0" vs OEM)
New Wheel Offset (ET):ET38 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x139.7
2022-2026 FITMENT SPECIFICATION

2023 Rivian R1S

fitmentspec.com/rivian/r1s/2023
FINAL TORQUE140 ft-lbs(190 Nm)
Bolt Pattern (PCD)5x139.7
Center Bore64.1 mm
Fastener & ThreadM14 x 1.5Lug Nut • Cone 60°
TPMS CalibrationDirectDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x139.7 bolt pattern and 64.1 mm hub bore.

✓ No Centering Rings Required
2022-202664.1 mm CB
Rivian R1T
Torque: 140 ft-lbsSpecs →
2022-202664.1 mm CB
Rivian R1T
Torque: 140 ft-lbsSpecs →
🔄

Cross-Vehicle OEM Wheel Swap Compatibility (5x139.7)

Verified OEM donor vehicles whose factory wheels fit the Rivian R1S hub (64.1mm).

Wheel Swap Calculator →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Safe MatchDiameter: -0.20" (-0.61%)
-0.61%
Original Baseline Tire275/55R21
New Target Tire285/70R17
QUICK SIZES:
32.9"32.7"
Speedometer Variance Table
30 mph gauge29.8 actual-0.2 mph
45 mph gauge44.7 actual-0.3 mph
60 mph gauge59.6 actual-0.4 mph
70 mph gauge69.6 actual-0.4 mph
80 mph gauge79.5 actual-0.5 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
255/65R19
Mounted on 19x7.5" Wheel
PCD: 5x139.7
Center Bore: 64.1 mm
🛡️ Technical Benefits for 2023 Rivian R1S
⛷️ Higher Ground Pressure
A narrower tire (255mm vs 275mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+10% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TPMS433 MHz
Architecture
Direct Valve Stem Transducer
Sensor Part Number
N/A (ABS Sensor)
Relearn Protocol
Auto-Relearn Drive Cycle
Relearn Sequence0 / 1 Steps Complete
1
Drive vehicle above 15 mph (25 km/h) for up to 20 minutes to automatically synchronize sensor IDs.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2023 R1S

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2023 Rivian R1S)

8 Verified Q&As
Q What is the bolt pattern for a 2023 Rivian R1S?
The factory bolt pattern (PCD) for the 2023 Rivian R1S is 5x139.7 (5-lug configuration) with a pitch circle diameter of 139.7 mm. Center bore hub diameter is 64.1 mm.
Q What is the wheel lug torque specification for a 2023 Rivian R1S?
The official factory wheel lug torque specification for the 2023 Rivian R1S is 140 ft-lbs (190 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2023 Rivian R1S?
The official maximum braked towing capacity for the 2023 Rivian R1S is 7,700 lbs (3,493 kg) with a maximum tongue weight limit of 770 lbs. Recommended hitch receiver: Class III/IV (Integrated Receiver). Unbraked trailer limit is 1,500 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2023 Rivian R1S?
Factory stock tire sizing for the 2023 Rivian R1S is 275/55R21 (Pirelli Scorpion Verde A/S) with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2023 Rivian R1S and are hub centric rings needed?
The center bore diameter is exactly 64.1 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 64.1mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2023 Rivian R1S use?
The 2023 Rivian R1S utilizes M14 x 1.5 Lug Nuts with a Cone 60° seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2023 Rivian R1S have Direct or Indirect TPMS and how is it reset?
It features a Direct TPMS system utilizing physical valve-stem pressure sensors operating at 433 MHz. The relearn protocol is Auto-Relearn Drive Cycle: Drive vehicle above 15 mph (25 km/h) for up to 20 minutes to automatically synchronize sensor IDs.
Q What aftermarket wheel offset and tire sizes fit a 2023 Rivian R1S without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +42mm and +52mm with a flush target of ET +48. Always test clearance at full steering lock.