FitmentSpec Logo
Subaru logo
WM (1st Gen Facelift) (2021–2026)

2021 Subaru Ascent

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2021 Subaru Ascent
Factory Powertrain 2.4L DOHC 16-Valve Intercooled Turbocharged Boxer-4 FA24F
260 HP (194 kW) 277 lb-ft 2.4L Flat-4 Turbo
Chassis Dimensions Exterior & Curb Weight
L: 196.8" W: 76" WB: 113.8" 4,421 - 4,603 lbs lbs
Center BoreHub Centric
56.1 mm
Hub Ring Spigot Diameter
Offset RangeET
+40 to +55
Flush Target: ET +40
Lug TorqueM12 x 1.25
89 ft-lbs
120 Nm • Conical Seat
Fastener: Conical 60 Degree Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2021 Subaru Ascent Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 5,000 lbs
Max Towing (Braked)
5,000 lbs
2,268 kg
With factory trailer brakes
Max Payload Capacity
1,530 lbs
694 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
500 lbs
227 kg
Maximum hitch downward load
Hitch Receiver Class
Class III (2-inch Hidden Receiver)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2021 Ascent
Selected Load: 5,000 lbs • Vehicle Rating: 5,000 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Premium, Limited, and Touring models rated at 5,000 lbs with high-torque CVT transmission oil cooler (Base trim rated at 2,000 lbs).

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 1500 lbs (680 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2021 Subaru Ascent Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2021 Subaru Ascent? The factory bolt pattern is 5x114.3 (5-lug) with a 56.1 mm center bore. The manufacturer specified wheel lug torque is 89 ft-lbs (120 Nm) using M12 x 1.25 Lug Nuts with a Conical 60 Degree seating surface. Safe wheel offset range is +40mm to +55mm.

Factory OEM Wheel & Tire Configurations (2021)

2 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
Premium / Onyx Edition (18" Alloy) 18x7.5 ET+55
245/60R18 Compare ⚡
33 PSI Find Tires →
Limited / Touring (20" Dark Gray Machine Finish) 20x7.5 ET+55
245/50R20 Compare ⚡
35 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Subaru Ascent factory 56.1 mm hub snout.

Factory Hub: 56.1mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +17.0 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 56.1mm (OD: 73.1mm / ID: 56.1mm)
🛒 Order 73.1mm to 56.1mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 7.5" ET55
New Wheel Width:8.5" (+1.0" vs OEM)
New Wheel Offset (ET):ET45 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x114.3
2021-2026 FITMENT SPECIFICATION

2021 Subaru Ascent

fitmentspec.com/subaru/ascent/2021
FINAL TORQUE89 ft-lbs(120 Nm)
Bolt Pattern (PCD)5x114.3
Center Bore56.1 mm
Fastener & ThreadM12 x 1.25Lug Nut • Conical 60 Degree
TPMS CalibrationDirect Tire Pressure Monitoring SensorDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x114.3 bolt pattern and 56.1 mm hub bore.

✓ No Centering Rings Required
2024-202656.1 mm CB
Subaru Crosstrek
Torque: 89 ft-lbsSpecs →
2019-202656.1 mm CB
Subaru Forester
Torque: 89 ft-lbsSpecs →
2024-202656.1 mm CB
Subaru Impreza
Torque: 89 ft-lbsSpecs →
2020-202656.1 mm CB
Subaru Legacy
Torque: 89 ft-lbsSpecs →
2020-202656.1 mm CB
Subaru Outback
Torque: 89 ft-lbsSpecs →
2022-202656.1 mm CB
Subaru WRX
Torque: 89 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +3.13" (+10.60%)
+10.60%
Original Baseline Tire245/60R18
New Target Tire285/70R17
QUICK SIZES:
29.6"32.7"
Speedometer Variance Table
30 mph gauge33.2 actual+3.2 mph
45 mph gauge49.8 actual+4.8 mph
60 mph gauge66.4 actual+6.4 mph
70 mph gauge77.4 actual+7.4 mph
80 mph gauge88.5 actual+8.5 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
235/65R17
Mounted on 17x6.5" Wheel
PCD: 5x114.3
Center Bore: 56.1 mm
🛡️ Technical Benefits for 2021 Subaru Ascent
⛷️ Higher Ground Pressure
A narrower tire (235mm vs 245mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+5% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TIRE PRESSURE MONITORING SENSOR TPMS433 MHz
Architecture
Indirect Wheel Speed ABS
Sensor Part Number
28103-FL00A
Relearn Protocol
Drive Relearn
Relearn Sequence0 / 1 Steps Complete
1
Inflate tires to 33-35 PSI cold. Drive vehicle continuously above 25 mph for 10-15 minutes.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2021 Ascent

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2021 Subaru Ascent)

8 Verified Q&As
Q What is the bolt pattern for a 2021 Subaru Ascent?
The factory bolt pattern (PCD) for the 2021 Subaru Ascent is 5x114.3 (5-lug configuration) with a pitch circle diameter of 114.3 mm. Center bore hub diameter is 56.1 mm.
Q What is the wheel lug torque specification for a 2021 Subaru Ascent?
The official factory wheel lug torque specification for the 2021 Subaru Ascent is 89 ft-lbs (120 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2021 Subaru Ascent?
The official maximum braked towing capacity for the 2021 Subaru Ascent is 5,000 lbs (2,268 kg) with a maximum tongue weight limit of 500 lbs. Recommended hitch receiver: Class III (2-inch Hidden Receiver). Unbraked trailer limit is 1,500 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2021 Subaru Ascent?
Factory stock tire sizing for the 2021 Subaru Ascent is 245/60R18 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2021 Subaru Ascent and are hub centric rings needed?
The center bore diameter is exactly 56.1 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 56.1mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2021 Subaru Ascent use?
The 2021 Subaru Ascent utilizes M12 x 1.25 Lug Nuts with a Conical 60 Degree seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2021 Subaru Ascent have Direct or Indirect TPMS and how is it reset?
This vehicle utilizes standard valve stems without requiring active electronic TPMS sensor recalibration.
Q What aftermarket wheel offset and tire sizes fit a 2021 Subaru Ascent without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +40mm and +55mm with a flush target of ET +40. Always test clearance at full steering lock.