2025 Tesla Cybertruck
Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.
2025 Tesla Cybertruck Towing Capacity & Hitch Telemetry
Official manufacturer braked tow ratings, max tongue weight, and payload limits.
AWD and Cyberbeast trims are rated for 11,000 lbs braked towing (discontinued Long Range RWD rated at 7,500 lbs). Tesla Owner's Manual requires setting air suspension to Low and increasing LT285/65R20 AT tire pressure up to 65 PSI under maximum GVWR/towing loads.
- β’ Unbraked trailer maximum limit: 1500 lbs (680 kg).
- β’ Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
- β’ Maintain tongue weight between 10%β15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.
2025 Tesla Cybertruck Quick Fitment Answers
Looking for exact hub and wheel specifications for the 2025 Tesla Cybertruck? The factory bolt pattern is 6x139.7 (6-lug) with a 84.1 mm center bore. The manufacturer specified wheel lug torque is 151 ft-lbs (205 Nm) using M14x1.5 Lug Nuts with a Conical 60Β° seating surface. Safe wheel offset range is +35mm to +60mm.
Factory OEM Wheel & Tire Configurations (2025)
3 TRIM OPTIONS| Trim Name | Wheel Size | Tire Specification | Placard PSI | Equipment |
|---|---|---|---|---|
| AWD / Cyberbeast (20" Cyber Wheel - Goodyear Wrangler Territory RT All-Terrain) | 20x9 ET+58.5 | LT285/65R20
Compare β‘
| 50 / 50 PSI | Find Tires β |
| AWD / Cyberbeast (20" Core Wheel - Pirelli Scorpion ATR All-Season) | 20x9 ET+58.5 | 285/65R20
Compare β‘
| 50 / 50 PSI | Find Tires β |
| Long Range / Base (18" Core Wheel - Goodyear Wrangler Territory HT All-Season) | 18x9 ET+58.5 | 285/70R18
Compare β‘
| 50 / 50 PSI | Find Tires β |
π§ Technical Service Bulletins (TSB) & Suspension Chronic Issues
3 DOCUMENTED ISSUESVisible rubber chafing on tire sidewall and clicking noises from factory 20-inch Cyber aero wheel covers
Original Foundation Series aero cover retention tabs contacted the LT285/65R20 Goodyear Wrangler Territory RT sidewall bulge under deflection.
Accelerated inner shoulder wear on 35-inch tires before 15,000 miles
6,800 lb curb weight combined with rear steer-by-wire toe/camber changes across adaptive air suspension ride heights.
Under-torqued lug nuts after third-party tire service
Service shops mistakenly applying Model 3/Y/S/X 129 lb-ft torque instead of Cybertruck's required 151 lb-ft (205 Nm) spec.
Hub Centric Ring Finder & Vibration Eliminator
Precision adapter sizing for Tesla Cybertruck factory 84.1 mm hub snout.
The wheel bore (73.1 mm) is smaller than the car hub (84.1 mm). The wheel will NOT physically seat flush on the hub face without wheel spacers or center-bore machining.
OEM vs. Aftermarket Visual Stance & Poke Gauge
Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.
Printable Mechanic Spec Card & Torque Sequence
High-contrast pocket card for tire shops, track days, and garage toolboxes.
2025 Tesla Cybertruck
fitmentspec.com/tesla/cybertruck/2025DIRECT HUB-CENTRIC WHEEL INTERCHANGE
Vehicles sharing both the exact 6x139.7 bolt pattern and 84.1 mm hub bore.
Cross-Vehicle OEM Wheel Swap Compatibility (6x139.7)
Verified OEM donor vehicles whose factory wheels fit the Tesla Cybertruck hub (84.1mm).

Cadillac Escalade
Chevrolet Colorado

Chevrolet Silverado 1500

Chevrolet Silverado 1500

Chevrolet Suburban

Chevrolet Tahoe

GMC Canyon

GMC Sierra 1500
β‘ Will It Rub? 2D Offset & Strut Clearance
Real-time inner strut clearance and outer fender poke calculation.
WINTER WHEEL & MINUS-SIZING ADVISOR
Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.
π‘ TPMS Protocol & Relearn Procedure
US OEM Sensor Protocol & Step-by-Step Calibration
π Pre-Purchase Fitment & Chassis Inspection Checklist
Universal 8-Point Buyer Guide ββ Wheel Hub & Bearing Inspection
- β’ Verify all six M14x1.5 lug nuts per wheel are torqued to 151 lb-ft (205 Nm) with a 21mm socketβnever 129 lb-ft.
- β’ Inspect 84.1mm hub bore seating surface for galvanic corrosion between aluminum wheel and steel hub flange.
β Suspension & Steering Clearance
- β’ Cycle adaptive air suspension from Entry/Low through High/Extract and inspect for leaks or uneven corner ride height.
- β’ Test rear 4-wheel steering actuation at low speeds for grinding or fault alerts, and inspect tire sidewalls for aero-cover contact wear.
Factory 18-inch (18x9.0 ET58.5) and 20-inch (20x9.0 ET58.5) wheels clear OEM calipers; aftermarket 18-inch wheels must be test-fitted for barrel-to-caliper and rear steering knuckle clearance.
π One-Click Forum Spec Exporter
Export verified specs for enthusiast forums (vBulletin, XenForo, Reddit).
Verified Hardware & Installation Kit for 2025 Cybertruck
Frequently Asked Questions (2025 Tesla Cybertruck)
Q What is the bolt pattern for a 2025 Tesla Cybertruck?
Q What is the wheel lug torque specification for a 2025 Tesla Cybertruck?
Q What is the towing capacity of a 2025 Tesla Cybertruck?
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2025 Tesla Cybertruck?
Q What is the center bore size on a 2025 Tesla Cybertruck and are hub centric rings needed?
Q What size lug nuts and thread pitch does a 2025 Tesla Cybertruck use?
Q Does the 2025 Tesla Cybertruck have Direct or Indirect TPMS and how is it reset?
Q What aftermarket wheel offset and tire sizes fit a 2025 Tesla Cybertruck without rubbing?
β οΈ Official NHTSA Safety Recalls & Bulletins
The accelerator pedal pad may dislodge when high force is applied and become trapped by the interior trim above the pedal.
Excessive electrical current can cause the front windshield wiper motor controller gate driver component to fail.
The trunk bed trim sail applique may not have been adhered properly per specification and can loosen or detach.
A fault in the drive inverter MOSFETs can cause the inverter to stop producing torque.
A software issue prevents the TPMS malfunction indicator light from remaining illuminated between drive cycles when a sensor fault exists.
The stainless steel cant rail exterior trim panel can delaminate from the adhesive backing and separate from the vehicle.
Software calibration causes front parking lights to exceed maximum luminous intensity permitted under FMVSS 108 (2024β2026 models).