FitmentSpec Logo
Tesla logo
Plaid / Long Range (Palladium Refresh) (2021–2026)

2024 Tesla Model S

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2024 Tesla Model S
Factory Powertrain Tri-Motor All-Wheel Drive (Plaid Carbon-Sleeved Rotors)
1020 HP (761 kW) 1050 lb-ft 0 Tri-Motor EV
Chassis Dimensions Exterior & Curb Weight
L: 196" W: 78.2" WB: 116.5" 4,561 - 4,766 lbs lbs
Bolt Pattern5-Lug
5x120
Center BoreHub Centric
64.1 mm
Hub Ring Spigot Diameter
Offset RangeET
+35 to +45
Flush Target: ET +35
Lug TorqueM14 x 1.5
129 ft-lbs
175 Nm • Conical Seat
Fastener: Conical 60 Degree Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2024 Tesla Model S Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 3,500 lbs
Max Towing (Braked)
3,500 lbs
1,588 kg
With factory trailer brakes
Max Payload Capacity
990 lbs
449 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
350 lbs
159 kg
Maximum hitch downward load
Hitch Receiver Class
Class II (Optional tow kit)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2024 Model S
Selected Load: 3,500 lbs • Vehicle Rating: 3,500 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

European specification rated for up to 1,600 kg (3,500 lbs) braked trailer towing with factory tow software.

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 1225 lbs (556 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2024 Tesla Model S Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2024 Tesla Model S? The factory bolt pattern is 5x120 (5-lug) with a 64.1 mm center bore. The manufacturer specified wheel lug torque is 129 ft-lbs (175 Nm) using M14 x 1.5 Lug Nuts with a Conical 60 Degree seating surface. Safe wheel offset range is +35mm to +45mm.

Factory OEM Wheel & Tire Configurations (2024)

2 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
Long Range / Tempest (19" Staggered) 19x9.5 ET+40
255/45R19 Compare ⚡
42 PSI Find Tires →
Plaid / Arachnid (21" Staggered Ultra-Performance) 21x9.5 ET+40
265/35ZR21 (Michelin Pilot Sport 4S) Compare ⚡
42 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Tesla Model S factory 64.1 mm hub snout.

Factory Hub: 64.1mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +9.0 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 64.1mm (OD: 73.1mm / ID: 64.1mm)
🛒 Order 73.1mm to 64.1mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 9.5" ET40
New Wheel Width:10.5" (+1.0" vs OEM)
New Wheel Offset (ET):ET30 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x120
2021-2026 FITMENT SPECIFICATION

2024 Tesla Model S

fitmentspec.com/tesla/model-s/2024
FINAL TORQUE129 ft-lbs(175 Nm)
Bolt Pattern (PCD)5x120
Center Bore64.1 mm
Fastener & ThreadM14 x 1.5Lug Nut • Conical 60 Degree
TPMS CalibrationDirect Bluetooth Low Energy (BLE) TPMSDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x120 bolt pattern and 64.1 mm hub bore.

✓ No Centering Rings Required
2024-202664.1 mm CB
Acura Integra Type S
Torque: 129 ft-lbsSpecs →
2022-202664.1 mm CB
Acura MDX
Torque: 129 ft-lbsSpecs →
2017-202264.1 mm CB
Acura NSX
Torque: 129 ft-lbsSpecs →
2014-202064.1 mm CB
Acura RLX
Torque: 129 ft-lbsSpecs →
2004-201464.1 mm CB
Acura TL
Torque: 129 ft-lbsSpecs →
2021-202664.1 mm CB
Acura TLX
Torque: 129 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +4.67" (+16.67%)
+16.67%
Original Baseline Tire255/45R19
New Target Tire285/70R17
QUICK SIZES:
28.0"32.7"
Speedometer Variance Table
30 mph gauge35.0 actual+5.0 mph
45 mph gauge52.5 actual+7.5 mph
60 mph gauge70.0 actual+10.0 mph
70 mph gauge81.7 actual+11.7 mph
80 mph gauge93.3 actual+13.3 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
235/55R17
Mounted on 17x8.5" Wheel
PCD: 5x120
Center Bore: 64.1 mm
🛡️ Technical Benefits for 2024 Tesla Model S
⛷️ Higher Ground Pressure
A narrower tire (235mm vs 255mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+10% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT BLUETOOTH LOW ENERGY (BLE) TPMS TPMS2400 MHz
Architecture
Indirect Wheel Speed ABS
Sensor Part Number
1490701-01-B
Relearn Protocol
Automatic Touchscreen Relearn
Relearn Sequence0 / 1 Steps Complete
1
Inflate tires to 42 PSI cold. On touchscreen, go to Controls > Service > Wheel & Tire Configuration. Select installed wheel size and drive for 5-10 minutes.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2024 Model S

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2024 Tesla Model S)

8 Verified Q&As
Q What is the bolt pattern for a 2024 Tesla Model S?
The factory bolt pattern (PCD) for the 2024 Tesla Model S is 5x120 (5-lug configuration) with a pitch circle diameter of 120 mm. Center bore hub diameter is 64.1 mm.
Q What is the wheel lug torque specification for a 2024 Tesla Model S?
The official factory wheel lug torque specification for the 2024 Tesla Model S is 129 ft-lbs (175 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2024 Tesla Model S?
The official maximum braked towing capacity for the 2024 Tesla Model S is 3,500 lbs (1,588 kg) with a maximum tongue weight limit of 350 lbs. Recommended hitch receiver: Class II (Optional tow kit). Unbraked trailer limit is 1,225 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2024 Tesla Model S?
Factory stock tire sizing for the 2024 Tesla Model S is 255/45R19 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2024 Tesla Model S and are hub centric rings needed?
The center bore diameter is exactly 64.1 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 64.1mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2024 Tesla Model S use?
The 2024 Tesla Model S utilizes M14 x 1.5 Lug Nuts with a Conical 60 Degree seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2024 Tesla Model S have Direct or Indirect TPMS and how is it reset?
This vehicle utilizes standard valve stems without requiring active electronic TPMS sensor recalibration.
Q What aftermarket wheel offset and tire sizes fit a 2024 Tesla Model S without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +35mm and +45mm with a flush target of ET +35. Always test clearance at full steering lock.