2022 Toyota Camry
Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.
2022 Toyota Camry Towing Capacity & Hitch Telemetry
Official manufacturer braked tow ratings, max tongue weight, and payload limits.
US-spec rated for up to 1,000 lbs (European spec rated for up to 1,500 kg / 3,300 lbs braked). Primarily intended for hitch racks or small lightweight utility cargo.
- • Unbraked trailer maximum limit: 350 lbs (159 kg).
- • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
- • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.
2022 Toyota Camry Quick Fitment Answers
Looking for exact hub and wheel specifications for the 2022 Toyota Camry? The factory bolt pattern is 5x114.3 (5-lug) with a 60.1 mm center bore. The manufacturer specified wheel lug torque is 76 ft-lbs (103 Nm) using M12x1.5 Lug Nuts with a Conical 60° seating surface. Safe wheel offset range is +35mm to +50mm.
Factory OEM Wheel & Tire Configurations (2022)
2 TRIM OPTIONS| Trim Name | Wheel Size | Tire Specification | Placard PSI | Equipment |
|---|---|---|---|---|
| LE / SE | 17x7.5 ET+40 | 215/55R17
Compare ⚡
| 35 / 35 PSI | Find Tires → |
| TRD | 19x8.5 ET+40 | 235/40R19
Compare ⚡
| 35 / 35 PSI | Find Tires → |
🔧 Technical Service Bulletins (TSB) & Suspension Chronic Issues
1 DOCUMENTED ISSUESHesitation or harsh shifting between 2nd and 3rd gear under light throttle
Direct Shift 8-speed automatic torque converter lockup solenoid logic (Toyota TSB 0037-19)
Hub Centric Ring Finder & Vibration Eliminator
Precision adapter sizing for Toyota Camry factory 60.1 mm hub snout.
The wheel bore is +13.0 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:
OEM vs. Aftermarket Visual Stance & Poke Gauge
Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.
Printable Mechanic Spec Card & Torque Sequence
High-contrast pocket card for tire shops, track days, and garage toolboxes.
2022 Toyota Camry
fitmentspec.com/toyota/camry/2022DIRECT HUB-CENTRIC WHEEL INTERCHANGE
Vehicles sharing both the exact 5x114.3 bolt pattern and 60.1 mm hub bore.
Cross-Vehicle OEM Wheel Swap Compatibility (5x114.3)
Verified OEM donor vehicles whose factory wheels fit the Toyota Camry hub (60.1mm).
Lexus ES
Lexus IS
Lexus NX

Lexus RX
Lexus TX

Toyota Corolla Cross
Toyota Crown
Toyota GR Corolla
⚡ Will It Rub? 2D Offset & Strut Clearance
Real-time inner strut clearance and outer fender poke calculation.
WINTER WHEEL & MINUS-SIZING ADVISOR
Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.
📡 TPMS Protocol & Relearn Procedure
US OEM Sensor Protocol & Step-by-Step Calibration
🔍 Pre-Purchase Fitment & Chassis Inspection Checklist
Universal 8-Point Buyer Guide →✓ Wheel Hub & Bearing Inspection
- • Check front wheel bearing runout.
- • Verify 60.1mm hub centric rings on aftermarket wheels.
✓ Suspension & Steering Clearance
- • Inspect front strut lower perch clearance.
- • Check rear multi-link control arms.
TRD trims use larger 12.9-inch front dual-piston calipers requiring 18-inch minimum wheel clearance.
📋 One-Click Forum Spec Exporter
Export verified specs for enthusiast forums (vBulletin, XenForo, Reddit).