2023 Acura Integra
Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.
2023 Acura Integra Towing Capacity & Hitch Telemetry
Official manufacturer braked tow ratings, max tongue weight, and payload limits.
Light duty towing up to 1,000 lbs. Recommended primarily for hitch-mounted accessories (bike racks, ski racks, cargo baskets).
- • Unbraked trailer maximum limit: 350 lbs (159 kg).
- • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
- • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.
2023 Acura Integra Quick Fitment Answers
Looking for exact hub and wheel specifications for the 2023 Acura Integra? The factory bolt pattern is 5x114.3 (5-lug) with a 64.1 mm center bore. The manufacturer specified wheel lug torque is 80 ft-lbs (108 Nm) using M12x1.5 Lug Nuts with a Radius / Ball Seat (OEM Honda/Acura) - Requires 60° Conical for Aftermarket seating surface. Safe wheel offset range is +38mm to +50mm.
Factory OEM Wheel & Tire Configurations (2023)
2 TRIM OPTIONS| Trim Name | Wheel Size | Tire Specification | Placard PSI | Equipment |
|---|---|---|---|---|
| Base / Standard | 17x7 ET+50 | 215/50R17
Compare ⚡
| 33 / 32 PSI | Find Tires → |
| A-Spec / Technology | 18x8 ET+50 | 235/40R18
Compare ⚡
| 33 / 32 PSI | Find Tires → |
🔧 Technical Service Bulletins (TSB) & Suspension Chronic Issues
1 DOCUMENTED ISSUESSticky or notching sensation in steering wheel at highway speeds (55-75 mph)
Excessive friction within the EPS gearbox worm wheel spring preload mechanism (Acura Service Bulletin 23-037)
Hub Centric Ring Finder & Vibration Eliminator
Precision adapter sizing for Acura Integra factory 64.1 mm hub snout.
The wheel bore is +9.0 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:
OEM vs. Aftermarket Visual Stance & Poke Gauge
Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.
Printable Mechanic Spec Card & Torque Sequence
High-contrast pocket card for tire shops, track days, and garage toolboxes.
2023 Acura Integra
fitmentspec.com/acura/integra/2023DIRECT HUB-CENTRIC WHEEL INTERCHANGE
Vehicles sharing both the exact 5x114.3 bolt pattern and 64.1 mm hub bore.
Cross-Vehicle OEM Wheel Swap Compatibility (5x114.3)
Verified OEM donor vehicles whose factory wheels fit the Acura Integra hub (64.1mm).
Acura ILX

Acura RDX

Acura RSX

Acura TSX

Honda Accord

Honda Accord

Honda Civic
Honda Civic Si
⚡ Will It Rub? 2D Offset & Strut Clearance
Real-time inner strut clearance and outer fender poke calculation.
WINTER WHEEL & MINUS-SIZING ADVISOR
Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.
📡 TPMS Protocol & Relearn Procedure
US OEM Sensor Protocol & Step-by-Step Calibration
🔍 Pre-Purchase Fitment & Chassis Inspection Checklist
Universal 8-Point Buyer Guide →✓ Wheel Hub & Bearing Inspection
- • Check 12 and 6 o'clock hub bearing play
✓ Suspension & Steering Clearance
- • Inspect front strut clearance
Factory caliper clearance notes
📋 One-Click Forum Spec Exporter
Export verified specs for enthusiast forums (vBulletin, XenForo, Reddit).
Verified Hardware & Installation Kit for 2023 Integra
Radius / Ball Seat (OEM Honda/Acura) - Requires 60° Conical for Aftermarket seating
Eliminates wheel vibration
1/2" drive click wrench