FitmentSpec Logo
Acura logo
5th Generation (DE4) (2023–2026)

2026 Acura Integra

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2026 Acura Integra
Factory Powertrain 1.5L In-Line 4 Turbocharged VTEC
200 HP (149 kW) 192 lb-ft 1.5L Inline-4
Chassis Dimensions Exterior & Curb Weight
L: 185.8" W: 72" WB: 107.7" 3,073 – 3,150 lbs lbs
Center BoreHub Centric
64.1 mm
Hub Ring Spigot Diameter
Offset RangeET
+38 to +50
Flush Target: ET +35
Lug TorqueM12x1.5
80 ft-lbs
108 Nm • Radius Seat
Fastener: Radius / Ball Seat (OEM Honda/Acura) - Requires 60° Conical for Aftermarket Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2026 Acura Integra Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 1,000 lbs
Max Towing (Braked)
1,000 lbs
454 kg
With factory trailer brakes
Max Payload Capacity
850 lbs
386 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
100 lbs
45 kg
Maximum hitch downward load
Hitch Receiver Class
Class I (1.25-inch Receiver)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2026 Integra
Selected Load: 1,000 lbs • Vehicle Rating: 1,000 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Light duty towing up to 1,000 lbs. Recommended primarily for hitch-mounted accessories (bike racks, ski racks, cargo baskets).

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 350 lbs (159 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2026 Acura Integra Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2026 Acura Integra? The factory bolt pattern is 5x114.3 (5-lug) with a 64.1 mm center bore. The manufacturer specified wheel lug torque is 80 ft-lbs (108 Nm) using M12x1.5 Lug Nuts with a Radius / Ball Seat (OEM Honda/Acura) - Requires 60° Conical for Aftermarket seating surface. Safe wheel offset range is +38mm to +50mm.

Factory OEM Wheel & Tire Configurations (2026)

2 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
Base / Standard 17x7 ET+50
215/50R17 Compare ⚡
33 / 32 PSI Find Tires →
A-Spec / Technology 18x8 ET+50
235/40R18 Compare ⚡
33 / 32 PSI Find Tires →

🔧 Technical Service Bulletins (TSB) & Suspension Chronic Issues

1 DOCUMENTED ISSUES
Steering & Front Hub Rack Moderate Severity
Symptom

Sticky or notching sensation in steering wheel at highway speeds (55-75 mph)

Root Cause & TSB Details

Excessive friction within the EPS gearbox worm wheel spring preload mechanism (Acura Service Bulletin 23-037)

Affected Components: Electric Power Steering GearboxTie Rod EndsSteering Column Intermediate Shaft
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Acura Integra factory 64.1 mm hub snout.

Factory Hub: 64.1mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +9.0 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 64.1mm (OD: 73.1mm / ID: 64.1mm)
🛒 Order 73.1mm to 64.1mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 7" ET50
New Wheel Width:8.0" (+1.0" vs OEM)
New Wheel Offset (ET):ET40 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x114.3
2023-2026 FITMENT SPECIFICATION

2026 Acura Integra

fitmentspec.com/acura/integra/2026
FINAL TORQUE80 ft-lbs(108 Nm)
Bolt Pattern (PCD)5x114.3
Center Bore64.1 mm
Fastener & ThreadM12x1.5Lug Nut • Radius / Ball Seat (OEM Honda/Acura) - Requires 60° Conical for Aftermarket
TPMS CalibrationIndirectDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x114.3 bolt pattern and 64.1 mm hub bore.

✓ No Centering Rings Required
2013-202264.1 mm CB
Acura ILX
Torque: 80 ft-lbsSpecs →
2019-202664.1 mm CB
Acura RDX
Torque: 80 ft-lbsSpecs →
2002-200664.1 mm CB
Acura RSX
Torque: 80 ft-lbsSpecs →
2004-201464.1 mm CB
Acura TSX
Torque: 80 ft-lbsSpecs →
2018-202264.1 mm CB
Honda Accord
Torque: 80 ft-lbsSpecs →
2023-202664.1 mm CB
Honda Accord
Torque: 80 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +7.24" (+28.45%)
+28.45%
Original Baseline Tire215/50R17
New Target Tire285/70R17
QUICK SIZES:
25.5"32.7"
Speedometer Variance Table
30 mph gauge38.5 actual+8.5 mph
45 mph gauge57.8 actual+12.8 mph
60 mph gauge77.1 actual+17.1 mph
70 mph gauge89.9 actual+19.9 mph
80 mph gauge102.8 actual+22.8 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
205/55R16
Mounted on 16x6.5" Wheel
PCD: 5x114.3
Center Bore: 64.1 mm
🛡️ Technical Benefits for 2026 Acura Integra
⛷️ Higher Ground Pressure
A narrower tire (205mm vs 215mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+5% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

INDIRECT TPMSABS Wheel Speed Based
Architecture
Indirect Wheel Speed ABS
Sensor Part Number
N/A (ABS Sensor)
Relearn Protocol
Cluster-Reset
Relearn Sequence0 / 2 Steps Complete
1
Inflate cold tires to door placard pressure.
2
Drive for 15 minutes above 20 mph.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →

🔍 Pre-Purchase Fitment & Chassis Inspection Checklist

Universal 8-Point Buyer Guide →

✓ Wheel Hub & Bearing Inspection

  • • Check 12 and 6 o'clock hub bearing play

✓ Suspension & Steering Clearance

  • • Inspect front strut clearance
Brake Caliper Clearance Note

Factory caliper clearance notes

Common Wear Replacement Parts

📋 One-Click Forum Spec Exporter

Export verified specs for enthusiast forums (vBulletin, XenForo, Reddit).

🔩

Verified Hardware & Installation Kit for 2026 Integra

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2026 Acura Integra)

8 Verified Q&As
Q What is the bolt pattern for a 2026 Acura Integra?
The factory bolt pattern (PCD) for the 2026 Acura Integra is 5x114.3 (5-lug configuration) with a pitch circle diameter of 114.3 mm. Center bore hub diameter is 64.1 mm.
Q What is the wheel lug torque specification for a 2026 Acura Integra?
The official factory wheel lug torque specification for the 2026 Acura Integra is 80 ft-lbs (108 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2026 Acura Integra?
The official maximum braked towing capacity for the 2026 Acura Integra is 1,000 lbs (454 kg) with a maximum tongue weight limit of 100 lbs. Recommended hitch receiver: Class I (1.25-inch Receiver). Unbraked trailer limit is 350 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2026 Acura Integra?
Factory stock tire sizing for the 2026 Acura Integra is 215/50R17 with a recommended cold tire pressure of 33 PSI front and 32 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2026 Acura Integra and are hub centric rings needed?
The center bore diameter is exactly 64.1 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 64.1mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2026 Acura Integra use?
The 2026 Acura Integra utilizes M12x1.5 Lug Nuts with a Radius / Ball Seat (OEM Honda/Acura) - Requires 60° Conical for Aftermarket seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2026 Acura Integra have Direct or Indirect TPMS and how is it reset?
It uses an Indirect TPMS system that calculates relative pressure by monitoring individual wheel rotation speeds via the ABS wheel speed sensors. Reset procedure: Cluster-Reset.
Q What aftermarket wheel offset and tire sizes fit a 2026 Acura Integra without rubbing?
For an aggressive yet flush aesthetic without fender rolling or rubbing, the recommended setup is 18x8.5 ET40 wheels with 245/40R18 tires. For a 100% rub-free conservative upgrade, choose 18x8.0 ET45 with 235/45R18. Factory safe offset range spans +38mm to +50mm.