FitmentSpec Logo
Ford logo
6th Gen (U725) (2021–2026)

2021 Ford Bronco

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2021 Ford Bronco
Factory Powertrain 2.7L EcoBoost Twin-Turbo V6
315 HP (235 kW) 410 lb-ft 2.7L V6
Chassis Dimensions Exterior & Curb Weight
L: 189.4" W: 75.9" WB: 116.1" 4,499 – 5,320 lbs lbs
Center BoreHub Centric
93.1 mm
Hub Ring Spigot Diameter
Offset RangeET
+20 to +55
Flush Target: ET +30
Lug TorqueM12x1.5
100 ft-lbs
135 Nm • Conical Seat
Fastener: Conical 60° Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2021 Ford Bronco Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 4,500 lbs
Max Towing (Braked)
4,500 lbs
2,041 kg
With factory trailer brakes
Max Payload Capacity
1,370 lbs
621 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
450 lbs
204 kg
Maximum hitch downward load
Hitch Receiver Class
Class II/III (2-inch Receiver)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2021 Bronco
Selected Load: 4,500 lbs • Vehicle Rating: 4,500 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Bronco Raptor rated at 4,500 lbs; 2-door and 4-door models with 2.3L/2.7L EcoBoost and Towing Capability Package rated at 3,500 lbs.

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 1500 lbs (680 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2021 Ford Bronco Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2021 Ford Bronco? The factory bolt pattern is 6x139.7 (6-lug) with a 93.1 mm center bore. The manufacturer specified wheel lug torque is 100 ft-lbs (135 Nm) using M12x1.5 Lug Nuts with a Conical 60° seating surface. Safe wheel offset range is +20mm to +55mm.

Factory OEM Wheel & Tire Configurations (2021)

2 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
Base / Big Bend 17x7.5 ET+55
255/75R17 Compare ⚡
35 / 35 PSI Find Tires →
Sasquatch Package 17x8.5 ET+30
315/70R17 Compare ⚡
39 / 39 PSI Find Tires →

🔧 Technical Service Bulletins (TSB) & Suspension Chronic Issues

1 DOCUMENTED ISSUES
Front Steering Rack & Tie Rods High Severity
Symptom

Snapping or bending of inner/outer tie rods under off-road articulation with 35+ inch tires

Root Cause & TSB Details

Cast aluminum steering gear housing and standard-duty tie rods under extreme rock crawl loads (Ford TSB 22-2144)

Affected Components: Steering Gear RackInner Tie RodsCast Cleat Housing
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Ford Bronco factory 93.1 mm hub snout.

Factory Hub: 93.1mm
Hub Diagnostic Result
🚨 INCOMPATIBLE WHEEL BORE (TOO SMALL)

The wheel bore (73.1 mm) is smaller than the car hub (93.1 mm). The wheel will NOT physically seat flush on the hub face without wheel spacers or center-bore machining.

💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 7.5" ET55
New Wheel Width:8.5" (+1.0" vs OEM)
New Wheel Offset (ET):ET45 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

6x139.7
2021-2026 FITMENT SPECIFICATION

2021 Ford Bronco

fitmentspec.com/ford/bronco/2021
FINAL TORQUE100 ft-lbs(135 Nm)
Bolt Pattern (PCD)6x139.7
Center Bore93.1 mm
Fastener & ThreadM12x1.5Lug Nut • Conical 60°
TPMS CalibrationDirectDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 6x139.7 bolt pattern and 93.1 mm hub bore.

✓ No Centering Rings Required
2022-202693.1 mm CB
Ford Bronco Raptor
Torque: 100 ft-lbsSpecs →
2024-202693.1 mm CB
Ford Ranger
Torque: 100 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Within Normal ToleranceDiameter: +0.65" (+2.03%)
+2.03%
Original Baseline Tire255/75R17
New Target Tire285/70R17
QUICK SIZES:
32.1"32.7"
Speedometer Variance Table
30 mph gauge30.6 actual+0.6 mph
45 mph gauge45.9 actual+0.9 mph
60 mph gauge61.2 actual+1.2 mph
70 mph gauge71.4 actual+1.4 mph
80 mph gauge81.6 actual+1.6 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
245/80R16
Mounted on 16x6.5" Wheel
PCD: 6x139.7
Center Bore: 93.1 mm
🛡️ Technical Benefits for 2021 Ford Bronco
⛷️ Higher Ground Pressure
A narrower tire (245mm vs 255mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+5% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TPMS315 MHz
Architecture
Direct Valve Stem Transducer
Sensor Part Number
N/A (ABS Sensor)
Relearn Protocol
Drive-Cycle
Relearn Sequence0 / 3 Steps Complete
1
Inflate all tires to placard PSI
2
Drive above 20 mph for 10-15 minutes continuously
3
Sensors auto-learn positions
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →

🔍 Pre-Purchase Fitment & Chassis Inspection Checklist

Universal 8-Point Buyer Guide →

✓ Wheel Hub & Bearing Inspection

  • • Check 93.1mm front wheel hub bearings for play after running negative offset wheels.
  • • Inspect axle halfshaft CV boots for tears.

✓ Suspension & Steering Clearance

  • • Verify front crash bars are intact or properly removed if running 35-inch tires.
  • • Check rear track bar bracket.
Brake Caliper Clearance Note

Standard 17-inch wheels clear calipers; certain 16-inch aftermarket rims contact the front tie-rod end and caliper.

Common Wear Replacement Parts

📋 One-Click Forum Spec Exporter

Export verified specs for enthusiast forums (vBulletin, XenForo, Reddit).

🔩

Verified Hardware & Installation Kit for 2021 Bronco

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2021 Ford Bronco)

8 Verified Q&As
Q What is the bolt pattern for a 2021 Ford Bronco?
The factory bolt pattern (PCD) for the 2021 Ford Bronco is 6x139.7 (6-lug configuration) with a pitch circle diameter of 139.7 mm. Center bore hub diameter is 93.1 mm.
Q What is the wheel lug torque specification for a 2021 Ford Bronco?
The official factory wheel lug torque specification for the 2021 Ford Bronco is 100 ft-lbs (135 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2021 Ford Bronco?
The official maximum braked towing capacity for the 2021 Ford Bronco is 4,500 lbs (2,041 kg) with a maximum tongue weight limit of 450 lbs. Recommended hitch receiver: Class II/III (2-inch Receiver). Unbraked trailer limit is 1,500 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2021 Ford Bronco?
Factory stock tire sizing for the 2021 Ford Bronco is 255/75R17 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2021 Ford Bronco and are hub centric rings needed?
The center bore diameter is exactly 93.1 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 93.1mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2021 Ford Bronco use?
The 2021 Ford Bronco utilizes M12x1.5 Lug Nuts with a Conical 60° seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2021 Ford Bronco have Direct or Indirect TPMS and how is it reset?
It features a Direct TPMS system utilizing physical valve-stem pressure sensors operating at 315 MHz. The relearn protocol is Drive-Cycle: Inflate all tires to placard PSI
Q What aftermarket wheel offset and tire sizes fit a 2021 Ford Bronco without rubbing?
For an aggressive yet flush aesthetic without fender rolling or rubbing, the recommended setup is 17x8.5 ET+0 wheels with 315/70R17 (35s) tires. For a 100% rub-free conservative upgrade, choose 17x8.5 ET+30 with 285/70R17. Factory safe offset range spans +20mm to +55mm.