FitmentSpec Logo
Ford logo
U625 (4th Gen Facelift) (2022–2026)

2022 Ford Expedition

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2022 Ford Expedition
Factory Powertrain 3.5L EcoBoost Twin-Turbo V6 (High-Output 440 HP on Timberline)
400 HP (298 kW) 480 lb-ft 3.5L V6 Twin-Turbo
Chassis Dimensions Exterior & Curb Weight
L: 210" W: 79.9" WB: 122.5" 5,368 - 5,623 lbs lbs
Bolt Pattern6-Lug
6x135
Center BoreHub Centric
87.1 mm
Hub Ring Spigot Diameter
Offset RangeET
+25 to +44
Flush Target: ET +25
Lug TorqueM14 x 1.5
150 ft-lbs
204 Nm • Conical Seat
Fastener: Conical 60 Degree Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2022 Ford Expedition Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 9,300 lbs
Max Towing (Braked)
9,300 lbs
4,218 kg
With factory trailer brakes
Max Payload Capacity
1,757 lbs
797 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
930 lbs
422 kg
Maximum hitch downward load
Hitch Receiver Class
Class IV (2-inch Receiver)
Weight distribution rated
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2022 Expedition
Selected Load: 9,300 lbs • Vehicle Rating: 9,300 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Standard wheelbase 4x2 models with Heavy-Duty Trailer Tow Package (536) achieve maximum 9,300 lbs; 4x4 models rated at 9,200 lbs.

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 1500 lbs (680 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2022 Ford Expedition Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2022 Ford Expedition? The factory bolt pattern is 6x135 (6-lug) with a 87.1 mm center bore. The manufacturer specified wheel lug torque is 150 ft-lbs (204 Nm) using M14 x 1.5 Lug Nuts with a Conical 60 Degree seating surface. Safe wheel offset range is +25mm to +44mm.

Factory OEM Wheel & Tire Configurations (2022)

2 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
XLT / Timberline (18" 33" AT) 18x8.5 ET+44
275/65R18 (33" Goodyear Wrangler) Compare ⚡
35 PSI Find Tires →
Limited / King Ranch / Platinum (22" Polished) 22x9.5 ET+44
285/45R22 Compare ⚡
35 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Ford Expedition factory 87.1 mm hub snout.

Factory Hub: 87.1mm
Hub Diagnostic Result
🚨 INCOMPATIBLE WHEEL BORE (TOO SMALL)

The wheel bore (73.1 mm) is smaller than the car hub (87.1 mm). The wheel will NOT physically seat flush on the hub face without wheel spacers or center-bore machining.

💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 8.5" ET44
New Wheel Width:9.5" (+1.0" vs OEM)
New Wheel Offset (ET):ET34 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

6x135
2022-2026 FITMENT SPECIFICATION

2022 Ford Expedition

fitmentspec.com/ford/expedition/2022
FINAL TORQUE150 ft-lbs(204 Nm)
Bolt Pattern (PCD)6x135
Center Bore87.1 mm
Fastener & ThreadM14 x 1.5Lug Nut • Conical 60 Degree
TPMS CalibrationDirect Tire Pressure SensorDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 6x135 bolt pattern and 87.1 mm hub bore.

✓ No Centering Rings Required
2021-202687.1 mm CB
Ford F-150
Torque: 150 ft-lbsSpecs →
2018-202687.1 mm CB
Lincoln Navigator
Torque: 150 ft-lbsSpecs →
🔄

Cross-Vehicle OEM Wheel Swap Compatibility (6x135)

Verified OEM donor vehicles whose factory wheels fit the Ford Expedition hub (87.1mm).

Wheel Swap Calculator →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Within Normal ToleranceDiameter: +0.63" (+1.98%)
+1.98%
Original Baseline Tire275/65R18
New Target Tire285/70R17
QUICK SIZES:
32.1"32.7"
Speedometer Variance Table
30 mph gauge30.6 actual+0.6 mph
45 mph gauge45.9 actual+0.9 mph
60 mph gauge61.2 actual+1.2 mph
70 mph gauge71.4 actual+1.4 mph
80 mph gauge81.6 actual+1.6 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
265/70R17
Mounted on 17x7.5" Wheel
PCD: 6x135
Center Bore: 87.1 mm
🛡️ Technical Benefits for 2022 Ford Expedition
⛷️ Higher Ground Pressure
A narrower tire (265mm vs 275mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+5% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TIRE PRESSURE SENSOR TPMS315 MHz
Architecture
Indirect Wheel Speed ABS
Sensor Part Number
F2GZ-1A189-A
Relearn Protocol
Key Sequence / Tool
Relearn Sequence0 / 1 Steps Complete
1
Ensure 35 PSI cold. Cycle ignition 3 times ending in RUN, tap brake, cycle 3 times ending in RUN. Horn chirps. Trigger LF, RF, RR, LR sensors.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2022 Expedition

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2022 Ford Expedition)

8 Verified Q&As
Q What is the bolt pattern for a 2022 Ford Expedition?
The factory bolt pattern (PCD) for the 2022 Ford Expedition is 6x135 (6-lug configuration) with a pitch circle diameter of 135 mm. Center bore hub diameter is 87.1 mm.
Q What is the wheel lug torque specification for a 2022 Ford Expedition?
The official factory wheel lug torque specification for the 2022 Ford Expedition is 150 ft-lbs (204 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2022 Ford Expedition?
The official maximum braked towing capacity for the 2022 Ford Expedition is 9,300 lbs (4,218 kg) with a maximum tongue weight limit of 930 lbs. Recommended hitch receiver: Class IV (2-inch Receiver). Unbraked trailer limit is 1,500 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2022 Ford Expedition?
Factory stock tire sizing for the 2022 Ford Expedition is 275/65R18 (33" Goodyear Wrangler) with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2022 Ford Expedition and are hub centric rings needed?
The center bore diameter is exactly 87.1 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 87.1mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2022 Ford Expedition use?
The 2022 Ford Expedition utilizes M14 x 1.5 Lug Nuts with a Conical 60 Degree seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2022 Ford Expedition have Direct or Indirect TPMS and how is it reset?
This vehicle utilizes standard valve stems without requiring active electronic TPMS sensor recalibration.
Q What aftermarket wheel offset and tire sizes fit a 2022 Ford Expedition without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +25mm and +44mm with a flush target of ET +25. Always test clearance at full steering lock.