2026 Ford F-150
Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.
2026 Ford F-150 Towing Capacity & Hitch Telemetry
Official manufacturer braked tow ratings, max tongue weight, and payload limits.
Maximum 14,000 lbs rating requires 3.5L EcoBoost V6, Max Trailer Tow Package (53C), and 20-inch factory wheels with 3.73 rear axle.
- • Unbraked trailer maximum limit: 1500 lbs (680 kg).
- • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
- • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.
2026 Ford F-150 Quick Fitment Answers
Looking for exact hub and wheel specifications for the 2026 Ford F-150? The factory bolt pattern is 6x135 (6-lug) with a 87.1 mm center bore. The manufacturer specified wheel lug torque is 150 ft-lbs (204 Nm) using M14x1.5 Lug Nuts with a Conical 60° (XL Heavy Duty Taper) seating surface. Safe wheel offset range is +18mm to +44mm.
Factory OEM Wheel & Tire Configurations (2026)
2 TRIM OPTIONS| Trim Name | Wheel Size | Tire Specification | Placard PSI | Equipment |
|---|---|---|---|---|
| XL / XLT 17-inch | 17x7.5 ET+44 | 245/70R17
Compare ⚡
| 35 / 35 PSI | Find Tires → |
| Lariat / Platinum 20-inch | 20x8.5 ET+44 | 275/60R20
Compare ⚡
| 35 / 35 PSI | Find Tires → |
🔧 Technical Service Bulletins (TSB) & Suspension Chronic Issues
2 DOCUMENTED ISSUESRattling noise in rear hub area; sheared bolt head found inside wheel center cap
Rear axle hub bolt fatigue fracture under high payload/towing on 3/4-floating axle configurations (Ford Recall 23S65 / TSB 22-2321)
Buzzing, ratcheting, or grinding noise from front hubs during acceleration in 2WD mode
Partial engagement of Integrated Wheel Ends (IWE) caused by vacuum solenoid valve check-valve degradation (Ford TSB 20-2307)
Hub Centric Ring Finder & Vibration Eliminator
Precision adapter sizing for Ford F-150 factory 87.1 mm hub snout.
The wheel bore (73.1 mm) is smaller than the car hub (87.1 mm). The wheel will NOT physically seat flush on the hub face without wheel spacers or center-bore machining.
OEM vs. Aftermarket Visual Stance & Poke Gauge
Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.
Printable Mechanic Spec Card & Torque Sequence
High-contrast pocket card for tire shops, track days, and garage toolboxes.