FitmentSpec Logo
Ford logo
14th Generation (P702) (2021–2026)

2025 Ford F-150

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2025 Ford F-150
Factory Powertrain 3.5L EcoBoost Twin-Turbocharged V6
400 HP (298 kW) 500 lb-ft 3.5L V6
Chassis Dimensions Exterior & Curb Weight
L: 231.7" W: 79.9" WB: 145.4" 4,705 – 5,540 lbs lbs
Bolt Pattern6-Lug
6x135
Center BoreHub Centric
87.1 mm
Hub Ring Spigot Diameter
Offset RangeET
+18 to +44
Flush Target: ET +0
Lug TorqueM14x1.5
150 ft-lbs
204 Nm • Conical Seat
Fastener: Conical 60° (XL Heavy Duty Taper) Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2025 Ford F-150 Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 14,000 lbs
Max Towing (Braked)
14,000 lbs
6,350 kg
With factory trailer brakes
Max Payload Capacity
3,325 lbs
1,508 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
1,400 lbs
635 kg
Maximum hitch downward load
Hitch Receiver Class
Class IV (2-inch Receiver)
Weight distribution rated
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2025 F-150
Selected Load: 14,000 lbs • Vehicle Rating: 14,000 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Maximum 14,000 lbs rating requires 3.5L EcoBoost V6, Max Trailer Tow Package (53C), and 20-inch factory wheels with 3.73 rear axle.

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 1500 lbs (680 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2025 Ford F-150 Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2025 Ford F-150? The factory bolt pattern is 6x135 (6-lug) with a 87.1 mm center bore. The manufacturer specified wheel lug torque is 150 ft-lbs (204 Nm) using M14x1.5 Lug Nuts with a Conical 60° (XL Heavy Duty Taper) seating surface. Safe wheel offset range is +18mm to +44mm.

Factory OEM Wheel & Tire Configurations (2025)

2 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
XL / XLT 17-inch 17x7.5 ET+44
245/70R17 Compare ⚡
35 / 35 PSI Find Tires →
Lariat / Platinum 20-inch 20x8.5 ET+44
275/60R20 Compare ⚡
35 / 35 PSI Find Tires →

🔧 Technical Service Bulletins (TSB) & Suspension Chronic Issues

2 DOCUMENTED ISSUES
Rear Axle & Hub Assembly Critical Severity
Symptom

Rattling noise in rear hub area; sheared bolt head found inside wheel center cap

Root Cause & TSB Details

Rear axle hub bolt fatigue fracture under high payload/towing on 3/4-floating axle configurations (Ford Recall 23S65 / TSB 22-2321)

Affected Components: Rear Axle Shaft Hub BoltRear Hub Flange AssemblyPark Brake Rotor Assembly
Front 4WD Hub Actuator (IWE) Moderate Severity
Symptom

Buzzing, ratcheting, or grinding noise from front hubs during acceleration in 2WD mode

Root Cause & TSB Details

Partial engagement of Integrated Wheel Ends (IWE) caused by vacuum solenoid valve check-valve degradation (Ford TSB 20-2307)

Affected Components: IWE Hub ActuatorsVacuum Check Valve SolenoidFront Halfshaft Splines
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Ford F-150 factory 87.1 mm hub snout.

Factory Hub: 87.1mm
Hub Diagnostic Result
🚨 INCOMPATIBLE WHEEL BORE (TOO SMALL)

The wheel bore (73.1 mm) is smaller than the car hub (87.1 mm). The wheel will NOT physically seat flush on the hub face without wheel spacers or center-bore machining.

💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 7.5" ET44
New Wheel Width:8.5" (+1.0" vs OEM)
New Wheel Offset (ET):ET34 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

6x135
2021-2026 FITMENT SPECIFICATION

2025 Ford F-150

fitmentspec.com/ford/f-150/2025
FINAL TORQUE150 ft-lbs(204 Nm)
Bolt Pattern (PCD)6x135
Center Bore87.1 mm
Fastener & ThreadM14x1.5Lug Nut • Conical 60° (XL Heavy Duty Taper)
TPMS CalibrationDirectDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 6x135 bolt pattern and 87.1 mm hub bore.

✓ No Centering Rings Required
2018-202687.1 mm CB
Ford Expedition
Torque: 150 ft-lbsSpecs →
2022-202687.1 mm CB
Ford Expedition
Torque: 150 ft-lbsSpecs →
2018-202687.1 mm CB
Lincoln Navigator
Torque: 150 ft-lbsSpecs →
🔄

Cross-Vehicle OEM Wheel Swap Compatibility (6x135)

Verified OEM donor vehicles whose factory wheels fit the Ford F-150 hub (87.1mm).

Wheel Swap Calculator →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +2.20" (+7.23%)
+7.23%
Original Baseline Tire245/70R17
New Target Tire285/70R17
QUICK SIZES:
30.5"32.7"
Speedometer Variance Table
30 mph gauge32.2 actual+2.2 mph
45 mph gauge48.3 actual+3.3 mph
60 mph gauge64.3 actual+4.3 mph
70 mph gauge75.1 actual+5.1 mph
80 mph gauge85.8 actual+5.8 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
235/75R16
Mounted on 16x6.5" Wheel
PCD: 6x135
Center Bore: 87.1 mm
🛡️ Technical Benefits for 2025 Ford F-150
⛷️ Higher Ground Pressure
A narrower tire (235mm vs 245mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+5% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TPMS315 MHz
Architecture
Direct Valve Stem Transducer
Sensor Part Number
TPMS-35 / F2GZ-1A189-A
Relearn Protocol
Drive-Cycle
Relearn Sequence0 / 2 Steps Complete
1
Inflate cold tires to door placard pressure.
2
Drive for 15 minutes above 20 mph.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →

🔍 Pre-Purchase Fitment & Chassis Inspection Checklist

Universal 8-Point Buyer Guide →

✓ Wheel Hub & Bearing Inspection

  • • Check 12 and 6 o'clock hub bearing play

✓ Suspension & Steering Clearance

  • • Inspect front strut clearance
Brake Caliper Clearance Note

Factory caliper clearance notes

Common Wear Replacement Parts

📋 One-Click Forum Spec Exporter

Export verified specs for enthusiast forums (vBulletin, XenForo, Reddit).

🔩

Verified Hardware & Installation Kit for 2025 F-150

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2025 Ford F-150)

8 Verified Q&As
Q What is the bolt pattern for a 2025 Ford F-150?
The factory bolt pattern (PCD) for the 2025 Ford F-150 is 6x135 (6-lug configuration) with a pitch circle diameter of 135 mm. Center bore hub diameter is 87.1 mm.
Q What is the wheel lug torque specification for a 2025 Ford F-150?
The official factory wheel lug torque specification for the 2025 Ford F-150 is 150 ft-lbs (204 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2025 Ford F-150?
The official maximum braked towing capacity for the 2025 Ford F-150 is 14,000 lbs (6,350 kg) with a maximum tongue weight limit of 1,400 lbs. Recommended hitch receiver: Class IV (2-inch Receiver). Unbraked trailer limit is 1,500 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2025 Ford F-150?
Factory stock tire sizing for the 2025 Ford F-150 is 245/70R17 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2025 Ford F-150 and are hub centric rings needed?
The center bore diameter is exactly 87.1 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 87.1mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2025 Ford F-150 use?
The 2025 Ford F-150 utilizes M14x1.5 Lug Nuts with a Conical 60° (XL Heavy Duty Taper) seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2025 Ford F-150 have Direct or Indirect TPMS and how is it reset?
It features a Direct TPMS system utilizing physical valve-stem pressure sensors operating at 315 MHz. The relearn protocol is Drive-Cycle: Inflate cold tires to door placard pressure.
Q What aftermarket wheel offset and tire sizes fit a 2025 Ford F-150 without rubbing?
For an aggressive yet flush aesthetic without fender rolling or rubbing, the recommended setup is 18x8.5 ET40 wheels with 245/40R18 tires. For a 100% rub-free conservative upgrade, choose 18x8.0 ET45 with 235/45R18. Factory safe offset range spans +18mm to +44mm.