2024 Ford Explorer
Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.
2024 Ford Explorer Towing Capacity & Hitch Telemetry
Official manufacturer braked tow ratings, max tongue weight, and payload limits.
Class III Trailer Tow Package standard or optional on 2.3L EcoBoost (5,300 lbs) and 3.0L Twin-Turbo EcoBoost V6 (5,600 lbs).
- • Unbraked trailer maximum limit: 1500 lbs (680 kg).
- • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
- • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.
2024 Ford Explorer Quick Fitment Answers
Looking for exact hub and wheel specifications for the 2024 Ford Explorer? The factory bolt pattern is 5x114.3 (5-lug) with a 70.5 mm center bore. The manufacturer specified wheel lug torque is 150 ft-lbs (204 Nm) using M14x1.5 Lug Nuts with a Conical 60° seating surface. Safe wheel offset range is +30mm to +45mm.
Factory OEM Wheel & Tire Configurations (2024)
2 TRIM OPTIONS| Trim Name | Wheel Size | Tire Specification | Placard PSI | Equipment |
|---|---|---|---|---|
| XLT / Limited | 20x8.5 ET+37.5 | 255/55R20
Compare ⚡
| 33 / 33 PSI | Find Tires → |
| ST (High Performance) | 21x9 ET+37.5 | 275/45R21
Compare ⚡
| 36 / 36 PSI | Find Tires → |
🔧 Technical Service Bulletins (TSB) & Suspension Chronic Issues
1 DOCUMENTED ISSUESClunking sensation from rear during sudden acceleration or reverse gear engagement
Single rear differential mounting bolt shearing under extreme launch torque on EcoBoost models (Ford Recall 22S27 / 23V-199)
Hub Centric Ring Finder & Vibration Eliminator
Precision adapter sizing for Ford Explorer factory 70.5 mm hub snout.
The wheel bore is +2.6 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:
OEM vs. Aftermarket Visual Stance & Poke Gauge
Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.
Printable Mechanic Spec Card & Torque Sequence
High-contrast pocket card for tire shops, track days, and garage toolboxes.
2024 Ford Explorer
fitmentspec.com/ford/explorer/2024DIRECT HUB-CENTRIC WHEEL INTERCHANGE
Vehicles sharing both the exact 5x114.3 bolt pattern and 70.5 mm hub bore.
Cross-Vehicle OEM Wheel Swap Compatibility (5x114.3)
Verified OEM donor vehicles whose factory wheels fit the Ford Explorer hub (70.5mm).

Ford Mustang
Lincoln Aviator
Acura ILX

Acura Integra

Acura RDX

Acura RSX

Acura TSX

Alfa Romeo 8C Competizione
⚡ Will It Rub? 2D Offset & Strut Clearance
Real-time inner strut clearance and outer fender poke calculation.
WINTER WHEEL & MINUS-SIZING ADVISOR
Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.
📡 TPMS Protocol & Relearn Procedure
US OEM Sensor Protocol & Step-by-Step Calibration
🔍 Pre-Purchase Fitment & Chassis Inspection Checklist
Universal 8-Point Buyer Guide →✓ Wheel Hub & Bearing Inspection
- • Inspect 70.5mm center bore hub snout for corrosion.
- • Check wheel hub runout.
✓ Suspension & Steering Clearance
- • Inspect rear differential mounting bolt upgrade status under vehicle.
- • Check front stabilizer bar bushings.
Explorer ST Street Pack features red dual-piston calipers requiring 20-inch minimum wheel diameter.
📋 One-Click Forum Spec Exporter
Export verified specs for enthusiast forums (vBulletin, XenForo, Reddit).