FitmentSpec Logo
Ford logo
7th Gen (S650) (2024–2026)

2025 Ford Mustang

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2025 Ford Mustang
Factory Powertrain 5.0L Coyote Gen 4 V8 (Dark Horse)
500 HP (373 kW) 418 lb-ft 5.0L V8
Chassis Dimensions Exterior & Curb Weight
L: 189.4" W: 75.4" WB: 107" 3,827 – 3,993 lbs lbs
Center BoreHub Centric
70.5 mm
Hub Ring Spigot Diameter
Offset RangeET
+35 to +52.5
Flush Target: ET +30
Lug TorqueM14x1.5
150 ft-lbs
204 Nm • Conical Seat
Fastener: Conical 60° Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2025 Ford Mustang Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 1,000 lbs
Max Towing (Braked)
1,000 lbs
454 kg
With factory trailer brakes
Max Payload Capacity
850 lbs
386 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
100 lbs
45 kg
Maximum hitch downward load
Hitch Receiver Class
Class I (1.25-inch Receiver)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2025 Mustang
Selected Load: 1,000 lbs • Vehicle Rating: 1,000 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Light duty towing up to 1,000 lbs. Recommended primarily for hitch-mounted accessories (bike racks, ski racks, cargo baskets).

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 350 lbs (159 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2025 Ford Mustang Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2025 Ford Mustang? The factory bolt pattern is 5x114.3 (5-lug) with a 70.5 mm center bore. The manufacturer specified wheel lug torque is 150 ft-lbs (204 Nm) using M14x1.5 Lug Nuts with a Conical 60° seating surface. Safe wheel offset range is +35mm to +52.5mm.

Factory OEM Wheel & Tire Configurations (2025)

2 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
EcoBoost Base 18x8 ET+40
235/50R18 Compare ⚡
32 / 32 PSI Find Tires →
GT Performance Pack 19x9 ET+45
255/40R19 Compare ⚡
35 / 35 PSI Find Tires →

🔧 Technical Service Bulletins (TSB) & Suspension Chronic Issues

1 DOCUMENTED ISSUES
Front Sway Bar & End Links Moderate Severity
Symptom

Sharp metallic popping or clunking noise over driveway curbs and low-speed road imperfections

Root Cause & TSB Details

Factory stabilizer bar end-link lower flange nut under-torqued during initial assembly, inducing ball joint socket play

Affected Components: Front Stabilizer End LinksSway Bar Bushing BracketsLower Strut Cleat Mount
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Ford Mustang factory 70.5 mm hub snout.

Factory Hub: 70.5mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +2.6 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 70.5mm (OD: 73.1mm / ID: 70.5mm)
🛒 Order 73.1mm to 70.5mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 8" ET40
New Wheel Width:9.0" (+1.0" vs OEM)
New Wheel Offset (ET):ET30 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x114.3
2024-2026 FITMENT SPECIFICATION

2025 Ford Mustang

fitmentspec.com/ford/mustang/2025
FINAL TORQUE150 ft-lbs(204 Nm)
Bolt Pattern (PCD)5x114.3
Center Bore70.5 mm
Fastener & ThreadM14x1.5Lug Nut • Conical 60°
TPMS CalibrationDirectDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x114.3 bolt pattern and 70.5 mm hub bore.

✓ No Centering Rings Required
2020-202670.5 mm CB
Ford Explorer
Torque: 150 ft-lbsSpecs →
2020-202670.5 mm CB
Lincoln Aviator
Torque: 150 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +5.46" (+20.02%)
+20.02%
Original Baseline Tire235/50R18
New Target Tire285/70R17
QUICK SIZES:
27.3"32.7"
Speedometer Variance Table
30 mph gauge36.0 actual+6.0 mph
45 mph gauge54.0 actual+9.0 mph
60 mph gauge72.0 actual+12.0 mph
70 mph gauge84.0 actual+14.0 mph
80 mph gauge96.0 actual+16.0 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
225/55R17
Mounted on 17x7.0" Wheel
PCD: 5x114.3
Center Bore: 70.5 mm
🛡️ Technical Benefits for 2025 Ford Mustang
⛷️ Higher Ground Pressure
A narrower tire (225mm vs 235mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+5% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TPMS315 MHz
Architecture
Direct Valve Stem Transducer
Sensor Part Number
Ford 315MHz
Relearn Protocol
Drive-Cycle
Relearn Sequence0 / 2 Steps Complete
1
Inflate cold tires to door placard pressure.
2
Drive for 15 minutes above 20 mph.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →

🔍 Pre-Purchase Fitment & Chassis Inspection Checklist

Universal 8-Point Buyer Guide →

✓ Wheel Hub & Bearing Inspection

  • • Check 12 and 6 o'clock hub bearing play

✓ Suspension & Steering Clearance

  • • Inspect front strut clearance
Brake Caliper Clearance Note

Factory caliper clearance notes

Common Wear Replacement Parts

📋 One-Click Forum Spec Exporter

Export verified specs for enthusiast forums (vBulletin, XenForo, Reddit).

🔩

Verified Hardware & Installation Kit for 2025 Mustang

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2025 Ford Mustang)

8 Verified Q&As
Q What is the bolt pattern for a 2025 Ford Mustang?
The factory bolt pattern (PCD) for the 2025 Ford Mustang is 5x114.3 (5-lug configuration) with a pitch circle diameter of 114.3 mm. Center bore hub diameter is 70.5 mm.
Q What is the wheel lug torque specification for a 2025 Ford Mustang?
The official factory wheel lug torque specification for the 2025 Ford Mustang is 150 ft-lbs (204 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2025 Ford Mustang?
The official maximum braked towing capacity for the 2025 Ford Mustang is 1,000 lbs (454 kg) with a maximum tongue weight limit of 100 lbs. Recommended hitch receiver: Class I (1.25-inch Receiver). Unbraked trailer limit is 350 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2025 Ford Mustang?
Factory stock tire sizing for the 2025 Ford Mustang is 235/50R18 with a recommended cold tire pressure of 32 PSI front and 32 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2025 Ford Mustang and are hub centric rings needed?
The center bore diameter is exactly 70.5 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 70.5mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2025 Ford Mustang use?
The 2025 Ford Mustang utilizes M14x1.5 Lug Nuts with a Conical 60° seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2025 Ford Mustang have Direct or Indirect TPMS and how is it reset?
It features a Direct TPMS system utilizing physical valve-stem pressure sensors operating at 315 MHz. The relearn protocol is Drive-Cycle: Inflate cold tires to door placard pressure.
Q What aftermarket wheel offset and tire sizes fit a 2025 Ford Mustang without rubbing?
For an aggressive yet flush aesthetic without fender rolling or rubbing, the recommended setup is 18x8.5 ET40 wheels with 245/40R18 tires. For a 100% rub-free conservative upgrade, choose 18x8.0 ET45 with 235/45R18. Factory safe offset range spans +35mm to +52.5mm.