FitmentSpec Logo
Jeep logo
JT (1st Gen) (2020–2026)

2025 Jeep Gladiator

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2025 Jeep Gladiator
Factory Powertrain 3.6L Pentastar V6 with Stop/Start
285 HP (213 kW) 260 lb-ft 3.6L V6
Chassis Dimensions Exterior & Curb Weight
L: 218" W: 73.8" WB: 137.3" 4,650 - 5,050 lbs lbs
Bolt Pattern5-Lug
5x127
Center BoreHub Centric
71.5 mm
Hub Ring Spigot Diameter
Offset RangeET
+12 to +44
Flush Target: ET +12
Lug TorqueM14 x 1.5
130 ft-lbs
176 Nm • Conical Seat
Fastener: Conical 60 Degree Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2025 Jeep Gladiator Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 7,700 lbs
Max Towing (Braked)
7,700 lbs
3,493 kg
With factory trailer brakes
Max Payload Capacity
1,725 lbs
782 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
770 lbs
349 kg
Maximum hitch downward load
Hitch Receiver Class
Class III (2-inch Receiver)
Weight distribution rated
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2025 Gladiator
Selected Load: 7,700 lbs • Vehicle Rating: 7,700 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Sport trim with 3.6L Pentastar V6, automatic transmission, 4.10 axle ratio, and Max Tow Package package reaches 7,700 lbs.

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 1500 lbs (680 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2025 Jeep Gladiator Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2025 Jeep Gladiator? The factory bolt pattern is 5x127 (5-lug) with a 71.5 mm center bore. The manufacturer specified wheel lug torque is 130 ft-lbs (176 Nm) using M14 x 1.5 Lug Nuts with a Conical 60 Degree seating surface. Safe wheel offset range is +12mm to +44mm.

Factory OEM Wheel & Tire Configurations (2025)

2 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
Sport / Overland (17"-18") 17x7.5 ET+44.45
245/75R17 Compare ⚡
36 PSI Find Tires →
Rubicon / Mojave (17" 33" All-Terrain / Mud-Terrain) 17x7.5 ET+37.15
LT285/70R17 (33" Falken Wildpeak) Compare ⚡
37 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Jeep Gladiator factory 71.5 mm hub snout.

Factory Hub: 71.5mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +1.6 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 71.5mm (OD: 73.1mm / ID: 71.5mm)
🛒 Order 73.1mm to 71.5mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 7.5" ET44.45
New Wheel Width:8.5" (+1.0" vs OEM)
New Wheel Offset (ET):ET34.45 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x127
2020-2026 FITMENT SPECIFICATION

2025 Jeep Gladiator

fitmentspec.com/jeep/gladiator/2025
FINAL TORQUE130 ft-lbs(176 Nm)
Bolt Pattern (PCD)5x127
Center Bore71.5 mm
Fastener & ThreadM14 x 1.5Lug Nut • Conical 60 Degree
TPMS CalibrationDirect Tire Pressure SensorDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x127 bolt pattern and 71.5 mm hub bore.

✓ No Centering Rings Required
2017-202671.5 mm CB
Chrysler Pacifica
Torque: 130 ft-lbsSpecs →
2011-202671.5 mm CB
Dodge Durango
Torque: 130 ft-lbsSpecs →
2018-202671.5 mm CB
Dodge Durango
Torque: 130 ft-lbsSpecs →
2021-202671.5 mm CB
Jeep Grand Cherokee
Torque: 130 ft-lbsSpecs →
2021-202671.5 mm CB
Jeep Grand Cherokee L
Torque: 130 ft-lbsSpecs →
2018-202671.5 mm CB
Jeep Wrangler
Torque: 130 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Significant DifferenceDiameter: +1.24" (+3.94%)
+3.94%
Original Baseline Tire245/75R17
New Target Tire285/70R17
QUICK SIZES:
31.5"32.7"
Speedometer Variance Table
30 mph gauge31.2 actual+1.2 mph
45 mph gauge46.8 actual+1.8 mph
60 mph gauge62.4 actual+2.4 mph
70 mph gauge72.8 actual+2.8 mph
80 mph gauge83.2 actual+3.2 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
235/80R16
Mounted on 16x6.5" Wheel
PCD: 5x127
Center Bore: 71.5 mm
🛡️ Technical Benefits for 2025 Jeep Gladiator
⛷️ Higher Ground Pressure
A narrower tire (235mm vs 245mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+5% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TIRE PRESSURE SENSOR TPMS433 MHz
Architecture
Indirect Wheel Speed ABS
Sensor Part Number
68313387AB
Relearn Protocol
Automatic Drive Calibration
Relearn Sequence0 / 1 Steps Complete
1
Inflate all tires including spare to door jamb specification (36-37 PSI). Drive above 15 mph for up to 20 minutes continuously for automatic synchronization.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2025 Gladiator

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2025 Jeep Gladiator)

8 Verified Q&As
Q What is the bolt pattern for a 2025 Jeep Gladiator?
The factory bolt pattern (PCD) for the 2025 Jeep Gladiator is 5x127 (5-lug configuration) with a pitch circle diameter of 127 mm. Center bore hub diameter is 71.5 mm.
Q What is the wheel lug torque specification for a 2025 Jeep Gladiator?
The official factory wheel lug torque specification for the 2025 Jeep Gladiator is 130 ft-lbs (176 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2025 Jeep Gladiator?
The official maximum braked towing capacity for the 2025 Jeep Gladiator is 7,700 lbs (3,493 kg) with a maximum tongue weight limit of 770 lbs. Recommended hitch receiver: Class III (2-inch Receiver). Unbraked trailer limit is 1,500 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2025 Jeep Gladiator?
Factory stock tire sizing for the 2025 Jeep Gladiator is 245/75R17 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2025 Jeep Gladiator and are hub centric rings needed?
The center bore diameter is exactly 71.5 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 71.5mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2025 Jeep Gladiator use?
The 2025 Jeep Gladiator utilizes M14 x 1.5 Lug Nuts with a Conical 60 Degree seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2025 Jeep Gladiator have Direct or Indirect TPMS and how is it reset?
This vehicle utilizes standard valve stems without requiring active electronic TPMS sensor recalibration.
Q What aftermarket wheel offset and tire sizes fit a 2025 Jeep Gladiator without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +12mm and +44mm with a flush target of ET +12. Always test clearance at full steering lock.