FitmentSpec Logo
Jeep logo
5th Gen (WL) (2021–2026)

2022 Jeep Grand Cherokee

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2022 Jeep Grand Cherokee
Factory Powertrain 3.6L Pentastar V6 with VVT
293 HP (218 kW) 260 lb-ft 3.6L V6
Chassis Dimensions Exterior & Curb Weight
L: 193.5" W: 77.5" WB: 116.7" 4,233 – 5,045 lbs lbs
Bolt Pattern5-Lug
5x127
Center BoreHub Centric
71.5 mm
Hub Ring Spigot Diameter
Offset RangeET
+35 to +56.4
Flush Target: ET +40
Lug TorqueM14x1.5
130 ft-lbs
176 Nm • Conical Seat
Fastener: Conical 60° Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2022 Jeep Grand Cherokee Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 7,200 lbs
Max Towing (Braked)
7,200 lbs
3,266 kg
With factory trailer brakes
Max Payload Capacity
1,410 lbs
640 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
720 lbs
327 kg
Maximum hitch downward load
Hitch Receiver Class
Class IV (2-inch Receiver)
Weight distribution rated
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2022 Grand Cherokee
Selected Load: 7,200 lbs • Vehicle Rating: 7,200 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Up to 7,200 lbs with 5.7L HEMI V8 (or 6,200 lbs with standard 3.6L Pentastar V6) when equipped with factory Class IV Trailer Tow Prep Group.

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 1500 lbs (680 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2022 Jeep Grand Cherokee Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2022 Jeep Grand Cherokee? The factory bolt pattern is 5x127 (5-lug) with a 71.5 mm center bore. The manufacturer specified wheel lug torque is 130 ft-lbs (176 Nm) using M14x1.5 Lug Nuts with a Conical 60° seating surface. Safe wheel offset range is +35mm to +56.4mm.

Factory OEM Wheel & Tire Configurations (2022)

2 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
Laredo / Limited 18x8 ET+50
265/60R18 Compare ⚡
36 / 36 PSI Find Tires →
Overland / Summit 20x8.5 ET+50
265/50R20 Compare ⚡
36 / 36 PSI Find Tires →

🔧 Technical Service Bulletins (TSB) & Suspension Chronic Issues

1 DOCUMENTED ISSUES
Front Steering Knuckle Pinch Bolt Loss of Clamping High Severity
Symptom

Unusual front suspension popping noise or steering instability when driving over bumps

Root Cause & TSB Details

Front upper ball joint pinch bolt improperly seated during factory assembly (NHTSA Safety Recall 24V-132 / FCA TSB 08-042-22)

Affected Components: Front Upper Ball JointSteering Knuckle Pinch Bolt
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Jeep Grand Cherokee factory 71.5 mm hub snout.

Factory Hub: 71.5mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +1.6 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 71.5mm (OD: 73.1mm / ID: 71.5mm)
🛒 Order 73.1mm to 71.5mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 8" ET50
New Wheel Width:9.0" (+1.0" vs OEM)
New Wheel Offset (ET):ET40 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x127
2021-2026 FITMENT SPECIFICATION

2022 Jeep Grand Cherokee

fitmentspec.com/jeep/grand-cherokee/2022
FINAL TORQUE130 ft-lbs(176 Nm)
Bolt Pattern (PCD)5x127
Center Bore71.5 mm
Fastener & ThreadM14x1.5Lug Nut • Conical 60°
TPMS CalibrationDirectDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x127 bolt pattern and 71.5 mm hub bore.

✓ No Centering Rings Required
2017-202671.5 mm CB
Chrysler Pacifica
Torque: 130 ft-lbsSpecs →
2011-202671.5 mm CB
Dodge Durango
Torque: 130 ft-lbsSpecs →
2018-202671.5 mm CB
Dodge Durango
Torque: 130 ft-lbsSpecs →
2020-202671.5 mm CB
Jeep Gladiator
Torque: 130 ft-lbsSpecs →
2021-202671.5 mm CB
Jeep Grand Cherokee L
Torque: 130 ft-lbsSpecs →
2018-202671.5 mm CB
Jeep Wrangler
Torque: 130 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +2.19" (+7.17%)
+7.17%
Original Baseline Tire265/60R18
New Target Tire285/70R17
QUICK SIZES:
30.5"32.7"
Speedometer Variance Table
30 mph gauge32.2 actual+2.2 mph
45 mph gauge48.2 actual+3.2 mph
60 mph gauge64.3 actual+4.3 mph
70 mph gauge75.0 actual+5.0 mph
80 mph gauge85.7 actual+5.7 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
255/65R17
Mounted on 17x7.0" Wheel
PCD: 5x127
Center Bore: 71.5 mm
🛡️ Technical Benefits for 2022 Jeep Grand Cherokee
⛷️ Higher Ground Pressure
A narrower tire (255mm vs 265mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+5% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TPMS433 MHz
Architecture
Direct Valve Stem Transducer
Sensor Part Number
N/A (ABS Sensor)
Relearn Protocol
Drive-Cycle
Relearn Sequence0 / 3 Steps Complete
1
Set all cold tire pressures to vehicle placard
2
Drive vehicle continuously above 15 mph for at least 15 minutes
3
TPMS module automatically registers new IDs
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →

🔍 Pre-Purchase Fitment & Chassis Inspection Checklist

Universal 8-Point Buyer Guide →

✓ Wheel Hub & Bearing Inspection

  • • Check 71.5mm hub face for rust buildup.
  • • Inspect 5x127 bolt pattern lug threads.

✓ Suspension & Steering Clearance

  • • On Quadra-Lift air suspension models, inspect air springs for slow leak-down overnight.
  • • Check front upper control arm pinch bolt recall status.
Brake Caliper Clearance Note

18-inch minimum wheel diameter required to clear front brake calipers.

Common Wear Replacement Parts

📋 One-Click Forum Spec Exporter

Export verified specs for enthusiast forums (vBulletin, XenForo, Reddit).

🔩

Verified Hardware & Installation Kit for 2022 Grand Cherokee

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2022 Jeep Grand Cherokee)

8 Verified Q&As
Q What is the bolt pattern for a 2022 Jeep Grand Cherokee?
The factory bolt pattern (PCD) for the 2022 Jeep Grand Cherokee is 5x127 (5-lug configuration) with a pitch circle diameter of 127 mm. Center bore hub diameter is 71.5 mm.
Q What is the wheel lug torque specification for a 2022 Jeep Grand Cherokee?
The official factory wheel lug torque specification for the 2022 Jeep Grand Cherokee is 130 ft-lbs (176 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2022 Jeep Grand Cherokee?
The official maximum braked towing capacity for the 2022 Jeep Grand Cherokee is 7,200 lbs (3,266 kg) with a maximum tongue weight limit of 720 lbs. Recommended hitch receiver: Class IV (2-inch Receiver). Unbraked trailer limit is 1,500 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2022 Jeep Grand Cherokee?
Factory stock tire sizing for the 2022 Jeep Grand Cherokee is 265/60R18 with a recommended cold tire pressure of 36 PSI front and 36 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2022 Jeep Grand Cherokee and are hub centric rings needed?
The center bore diameter is exactly 71.5 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 71.5mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2022 Jeep Grand Cherokee use?
The 2022 Jeep Grand Cherokee utilizes M14x1.5 Lug Nuts with a Conical 60° seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2022 Jeep Grand Cherokee have Direct or Indirect TPMS and how is it reset?
It features a Direct TPMS system utilizing physical valve-stem pressure sensors operating at 433 MHz. The relearn protocol is Drive-Cycle: Set all cold tire pressures to vehicle placard
Q What aftermarket wheel offset and tire sizes fit a 2022 Jeep Grand Cherokee without rubbing?
For an aggressive yet flush aesthetic without fender rolling or rubbing, the recommended setup is 20x9.0 ET+35 wheels with 275/50R20 tires. For a 100% rub-free conservative upgrade, choose 20x8.5 ET+45 with 265/50R20. Factory safe offset range spans +35mm to +56.4mm.