FitmentSpec Logo
Lincoln logo
4th Gen (U554 Facelift) (2018–2026)

2019 Lincoln Navigator

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2019 Lincoln Navigator
Factory Powertrain Powertrain
440 HP
Chassis Dimensions Exterior & Curb Weight
WB: 120.9"
Bolt Pattern6-Lug
6x135
Center BoreHub Centric
87.1 mm
Hub Ring Spigot Diameter
Offset RangeET
+25 to +48
Flush Target: ET +20
Lug TorqueM14 x 1.5
150 ft-lbs
203 Nm • Conical Seat
Fastener: Conical 60 Degree Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2019 Lincoln Navigator Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 8,700 lbs
Max Towing (Braked)
8,700 lbs
3,946 kg
With factory trailer brakes
Max Payload Capacity
1,580 lbs
717 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
870 lbs
395 kg
Maximum hitch downward load
Hitch Receiver Class
Class IV (2-inch Receiver)
Weight distribution rated
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2019 Navigator
Selected Load: 8,700 lbs • Vehicle Rating: 8,700 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

8,700 lbs with 3.5L Twin-Turbo V6 and Heavy-Duty Trailer Tow Package including Pro Trailer Backup Assist and trailer brake controller.

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 1500 lbs (680 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2019 Lincoln Navigator Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2019 Lincoln Navigator? The factory bolt pattern is 6x135 (6-lug) with a 87.1 mm center bore. The manufacturer specified wheel lug torque is 150 ft-lbs (203 Nm) using M14 x 1.5 Lug Nuts with a Conical 60 Degree seating surface. Safe wheel offset range is +25mm to +48mm.

Factory OEM Wheel & Tire Configurations (2019)

1 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
Factory Spec Package 22x9.5 ET44
285/45R22 Compare ⚡
32-35 PSI Placard Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Lincoln Navigator factory 87.1 mm hub snout.

Factory Hub: 87.1mm
Hub Diagnostic Result
🚨 INCOMPATIBLE WHEEL BORE (TOO SMALL)

The wheel bore (73.1 mm) is smaller than the car hub (87.1 mm). The wheel will NOT physically seat flush on the hub face without wheel spacers or center-bore machining.

💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 9.5" ET44
New Wheel Width:10.5" (+1.0" vs OEM)
New Wheel Offset (ET):ET34 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

6x135
2018-2026 FITMENT SPECIFICATION

2019 Lincoln Navigator

fitmentspec.com/lincoln/navigator/2019
FINAL TORQUE150 ft-lbs(203 Nm)
Bolt Pattern (PCD)6x135
Center Bore87.1 mm
Fastener & ThreadM14 x 1.5Lug Nut • Conical 60 Degree
TPMS CalibrationDirect (Wireless TPMS)Door Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 6x135 bolt pattern and 87.1 mm hub bore.

✓ No Centering Rings Required
2018-202687.1 mm CB
Ford Expedition
Torque: 150 ft-lbsSpecs →
2022-202687.1 mm CB
Ford Expedition
Torque: 150 ft-lbsSpecs →
2021-202687.1 mm CB
Ford F-150
Torque: 150 ft-lbsSpecs →
🔄

Cross-Vehicle OEM Wheel Swap Compatibility (6x135)

Verified OEM donor vehicles whose factory wheels fit the Lincoln Navigator hub (87.1mm).

Wheel Swap Calculator →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Within Normal ToleranceDiameter: +0.61" (+1.90%)
+1.90%
Original Baseline Tire285/45R22
New Target Tire285/70R17
QUICK SIZES:
32.1"32.7"
Speedometer Variance Table
30 mph gauge30.6 actual+0.6 mph
45 mph gauge45.9 actual+0.9 mph
60 mph gauge61.1 actual+1.1 mph
70 mph gauge71.3 actual+1.3 mph
80 mph gauge81.5 actual+1.5 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
265/55R20
Mounted on 20x8.5" Wheel
PCD: 6x135
Center Bore: 87.1 mm
🛡️ Technical Benefits for 2019 Lincoln Navigator
⛷️ Higher Ground Pressure
A narrower tire (265mm vs 285mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+10% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT (WIRELESS TPMS) TPMS433 MHz / 315 MHz MHz
Architecture
Indirect Wheel Speed ABS
Sensor Part Number
OEM Precision Sensor
Relearn Protocol
Auto-Relearn
Relearn Sequence0 / 2 Steps Complete
1
Inflate cold tires to door placard pressure.
2
Drive vehicle above 20 mph for 15-20 minutes for auto-sync.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →

📋 One-Click Forum Spec Exporter

Export verified specs for enthusiast forums (vBulletin, XenForo, Reddit).

🔩

Verified Hardware & Installation Kit for 2019 Navigator

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2019 Lincoln Navigator)

8 Verified Q&As
Q What is the bolt pattern for a 2019 Lincoln Navigator?
The factory bolt pattern (PCD) for the 2019 Lincoln Navigator is 6x135 (6-lug configuration) with a pitch circle diameter of 135 mm. Center bore hub diameter is 87.1 mm.
Q What is the wheel lug torque specification for a 2019 Lincoln Navigator?
The official factory wheel lug torque specification for the 2019 Lincoln Navigator is 150 ft-lbs (203 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2019 Lincoln Navigator?
The official maximum braked towing capacity for the 2019 Lincoln Navigator is 8,700 lbs (3,946 kg) with a maximum tongue weight limit of 870 lbs. Recommended hitch receiver: Class IV (2-inch Receiver). Unbraked trailer limit is 1,500 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2019 Lincoln Navigator?
Factory stock tire sizing for the 2019 Lincoln Navigator is 285/45R22 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2019 Lincoln Navigator and are hub centric rings needed?
The center bore diameter is exactly 87.1 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 87.1mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2019 Lincoln Navigator use?
The 2019 Lincoln Navigator utilizes M14 x 1.5 Lug Nuts with a Conical 60 Degree seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2019 Lincoln Navigator have Direct or Indirect TPMS and how is it reset?
This vehicle utilizes standard valve stems without requiring active electronic TPMS sensor recalibration.
Q What aftermarket wheel offset and tire sizes fit a 2019 Lincoln Navigator without rubbing?
For an aggressive yet flush aesthetic without fender rolling or rubbing, the recommended setup is 22x9.5 ET44 wheels with 285/45R22 tires. For a 100% rub-free conservative upgrade, choose 22x9.5 ET44 with 285/45R22. Factory safe offset range spans +25mm to +48mm.