2023 Ram 1500
Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.
2023 Ram 1500 Towing Capacity & Hitch Telemetry
Official manufacturer braked tow ratings, max tongue weight, and payload limits.
Light duty towing up to 1,000 lbs. Recommended primarily for hitch-mounted accessories (bike racks, ski racks, cargo baskets).
- • Unbraked trailer maximum limit: 350 lbs (159 kg).
- • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
- • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.
2023 Ram 1500 Quick Fitment Answers
Looking for exact hub and wheel specifications for the 2023 Ram 1500? The factory bolt pattern is 6x139.7 (6-lug) with a 77.8 mm center bore. The manufacturer specified wheel lug torque is 130 ft-lbs (176 Nm) using M14x1.5 Lug Nuts with a Conical 60° seating surface. Safe wheel offset range is +10mm to +35mm.
Factory OEM Wheel & Tire Configurations (2023)
2 TRIM OPTIONS| Trim Name | Wheel Size | Tire Specification | Placard PSI | Equipment |
|---|---|---|---|---|
| Tradesman / Bighorn | 18x8 ET+19 | 275/65R18
Compare ⚡
| 36 / 36 PSI | Find Tires → |
| Laramie / Limited | 20x9 ET+19 | 275/55R20
Compare ⚡
| 36 / 36 PSI | Find Tires → |
🔧 Technical Service Bulletins (TSB) & Suspension Chronic Issues
1 DOCUMENTED ISSUESHigh-pitched whining or groaning noise on deceleration from 55 mph to 40 mph
Improper pinion pre-load and bearing wear in 9.25-inch rear axle (Stellantis TSB 03-001-20)
Hub Centric Ring Finder & Vibration Eliminator
Precision adapter sizing for Ram 1500 factory 77.8 mm hub snout.
The wheel bore (73.1 mm) is smaller than the car hub (77.8 mm). The wheel will NOT physically seat flush on the hub face without wheel spacers or center-bore machining.
OEM vs. Aftermarket Visual Stance & Poke Gauge
Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.
Printable Mechanic Spec Card & Torque Sequence
High-contrast pocket card for tire shops, track days, and garage toolboxes.
2023 Ram 1500
fitmentspec.com/ram/1500/2023DIRECT HUB-CENTRIC WHEEL INTERCHANGE
Vehicles sharing both the exact 6x139.7 bolt pattern and 77.8 mm hub bore.
Cross-Vehicle OEM Wheel Swap Compatibility (6x139.7)
Verified OEM donor vehicles whose factory wheels fit the Ram 1500 hub (77.8mm).
Jeep Wagoneer

Nissan Armada

Cadillac Escalade
Chevrolet Colorado

Chevrolet Silverado 1500

Chevrolet Silverado 1500

Chevrolet Suburban

Chevrolet Tahoe
⚡ Will It Rub? 2D Offset & Strut Clearance
Real-time inner strut clearance and outer fender poke calculation.
WINTER WHEEL & MINUS-SIZING ADVISOR
Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.
📡 TPMS Protocol & Relearn Procedure
US OEM Sensor Protocol & Step-by-Step Calibration
🔍 Pre-Purchase Fitment & Chassis Inspection Checklist
Universal 8-Point Buyer Guide →✓ Wheel Hub & Bearing Inspection
- • Inspect 77.8mm hub center bore for rust scale.
- • Verify 6-lug pattern (2019+ DT uses 6-lug, 2018 DS used 5-lug).
✓ Suspension & Steering Clearance
- • Check rear coil spring or air suspension bellow integrity.
- • Inspect upper control arm ball joints for play.
18-inch minimum wheel diameter required to clear heavy-duty front dual-piston calipers.
📋 One-Click Forum Spec Exporter
Export verified specs for enthusiast forums (vBulletin, XenForo, Reddit).