FitmentSpec Logo
Tesla logo
Highland Refreshed (RWD / Long Range AWD / Performance AWD) (2024–2026)

2024 Tesla Model 3

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2024 Tesla Model 3
OEM Powertrain Standard Specification
Chassis Dimensions Exterior & Curb Weight
Center BoreHub Centric
64.1 mm
Hub Ring Spigot Diameter
Offset RangeET
+35 to +45
Flush Target: ET +38
Lug TorqueM14 x 1.5
129 ft-lbs
175 Nm • Conical Seat
Fastener: Conical Seat 60 Degree Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2024 Tesla Model 3 Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 2,200 lbs
Max Towing (Braked)
2,200 lbs
998 kg
With factory trailer brakes
Max Payload Capacity
954 lbs
433 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
220 lbs
100 kg
Maximum hitch downward load
Hitch Receiver Class
Class I/II (High-strength steel receiver)
Standard bumper / ball mount
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2024 Model 3
Selected Load: 2,200 lbs • Vehicle Rating: 2,200 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

Factory tow hitch option available in European and select global markets rated at 1,000 kg (2,200 lbs) braked. US models uncertified by Tesla for towing.

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 770 lbs (349 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2024 Tesla Model 3 Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2024 Tesla Model 3? The factory bolt pattern is 5x114.3 (5-lug) with a 64.1 mm center bore. The manufacturer specified wheel lug torque is 129 ft-lbs (175 Nm) using M14 x 1.5 Lug Nuts with a Conical Seat 60 Degree seating surface. Safe wheel offset range is +35mm to +45mm.

Factory OEM Wheel & Tire Configurations (2024)

1 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
Performance (20" Warp Forged Wheels with Carbon Fiber Inserts) 20x9 ET+34
235/35R20 (Pirelli P Zero 4) Compare ⚡
42 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Tesla Model 3 factory 64.1 mm hub snout.

Factory Hub: 64.1mm
Hub Diagnostic Result
✅ HUB CENTRIC RINGS REQUIRED

The wheel bore is +9.0 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:

73.1mm to 64.1mm (OD: 73.1mm / ID: 64.1mm)
🛒 Order 73.1mm to 64.1mm Ring Set on Amazon↗
💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 9" ET34
New Wheel Width:10.0" (+1.0" vs OEM)
New Wheel Offset (ET):ET24 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

5x114.3
2024-2026 FITMENT SPECIFICATION

2024 Tesla Model 3

fitmentspec.com/tesla/model-3/2024
FINAL TORQUE129 ft-lbs(175 Nm)
Bolt Pattern (PCD)5x114.3
Center Bore64.1 mm
Fastener & ThreadM14 x 1.5Lug Nut • Conical Seat 60 Degree
TPMS CalibrationDirectDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 5x114.3 bolt pattern and 64.1 mm hub bore.

✓ No Centering Rings Required
2013-202264.1 mm CB
Acura ILX
Torque: 129 ft-lbsSpecs →
2023-202664.1 mm CB
Acura Integra
Torque: 129 ft-lbsSpecs →
2019-202664.1 mm CB
Acura RDX
Torque: 129 ft-lbsSpecs →
2002-200664.1 mm CB
Acura RSX
Torque: 129 ft-lbsSpecs →
2004-201464.1 mm CB
Acura TSX
Torque: 129 ft-lbsSpecs →
2018-202264.1 mm CB
Honda Accord
Torque: 129 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Recalibrate RequiredDiameter: +6.23" (+23.54%)
+23.54%
Original Baseline Tire235/35R20
New Target Tire285/70R17
QUICK SIZES:
26.5"32.7"
Speedometer Variance Table
30 mph gauge37.1 actual+7.1 mph
45 mph gauge55.6 actual+10.6 mph
60 mph gauge74.1 actual+14.1 mph
70 mph gauge86.5 actual+16.5 mph
80 mph gauge98.8 actual+18.8 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
215/45R18
Mounted on 18x8.0" Wheel
PCD: 5x114.3
Center Bore: 64.1 mm
🛡️ Technical Benefits for 2024 Tesla Model 3
⛷️ Higher Ground Pressure
A narrower tire (215mm vs 235mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+10% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TPMS433 MHz
Architecture
Direct Valve Stem Transducer
Sensor Part Number
N/A (ABS Sensor)
Relearn Protocol
Auto-Relearn Drive Cycle
Relearn Sequence0 / 1 Steps Complete
1
Drive vehicle above 15 mph (25 km/h) for up to 20 minutes to automatically synchronize sensor IDs.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2024 Model 3

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2024 Tesla Model 3)

8 Verified Q&As
Q What is the bolt pattern for a 2024 Tesla Model 3?
The factory bolt pattern (PCD) for the 2024 Tesla Model 3 is 5x114.3 (5-lug configuration) with a pitch circle diameter of 114.3 mm. Center bore hub diameter is 64.1 mm.
Q What is the wheel lug torque specification for a 2024 Tesla Model 3?
The official factory wheel lug torque specification for the 2024 Tesla Model 3 is 129 ft-lbs (175 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2024 Tesla Model 3?
The official maximum braked towing capacity for the 2024 Tesla Model 3 is 2,200 lbs (998 kg) with a maximum tongue weight limit of 220 lbs. Recommended hitch receiver: Class I/II (High-strength steel receiver). Unbraked trailer limit is 770 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2024 Tesla Model 3?
Factory stock tire sizing for the 2024 Tesla Model 3 is 235/35R20 (Pirelli P Zero 4) with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2024 Tesla Model 3 and are hub centric rings needed?
The center bore diameter is exactly 64.1 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 64.1mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2024 Tesla Model 3 use?
The 2024 Tesla Model 3 utilizes M14 x 1.5 Lug Nuts with a Conical Seat 60 Degree seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2024 Tesla Model 3 have Direct or Indirect TPMS and how is it reset?
It features a Direct TPMS system utilizing physical valve-stem pressure sensors operating at 433 MHz. The relearn protocol is Auto-Relearn Drive Cycle: Drive vehicle above 15 mph (25 km/h) for up to 20 minutes to automatically synchronize sensor IDs.
Q What aftermarket wheel offset and tire sizes fit a 2024 Tesla Model 3 without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +35mm and +45mm with a flush target of ET +38. Always test clearance at full steering lock.