2020 Honda Accord
Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.
2020 Honda Accord Towing Capacity & Hitch Telemetry
Official manufacturer braked tow ratings, max tongue weight, and payload limits.
1,000 lbs capacity on 1.5L Turbo gas models. American Honda does not recommend trailer towing for Accord Hybrid.
- • Unbraked trailer maximum limit: 350 lbs (159 kg).
- • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
- • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.
2020 Honda Accord Quick Fitment Answers
Looking for exact hub and wheel specifications for the 2020 Honda Accord? The factory bolt pattern is 5x114.3 (5-lug) with a 64.1 mm center bore. The manufacturer specified wheel lug torque is 80 ft-lbs (108 Nm) using M12x1.5 Lug Nuts with a Conical 60° seating surface. Safe wheel offset range is +35mm to +50mm.
Factory OEM Wheel & Tire Configurations (2020)
2 TRIM OPTIONS| Trim Name | Wheel Size | Tire Specification | Placard PSI | Equipment |
|---|---|---|---|---|
| LX / EX | 17x7.5 ET+45 | 225/50R17
Compare ⚡
| 32 / 32 PSI | Find Tires → |
| Sport / Touring 2.0T | 19x8.5 ET+50 | 235/40R19
Compare ⚡
| 33 / 33 PSI | Find Tires → |
🔧 Technical Service Bulletins (TSB) & Suspension Chronic Issues
1 DOCUMENTED ISSUESMisfires upon cold startup, white exhaust smoke, or illuminated check engine light (P0300-P0304)
Head gasket breach between cylinders 2 and 3 and carbon accumulation on high-pressure direct fuel injectors (Honda TSB 22-045)
Hub Centric Ring Finder & Vibration Eliminator
Precision adapter sizing for Honda Accord factory 64.1 mm hub snout.
The wheel bore is +9.0 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:
OEM vs. Aftermarket Visual Stance & Poke Gauge
Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.
Printable Mechanic Spec Card & Torque Sequence
High-contrast pocket card for tire shops, track days, and garage toolboxes.
2020 Honda Accord
fitmentspec.com/honda/accord/2020DIRECT HUB-CENTRIC WHEEL INTERCHANGE
Vehicles sharing both the exact 5x114.3 bolt pattern and 64.1 mm hub bore.
Cross-Vehicle OEM Wheel Swap Compatibility (5x114.3)
Verified OEM donor vehicles whose factory wheels fit the Honda Accord hub (64.1mm).
Acura ILX

Acura Integra

Acura RDX

Acura RSX

Acura TSX

Honda Civic
Honda Civic Si
Honda CR-V
⚡ Will It Rub? 2D Offset & Strut Clearance
Real-time inner strut clearance and outer fender poke calculation.
WINTER WHEEL & MINUS-SIZING ADVISOR
Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.
📡 TPMS Protocol & Relearn Procedure
US OEM Sensor Protocol & Step-by-Step Calibration
🔍 Pre-Purchase Fitment & Chassis Inspection Checklist
Universal 8-Point Buyer Guide →✓ Wheel Hub & Bearing Inspection
- • Check 64.1mm hub concentricity.
- • Inspect front hub bearings for high-mileage road humming.
✓ Suspension & Steering Clearance
- • Check electronic adaptive damper harness plugs on Touring trims.
- • Inspect front strut top mount bushings.
Factory 17-inch wheels clear front calipers; 16-inch wheels will not clear the 312mm front rotors on 2.0T models.
📋 One-Click Forum Spec Exporter
Export verified specs for enthusiast forums (vBulletin, XenForo, Reddit).