2024 Honda CR-V
Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.
2024 Honda CR-V Towing Capacity & Hitch Telemetry
Official manufacturer braked tow ratings, max tongue weight, and payload limits.
1,500 lbs towing on 1.5L Turbo gas models (1,000 lbs on Sport Hybrid). Best suited for lightweight utility trailers and hitch-mounted bike racks/cargo boxes.
- • Unbraked trailer maximum limit: 525 lbs (238 kg).
- • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
- • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.
2024 Honda CR-V Quick Fitment Answers
Looking for exact hub and wheel specifications for the 2024 Honda CR-V? The factory bolt pattern is 5x114.3 (5-lug) with a 64.1 mm center bore. The manufacturer specified wheel lug torque is 80 ft-lbs (108 Nm) using M12x1.5 Lug Nuts with a Conical 60° seating surface. Safe wheel offset range is +38mm to +50mm.
Factory OEM Wheel & Tire Configurations (2024)
2 TRIM OPTIONS| Trim Name | Wheel Size | Tire Specification | Placard PSI | Equipment |
|---|---|---|---|---|
| EX / Sport Hybrid | 18x7.5 ET+45 | 235/60R18
Compare ⚡
| 33 / 33 PSI | Find Tires → |
| Sport Touring Hybrid | 19x7.5 ET+45 | 235/55R19
Compare ⚡
| 33 / 33 PSI | Find Tires → |
🔧 Technical Service Bulletins (TSB) & Suspension Chronic Issues
1 DOCUMENTED ISSUESSticky, momentary resistance when making subtle steering corrections at highway speeds (50-70 mph)
Improper grease distribution in the steering gearbox worm wheel assembly (Honda TSB 23-037 / NHTSA Action)
Hub Centric Ring Finder & Vibration Eliminator
Precision adapter sizing for Honda CR-V factory 64.1 mm hub snout.
The wheel bore is +9.0 mm larger than the vehicle hub. To prevent steering wheel wobble at 50–75 mph, install this exact ring set:
OEM vs. Aftermarket Visual Stance & Poke Gauge
Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.
Printable Mechanic Spec Card & Torque Sequence
High-contrast pocket card for tire shops, track days, and garage toolboxes.
2024 Honda CR-V
fitmentspec.com/honda/cr-v/2024DIRECT HUB-CENTRIC WHEEL INTERCHANGE
Vehicles sharing both the exact 5x114.3 bolt pattern and 64.1 mm hub bore.
Cross-Vehicle OEM Wheel Swap Compatibility (5x114.3)
Verified OEM donor vehicles whose factory wheels fit the Honda CR-V hub (64.1mm).
Acura ILX

Acura Integra

Acura RDX

Acura RSX

Acura TSX

Honda Accord

Honda Accord

Honda Civic
⚡ Will It Rub? 2D Offset & Strut Clearance
Real-time inner strut clearance and outer fender poke calculation.
WINTER WHEEL & MINUS-SIZING ADVISOR
Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.
📡 TPMS Protocol & Relearn Procedure
US OEM Sensor Protocol & Step-by-Step Calibration
🔍 Pre-Purchase Fitment & Chassis Inspection Checklist
Universal 8-Point Buyer Guide →✓ Wheel Hub & Bearing Inspection
- • Verify 64.1mm hub faces are cleaned of corrosion during wheel swaps.
- • Check wheel lug torque.
✓ Suspension & Steering Clearance
- • Inspect front strut clearances with larger tire setups.
- • Check rear independent multi-link trailing arms.
17-inch minimum rim diameter recommended to guarantee proper caliper clearance.
📋 One-Click Forum Spec Exporter
Export verified specs for enthusiast forums (vBulletin, XenForo, Reddit).