2023 Toyota 4Runner
Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.
2023 Toyota 4Runner Towing Capacity & Hitch Telemetry
Official manufacturer braked tow ratings, max tongue weight, and payload limits.
Body-on-frame platform with integrated tow hitch rated at 5,000 lbs (or 6,000 lbs on 6th-gen i-FORCE MAX hybrid).
- • Unbraked trailer maximum limit: 1500 lbs (680 kg).
- • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
- • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.
2023 Toyota 4Runner Quick Fitment Answers
Looking for exact hub and wheel specifications for the 2023 Toyota 4Runner? The factory bolt pattern is 6x139.7 (6-lug) with a 106.1 mm center bore. The manufacturer specified wheel lug torque is 83 ft-lbs (112 Nm) using M12x1.5 Lug Nuts with a Conical 60° (Aftermarket) / Mag Flat (OEM) seating surface. Safe wheel offset range is +-10mm to +30mm.
Factory OEM Wheel & Tire Configurations (2023)
2 TRIM OPTIONS| Trim Name | Wheel Size | Tire Specification | Placard PSI | Equipment |
|---|---|---|---|---|
| SR5 / Trail / TRD Off-Road | 17x7.5 ET+15 | 265/70R17
Compare ⚡
| 32 / 32 PSI | Find Tires → |
| Limited / Nightshade | 20x7 ET+15 | 245/60R20
Compare ⚡
| 32 / 32 PSI | Find Tires → |
🔧 Technical Service Bulletins (TSB) & Suspension Chronic Issues
1 DOCUMENTED ISSUESSteering wheel vibration specifically between 58 and 62 mph
Needle bearing wear in driver side front differential tube; replaced with solid ECGS bushing
Hub Centric Ring Finder & Vibration Eliminator
Precision adapter sizing for Toyota 4Runner factory 106.1 mm hub snout.
The wheel bore (73.1 mm) is smaller than the car hub (106.1 mm). The wheel will NOT physically seat flush on the hub face without wheel spacers or center-bore machining.
OEM vs. Aftermarket Visual Stance & Poke Gauge
Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.
Printable Mechanic Spec Card & Torque Sequence
High-contrast pocket card for tire shops, track days, and garage toolboxes.
2023 Toyota 4Runner
fitmentspec.com/toyota/4runner/2023Cross-Vehicle OEM Wheel Swap Compatibility (6x139.7)
Verified OEM donor vehicles whose factory wheels fit the Toyota 4Runner hub (106.1mm).

Cadillac Escalade
Chevrolet Colorado

Chevrolet Silverado 1500

Chevrolet Silverado 1500

Chevrolet Suburban

Chevrolet Tahoe

Ford Bronco
Ford Bronco Raptor
⚡ Will It Rub? 2D Offset & Strut Clearance
Real-time inner strut clearance and outer fender poke calculation.
WINTER WHEEL & MINUS-SIZING ADVISOR
Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.
📡 TPMS Protocol & Relearn Procedure
US OEM Sensor Protocol & Step-by-Step Calibration
🔍 Pre-Purchase Fitment & Chassis Inspection Checklist
Universal 8-Point Buyer Guide →✓ Wheel Hub & Bearing Inspection
- • Inspect front wheel bearings for play or hum during 45-60 mph highway driving.
- • Verify driver side CV axle stub has no excessive vertical radial play at diff output.
✓ Suspension & Steering Clearance
- • Inspect front sway bar end links and KDSS hydraulic cylinder boots if equipped.
- • Inspect factory upper control arm ball joints for grease weeping.
Factory front 4-piston calipers require minimum 17-inch wheels. Certain aftermarket 17-inch wheels with high backspacing may touch caliper face.
📋 One-Click Forum Spec Exporter
Export verified specs for enthusiast forums (vBulletin, XenForo, Reddit).