FitmentSpec Logo
Toyota logo
3rd Gen XK70 (SR5 / Limited / Platinum / TRD Pro / Capstone i-FORCE MAX) (2023–2026)

2024 Toyota Sequoia

Wheel fitment, bolt pattern, TPMS calibration, and factory engineering specifications.

2024 Toyota Sequoia
OEM Powertrain Standard Specification
Chassis Dimensions Exterior & Curb Weight
Center BoreHub Centric
95.1 mm
Hub Ring Spigot Diameter
Offset RangeET
+45 to +60
Flush Target: ET +50
Lug TorqueM14 x 1.5
97 ft-lbs
131 Nm • Mag Seat
Fastener: Mag Seat with Flat Washer Lug Nut. Always re-torque after 50–100 miles of driving.Get Torque Wrench→
⚠️
Mandatory Verification Notice: Bolt patterns, hub tolerances, and torque values vary by factory brake option and trim. Always verify specs with your vehicle's driver door-jamb safety placard or a certified mechanic prior to mounting wheels. Use of this data is strictly at your own risk. Read Full Legal Disclaimer →
⚓

2024 Toyota Sequoia Towing Capacity & Hitch Telemetry

Official manufacturer braked tow ratings, max tongue weight, and payload limits.

Certified Tow Rating: 9,520 lbs
Max Towing (Braked)
9,520 lbs
4,318 kg
With factory trailer brakes
Max Payload Capacity
1,730 lbs
785 kg
Cabin + bed passenger load
Max Tongue Weight (10%)
952 lbs
432 kg
Maximum hitch downward load
Hitch Receiver Class
Class IV (2-inch Receiver)
Weight distribution rated
🚛 Can It Tow? Real-World Trailer Capability Matcher
Click any trailer type to test compatibility against 2024 Sequoia
Selected Load: 9,520 lbs • Vehicle Rating: 9,520 lbs
At Maximum Limit (Caution)
📋 Factory Towing Guidance:

SR5 2WD models achieve an impressive 9,520 lbs with standard i-FORCE MAX Twin-Turbo V6 Hybrid (437 hp / 583 lb-ft).

⚙️ Essential Towing Safety Guidelines:
  • • Unbraked trailer maximum limit: 1500 lbs (680 kg).
  • • Trailer brakes mandatory for loads exceeding 3,000 lbs in most jurisdictions.
  • • Maintain tongue weight between 10%–15% of total gross trailer weight (GTW) to prevent dangerous trailer sway.

2024 Toyota Sequoia Quick Fitment Answers

Looking for exact hub and wheel specifications for the 2024 Toyota Sequoia? The factory bolt pattern is 6x139.7 (6-lug) with a 95.1 mm center bore. The manufacturer specified wheel lug torque is 97 ft-lbs (131 Nm) using M14 x 1.5 Lug Nuts with a Mag Seat with Flat Washer seating surface. Safe wheel offset range is +45mm to +60mm.

Factory OEM Wheel & Tire Configurations (2024)

1 TRIM OPTIONS
Trim Name Wheel Size Tire Specification Placard PSI Equipment
Capstone (22" Dark Chrome Machined-Finish Alloy) 22x8.5 ET+55
265/50R22 Compare ⚡
36 PSI Find Tires →
⭕

Hub Centric Ring Finder & Vibration Eliminator

Precision adapter sizing for Toyota Sequoia factory 95.1 mm hub snout.

Factory Hub: 95.1mm
Hub Diagnostic Result
🚨 INCOMPATIBLE WHEEL BORE (TOO SMALL)

The wheel bore (73.1 mm) is smaller than the car hub (95.1 mm). The wheel will NOT physically seat flush on the hub face without wheel spacers or center-bore machining.

💡 Pro Tip: Aluminum billet rings are recommended for track / high brake heat; polycarbonate plastic rings are ideal for salt & winter weather.
📐

OEM vs. Aftermarket Visual Stance & Poke Gauge

Simulate fender lip clearance (Poke) and inner suspension strut clearance in real time.

Stock Baseline: 8.5" ET55
New Wheel Width:9.5" (+1.0" vs OEM)
New Wheel Offset (ET):ET45 mm (-10mm vs OEM)
Wheel Spacer (Optional):+0 mm
Stance & Clearance Breakdown🔥 WIDE POKE
Outer Lip (Fender Poke)
+22.7mm
Extends outward toward fender
Inner Lip (Strut Room)
-2.7mm
Closer to suspension strut
FENDER LIPHUB FACE
Inner Strut SideOuter Wheel Face
📋

Printable Mechanic Spec Card & Torque Sequence

High-contrast pocket card for tire shops, track days, and garage toolboxes.

6x139.7
2023-2026 FITMENT SPECIFICATION

2024 Toyota Sequoia

fitmentspec.com/toyota/sequoia/2024
FINAL TORQUE97 ft-lbs(131 Nm)
Bolt Pattern (PCD)6x139.7
Center Bore95.1 mm
Fastener & ThreadM14 x 1.5Lug Nut • Mag Seat with Flat Washer
TPMS CalibrationDirectDoor Placard PSI
⭐ TORQUE SEQUENCE:Always torque in a star (criss-cross) pattern in 2 stages: 50% initial hand snug, 100% with calibrated torque wrench.
⚠️ NEVER USE IMPACT GUN FOR FINAL TORQUE
🔄

DIRECT HUB-CENTRIC WHEEL INTERCHANGE

Vehicles sharing both the exact 6x139.7 bolt pattern and 95.1 mm hub bore.

✓ No Centering Rings Required
2024-202695.1 mm CB
Lexus GX
Torque: 97 ft-lbsSpecs →
2024-202695.1 mm CB
Lexus GX 550
Torque: 97 ft-lbsSpecs →
2022-202695.1 mm CB
Lexus LX
Torque: 97 ft-lbsSpecs →
2025-202695.1 mm CB
Toyota 4Runner
Torque: 97 ft-lbsSpecs →
2024-202695.1 mm CB
Toyota Land Cruiser
Torque: 97 ft-lbsSpecs →
2024-202695.1 mm CB
Toyota Land Cruiser 250
Torque: 97 ft-lbsSpecs →

⚡ Will It Rub? 2D Offset & Strut Clearance

Real-time inner strut clearance and outer fender poke calculation.

CAUTION: Tight clearance. May contact fender under full suspension travel.
OEM Baseline18x8 ET+50
Rim Width: 8"Offset: +50mm
Target Custom Spec18x8.5 ET+40
Rim Width: 8.5"Offset: +40mm
Inner Strut Shift
-3.7 mm
More inner room
Fender Poke Shift
+16.3 mm
Extends outward
▲ Safe MatchDiameter: +0.28" (+0.85%)
+0.85%
Original Baseline Tire265/50R22
New Target Tire285/70R17
QUICK SIZES:
32.4"32.7"
Speedometer Variance Table
30 mph gauge30.3 actual+0.3 mph
45 mph gauge45.4 actual+0.4 mph
60 mph gauge60.5 actual+0.5 mph
70 mph gauge70.6 actual+0.6 mph
80 mph gauge80.7 actual+0.7 mph
❄️

WINTER WHEEL & MINUS-SIZING ADVISOR

Optimal cold-weather setup for maximum snow bite, pothole cushion, and rim protection.

OPTIMAL WINTER SPEC
245/60R20
Mounted on 20x7.5" Wheel
PCD: 6x139.7
Center Bore: 95.1 mm
🛡️ Technical Benefits for 2024 Toyota Sequoia
⛷️ Higher Ground Pressure
A narrower tire (245mm vs 265mm) concentrates vehicle weight onto a tighter contact patch, cutting cleanly through packed snow and slush down to asphalt.
🕳️ Pothole Damage Protection
The taller aspect ratio (+10% sidewall) creates an air buffer that prevents cracked alloy barrels on frost-damaged winter roads.
Brake Caliper Clearance: Verified OEM Rotor FitCompare Side-by-Side ⚡

📡 TPMS Protocol & Relearn Procedure

US OEM Sensor Protocol & Step-by-Step Calibration

DIRECT TPMS433 MHz
Architecture
Direct Valve Stem Transducer
Sensor Part Number
N/A (ABS Sensor)
Relearn Protocol
Auto-Relearn Drive Cycle
Relearn Sequence0 / 1 Steps Complete
1
Drive vehicle above 15 mph (25 km/h) for up to 20 minutes to automatically synchronize sensor IDs.
TPMS warning light won't turn off after tire rotation?Find OBD2 TPMS Activation Tools on Amazon →
🔩

Verified Hardware & Installation Kit for 2024 Sequoia

DIRECT OEM SPEC MATCH
🛡️Owner Crowd Verification(84% Verified)
Verified Fitment & Engineering FAQ

Frequently Asked Questions (2024 Toyota Sequoia)

8 Verified Q&As
Q What is the bolt pattern for a 2024 Toyota Sequoia?
The factory bolt pattern (PCD) for the 2024 Toyota Sequoia is 6x139.7 (6-lug configuration) with a pitch circle diameter of 139.7 mm. Center bore hub diameter is 95.1 mm.
Q What is the wheel lug torque specification for a 2024 Toyota Sequoia?
The official factory wheel lug torque specification for the 2024 Toyota Sequoia is 97 ft-lbs (131 Nm). Tighten all Lug Nuts in a criss-cross (star) sequence in two progressive stages using a calibrated torque wrench. Re-torque after 50 to 100 miles.
Q What is the towing capacity of a 2024 Toyota Sequoia?
The official maximum braked towing capacity for the 2024 Toyota Sequoia is 9,520 lbs (4,318 kg) with a maximum tongue weight limit of 952 lbs. Recommended hitch receiver: Class IV (2-inch Receiver). Unbraked trailer limit is 1,500 lbs.
Q What is the factory tire size and recommended cold tire pressure (PSI) for a 2024 Toyota Sequoia?
Factory stock tire sizing for the 2024 Toyota Sequoia is 265/50R22 with a recommended cold tire pressure of 35 PSI front and 35 PSI rear. Always verify exact trim cold inflation pressure on the driver door-jamb FMVSS safety placard.
Q What is the center bore size on a 2024 Toyota Sequoia and are hub centric rings needed?
The center bore diameter is exactly 95.1 mm. The hub is hub-centric, meaning wheels center precisely on the axle spigot. If installing aftermarket wheels with a larger center bore (e.g., 73.1mm), precision hub centric centering rings (73.1mm to 95.1mm) are required to eliminate high-speed steering wheel vibrations.
Q What size lug nuts and thread pitch does a 2024 Toyota Sequoia use?
The 2024 Toyota Sequoia utilizes M14 x 1.5 Lug Nuts with a Mag Seat with Flat Washer seating profile. Never mix conical aftermarket wheels with OEM ball-seat fasteners or vice-versa, as mismatched seating angles cause fastener loosening.
Q Does the 2024 Toyota Sequoia have Direct or Indirect TPMS and how is it reset?
It features a Direct TPMS system utilizing physical valve-stem pressure sensors operating at 433 MHz. The relearn protocol is Auto-Relearn Drive Cycle: Drive vehicle above 15 mph (25 km/h) for up to 20 minutes to automatically synchronize sensor IDs.
Q What aftermarket wheel offset and tire sizes fit a 2024 Toyota Sequoia without rubbing?
For a flush aftermarket stance without rubbing or cutting, maintain wheel offsets between +45mm and +60mm with a flush target of ET +50. Always test clearance at full steering lock.